Eraser Max Super Concentrate Herbicide is a non-selective herbicide that will kill whatever it is sprayed on and should be used outside the drip line of desired trees and shrubs. For weeds within the drip line of trees/shrubs, you can spot treat the weed directly, just ensure that no drift or over spray gets on any desired plantings. Avoid spraying any exposed roots.
Eraser Max Super Concentrate Herbicide will not stain any landscape rocks, driveway, sidewalks or curbs. Please refer to the product label for application insturctions.
Eraser Max Super Concentrate Herbicide is strong enough at the highest rate to kill bamboo but should only be used where you also want to prevent anything from growing as it does also contain a soil sterilant. If you just wish to kill the bamboo and not prevent growth in the area, you can use Round Up QuickPro instead at the highest listed usage rate to help eliminate bamboo. You will be required to cut the bamboo down to a short stump and then apply the Round Up QuickPro. It can take several applications to achieve the desired results.
Eraser Max Super Concentrate Herbicide should be mixed at 6 oz per gallon for spot treating brush, vines and weeds. Yucca is very tough! First you want to cut the plant down as much as possible. Then you can apply a stump remover like Fertilome Brush and Stump killer. It will take 1-6 weeks to kill the root system. You will still have to do your part by removing the stump. Fertilome Brush and Stump Killer will kill the root system and make the stump stop sprouting but it does not make the stump disappear. The exact wording on the product labelis "To kill Stumps and prevent sprouting, apply the undiluted product with a paint brush or backpack sprayer to completely cover the freshly cut surface. Do not reuse paint brush. Wrap in several layers of newspaper and discard in trash."
Yes, Eraser Max Super Concentrate Herbicide is registered now for shipment to CA, so we send that specific product there. Most total vegetation herbicides are either not registered or Restricted Use in California, however Eraser Max is available.
Eraser Max Super Concentrate Herbicide is a non selective herbicide that will kill anything that is sprayed.
Eraser Max Super Concentrate Herbicide is a concentrate that you mix with water as directed on the product label.
We would not advise to use Eraser Max near a well or in a place where there could be runoff. The residual of that product is 6-8 months possibly longer than that. We would not advise to use if there is a place where it accumulates like that.
According to the Eraser Max Super Concentrate Herbicide Product Label: Mixers, loaders, applicators, and other handlers must wear: • Long-sleeve shirt and long pants, • Shoes plus socks, • Chemical resistant gloves for all mixers and loaders, plus applicators using handheld equipment, • Protective eyewear (goggles, face shield, or safety glasses).
Eraser Max Super Concentrate Herbicide is safe for pets if used as directed. You want to keep them out of the treating area until the product has fully dried.
does not state on the label that a surfactant is needed.
It would not be necessary to water additionally after your application of Eraser Max Super Concentrate Herbicide. Since water is the carrier, the amount of water used in the tank mixture for your application should be sufficient for uniform coverage of the target area.
According to the directions on the product label you should mix 7.4 fl. oz. (0.46 pints) of product with water to produce 1 to 10 gallons of spray solution and to uniformly spray the mix over areas where total vegetation control and bareground is desired.
Eraser Max Super Concentrate Herbicide is mixed at 6 oz to a gallon of water for spot treating.
Eraser Max Super Concentrate Herbicide is a great non selective herbicide and you are welcome to try using it to kill a tree. Typically glyphosate products like the Eraser are not going to work quite as well on trees, but the Imazypyr in that product may help with that control since its used as a soil sterilizer. You would need to saturate the bark down and potentially mix in a surfactant or spreader sticker to help it soak into the tree better. If you find this application doesn't yield as great of a result as you hoped, we would recommend either mixing into the tank the Hi Yield Triclopyr or apply the solution undiluted with a paint brush to fresh hacks made into the trunk with a hatchet.
When applied as directed per the product label, Eraser Max Super Concentrate Herbicide should not be harmful to pollinators or bees. Applications should be made when pollinators are least active and there is no wind drift to ensure the application stays in the designated treatment area.
Eraser Max Super Concentrate Herbicide should be mixed at 6 oz per gallon for spot treating brush, vines and weeds. Please refer to the label for complete application instructions.
