APPLICATION DIRECTIONS:

Non-fish bearing bodies of water (tailing ponds, commercial or industrial water impoundments, and decorative fountains): Apply Ecobird Bird Repellent at a rate of 2.5 gallons per acre (8 lbs. a.i. per acre) of water surface at 3-4 week intervals. Adjust timing of subsequent applications as required by bird activity and anticipated seasonal migrations. Best applied undiluted or with a surfactant approved for use in water application to ensure water surface coverage.

Landfills: Apply Ecobird Bird Repellent at a rate of 2.5 gallons per acre (8 lbs. a.i. per acre) directly to the active site face as soon as the birds start to arrive. Repeat applications as long as birds persist. Make applications with conventional spray equipment hydroseeders and other liquid equipment. Product is best applied undiluted or with surfactant to ensure uniform coverage.

Indoor Fogging Applications (Warehouses, hangers, garages, assembly plants, etc.):

Apply Ecobird Bird Repellent undiluted at a rate not to exceed one (1) ounce per 10,000 cubic feet of space to be treated. Point fog generator in the general direction of the nuisance birds, keeping the fog generator at least 5 feet away from any structure or object to allow for complete dissipation of the fog. A distance of at least 5 feet from any structure or object prevents any damage to desired materials. Expose as many birds as possible to the fog for fast and lasting results. Best product performance is achieved with a dry fog. Consult the fog generator owner's manual for proper settings to assure a dry fog. Both ULV and thermal foggers may be used to apply this product. Several treatments, 1 to 4 days apart may be required for removal of all nuisance birds.

For automated fogging applications, point the fogger in the direction of the birds or their expected approach. Set the fog generator for an appropriate duration as needed to repel target birds, such as 10 second to 5 minute fogging pulses during the time of expected bird activity.

Outdoor Fogging Applications:

General Application Directions: Apply Ecobird Bird Repellent undiluted at a rate of 6-8 ounces per acre (43,500 sq. ft.) of area to be treated. Point the fog generator in the general direction of the nuisance birds, keeping the fog generator at least 5 feet away from any structure or object to allow for complete dissipation of the fog. A distance of at least 5 feet from any structure or object prevents any damage to desired materials. best product performance is achieved with a dry fog. Consult the fog generator owner's manual for proper settings to assure a dry fog. ULV, thermal and other foggers and aerosol generating equipment with a minimum application size of < 30 microns may be used to apply this product. Several treatments, 1 to 4 days apart may be required for removal of all nuisance birds.

For automated fogging applications, point the fogger in the direction of the birds or their expected approach. Set the fog generator for an appropriate duration as needed to repel target birds, such as 10 second to 5 minute fogging pulses during the time of expected bird activity.

Electrical  Substations, Farmsteads, Agricultural sites, Structures, Buildings, Airports, and other Open Areas

Apply Ecobird Bird Repellent undiluted using a thermal or mechanical fog generator that will deliver a dry fog with a droplet size within the aerosol size range (below 30 microns). Expose as many birds as possible to the fog for fast and lasting results. Apply Ecobird Bird Repellent when birds have settled down or are roosting in the structure and/or wires of the substation. Withhold treatment until conditions favoring successful use arise (temperature, direction, and speed of wind) to be able to cover all infested structure. For best results, make applications in the evening, when most of the birds have arrived, but before it gets too dark for the birds to leave once exposed to the fog.

Trees and Shrubs

Apply Ecobird Bird Repellent undiluted using a thermal or mechanical fog generator that will deliver a dry fog with a droplet size below 20 microns that will penetrate the foliage without wetting it. Expose as many birds as possible to the fog for fast and lasting results. Apply Ecobird Bird Repellent when birds have settled down. Withhold treatment until conditions favoring successful use arise (temperature, direction, and speed of wind). For best results, make applications in the evening, when most of the birds have arrived, but before it gets too dark for the birds to leave once exposed to the fog. Application in the morning after the birds normally leave does not have much effect. To prevent damage to foliage, do not allow Ecobird Bird Repellent to accumulate to the point of runoff.

Turf (Golf courses, lawns, sports fields, parks, etc.)

Apply Ecobird Bird Repellent undiluted using a thermal or mechanical fog generator that will deliver a dry fog with a droplet size within the aerosol size range (below 30 microns) that stay suspended and do not settle to the ground. Set fogger upwind so that the wind will carry the fog in the general direction of the birds. Apply at any time of the day when birds are present. To control Canada geese, apply at any time when they are feeding or roosting, except when the sit on a nest during breeding season.

Lakes and Ponds, Harbors and Boat Docks, Aquatic Production Sites (non-fish bearing sites such as hatchery buildings and around culture ponds)

Do not apply directly to water. However, it is expected that overspray may occur. Apply when wind and drift conditions are minimal. Apply Ecobird Bird Repellent when wind and drift conditions are minimal. Apply Ecobird Bird Repellent undiluted using a thermal or mechanical fog generator that will deliver a dry fog with a droplet size below 20 microns that will stay suspended and does not settle on the water surface. Set fogger upwind so that the wind will carry the fog in the general direction of the birds. Apply as soon as birds arrive. For roosting birds, the product is best applied in the evening when most of the birds have arrived but before it gets too dark for the birds to leave.

Fruit Applications (Agricultural Uses: For application to cherries, blueberries, grapes, apples, stone fruits, (apricots, cherries, peaches, plums), cereal grains (sweet and popcorn, millet, oats, sorghum), and sunflowers)

Use this product to limit damage caused by birds on ripening crops. Withhold treatment until fruit is susceptible to bird damage. Apply Ecobird Bird Repellent undiluted using a thermal or mechanical fog generator that will deliver a dry fog with a droplet size within the aerosol size range (below 30 microns). To avoid damage to foliage or fruit discoloration, do not allow Ecobird Bird Repellent to accumulate to the point of runoff. Birds must be exposed to the airborne Ecobird Bird Repellent if it is to achieve lasting results. Direct fog into crop area. Do not apply when crop is wet or if rain is expected. This product may be applied up to the day of harvest. Repeat treatment if significant bird damage begins to occur.

California: Handlers must wear coveralls over normal work clothes. Harvesters must wear gloves and long-sleeved shirts.

New York: This product is not to be used on grapes within Suffolk County.