Roger from Minco, Ok writes
I can hear the popping and cracking suspected sound of termites in a wall between my utility room and dining room.
Termidor FOAM should be applied into the drilled holes. You will not foam the entire wall void, rather you will drill a hole close to the top of the ceiling/stud on either side of the stud. Once the holes are in place on each side, inject the foam into each hole for 5-10 seconds, allowing the foam to expand but slide down the sides of the studs where they would travel. If you are seeing them along the baseboard areas, drill holes every 8-10 inches apart across the area between studs, about an inch or 2 above the baseboard.
Answer last updated on: 02/08/2022
