Per the Fertilome Weed Free Zone RTS product label instructions are:
How To Apply Using The Ready To Spray System
1. Measure the total (entire) lawn area to be sprayed. For rectangular areas, multiply the length by the width to obtain total square feet.
2. Connect a garden hose to the hose-end sprayer. Make sure the control valve on the nozzle is in the OFF position. TO BEGIN spraying: Turn on water at faucet. Point nozzle toward lawn to be treated and turn the control valve to the ON position. Water will automatically mix with the product. Spray evenly over the measured area.
3. SPRAY: Spray evenly over the measured area. Walk at a steady pace. Refer to the view strip [graduated scale] on the side of the container to guide coverage. The 32 fl.oz. container will treat 16,000 to 43,000 sq.ft. of turfgrass.
4. To STOP spraying: Turn the control valve to the OFF position. Turn off water at faucet. To relieve pressure, turn control valve to ON position and wait until water stops spraying before removing sprayer from hose.
Yes, both the Fertilome Weed Free Zone RTS and Fertilome Weed Free Zone Concentrate contain the same active ingredients and amounts of each. The only difference is one comes with the hose end sprayer attachment top and hte other is for thoes that have their own tank sprayer they prefer to mix it within and use instead. Make sure to follow the label instructions to avoid any turf injury.
When used as directed Fertilome Weed Free Zone RTS is safe for yards with dogs. Dogs need to be kept out of the treated areas until they have dried, typically after 4-6 hours.
You will start to see results in 7 - 14 days after applying Ferti-lome Weed Free Zone. You can reapply in 2 - 6 week intervals. The product should not be applied in temperatures over 90 degrees. It is recommended that you apply products in the early morning or late evening.
We are sorry your both your bottles did not work correctly. We do not see that you purchased the items from our company, and we are not the manufacturer. If you need a refund or replacement bottle for the defective one you purchased, you will need to go back to the company you bought it from, or contact the manufacturer directly. You can reach VPG at 855-270-4776 for technical questions.
