The Permethrin 10% cannot be applied using a propane fogger. We are not familiar with the Burgess model, but we do carry the Bonide Propane Fogger which is in stock and looks very similar. You could use Bonide Mosquito Beater Flying Insect Fog in a thermal fogger for these pests.
Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide is not specifically labeled for applications to okra. The harvest intervals are listed on the chart on the product label for vegetables/fruit on pages 13-18. You can use Triple Action on vegetables like okra up to the day of harvest.
You can use Hi-Yield 10% Permethrin Insecticide to treat armyworms, however you would use a lot of this product to treat 70,000 square feet. The directions for armyworm treatment with this product are on pages 11-12 of the label here. One of our most popular products used to treat armyworms is Talstar P. You would use up to 1 oz per 1,000 square feet to treat for turf pests.
Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide is labeled to be used on some edible vegetables but does not list peas. It will not prevent the peas from blooming but we would recommend not eating anything from the sprayed plants for 1 season.
Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide should be applied with a pump sprayer.
You should use diluted solution of Hi-Yield Indoor/Outdoor 10% Permethrin and most other insecticides within 24 hours of mixing. We recommend only diluting the concentrate that you plan to use immediately for best results.
Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide can be applied indoors at a rate of 3.67 oz (22 tsp.) per gallon of water or 6.7 oz. for severe infestations. Please see the product label for complete application instructions. Please also take a look at our Roach Control Guide for more tips on treating and preventing this pest.
Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide is not labeled to be applied to Marijuana for Spider mites. We can only recommend Horticultural oils like Ultra Pure Horticultural Oil.
Per the product label for Hi-Yield Indoor/Outdoor Broad Use Insecticide with 10% Permethrin Insecticide: For initial clean up of severe Insect infestation, dilute at a rate of 6.7 fluid ounces of this product to 1 gallon water of used (1/2% solution). For normal infestations dilute 1 1/3 fluid ounces of this product to1 gallon of water used (0.1%). We would recommend also reading our guide here on how to effectively treat for bed bugs.
Hi-Yield 10% Indoor/Outdoor Permethrin is labeled to control bedbugs. Per the product label: “Spray mattresses lightly, particularly around tufts and seams. Take beds apart and spray in all joints. Treat baseboards, moldings and floors. Repeat treatment as needed but not more often than once every 2 weeks. Allow all treated articles to thoroughly dry before use. After the mattress is dry, cover with mattress cover and sheet. Do not use mattress without cover.” Please review our very informative article on How to Get Rid of Bed Bugs for more information about complete, thorough applications for bed bugs.