Hi-Yield 38-Plus Insect Control - 38% Permethrin will be diluted with water and the ratio will vary depending on the insect or insects that you are targeting.
Wood Destroying Pests: Use a 0.5% emulsion to spot treat Lawn pests: 0.4 to 0.8 oz. in water (approx. 4 to 25 gallons of water) per 1,000 sq. ft. Ornamental pests: .04 to .08 oz. or .3 to .6 oz, depending on target pest, per gallon of water.
It would be best to wait 24 hours to water your lawn and apply Hi-Yield 38-Plus Insect Control - 38% Permethrin when rain is not expected within 24 hours of application. Once dry it will not be effected too much by rain and can last up to 30 days on outside surfaces.
Hi-Yield 38-Plus Insect Control is meant to be used with a gallon pump sprayer. The mixing ratio is 3.2 fl. oz. (6.5 tablespoons) per two gallons of water. This can be used for localized treatments outdoors only. Please see our Termite Treatment Guide for tips and information about treating for this pest.
Hi-Yield 38-Plus Insect Control - 38% Permethrin is labeled to kill fleas. You should apply <span new="" roman;="" font-size:medium"="">0.4 to 0.8 oz. Hi-Yield 38-Plus Insect Control - 38% Permethrin per 1,000 square feet outdoors. We would also recommend using an Insect Growth Regulator such as Archer with Hi-Yield 38-Plus. Please see our Flea Pest Guide for more information about flea control.
Hi-Yield 38-Plus Insect Control - 38% Permethrin is mixed at the rate of 0.04 to 0.08 fl. ozs. (1/8 to 1/4 tsp.) (1 to 2 ml.) per gallon per the product label. For bagworms it needs to be applied when the larvae are young and before they form the bag.
We would recommend that you apply Hi-Yield 38-Plus Insect Control at least 24 hours before you are expecting any rain.
Yes, Hi-Yield 38-Plus Insect Control - 38% Permethrin can be used with a hose-end sprayer. Please consult the product label for mix rates and application instructions for the pest you are treating.
Per the product label on the Hi-Yield 38-Plus Insect Control - 38% Permethrin you mix 0.4 - 0.8 fl (2.5 - 5 tsps) of this product in suffienct volume of water to cover 1000 sq. ft (approximately 4 to 25 gallons of water). Spray evenly over the lawn when insects first appear. Repeat applications as necessary, but not more frequently than every 10-14 days. Do not apply more than 1.6 fl oz/1000 sq ft per year.
Per the product label on the Hi-Yield 38-Plus Insect Control - 38% Permethrin you mix 0.4 - 0.8 fl (2.5 - 5 tsps) of this product in suffienct volume of water to cover 1000 sq. ft (approximately 4 to 25 gallons of water). Spray evenly over the lawn when insects first appear. Repeat applications as necessary, but not more frequently than every 10-14 days. Do not apply more than 1.6 fl oz/1000 sq ft per year.
No The Hi-Yield 38-Plus Insect Control - 38% Permethrin is not labeled to use for bed bugs. It is ONLY for Outdoor Residential use: outdoor areas, ornamentals, lawns, trees, shrubs, vines, perimeter treatments, ornamental foliage, ornamental flowering plants, conifers, woody non-edible ornamentals, herbaceous non-edible ornamentals. Please take a few moments to look through our Bed Bug Guides to better assist you in what products to purchase. We strongly recommend that you use a variety of methods and products to insure bed bugs are eliminated from infested areas. Using only one product or method will usually NOT be enough to completely eliminate a bed bug infestation as bed bugs can become resistant to products and it is also possible for them to avoid areas that have been treated with certain products.
The shelf life of Hi-Yield 38-Plus Insect Control - 38% Permethrin will be at least 3 to 5 years as long as you store it in a cool place out of direct sunlight.
Hi-Yield 38-Plus Insect Control - 38% Permethrin although, it may kill gnats that contact it, it is not labeled for gnats. We would recommend Talstar P which is labeled to treat for Gnats mixing at 1oz per gallon water.