Kind LED X Series XD75 Vegetative Bar Light

Kind LED X Series XD75 Vegetative Bar Light
Kind LED X Series XD75 Vegetative Bar Light
Kind LED X Series XD75 Vegetative Bar Light

Ask A Pro

Call Us: 866-581-7378
Mon-Fri 9am-5pm ET
Email Customer Service
For help with your order
Live Chat
DIY Pros Available Now

You May Also Need

Temprid FX 8 mL
$9.98

Average Rating

There are no reviews for this product yet. Be the first.

Product Overview

Kind LED XD75 Vegetative Bar Light offers a game-changing standard in grow lighting to let you maximize under canopy growth, quality and higher yields. This intracanopy, dual-sided vegetative spectrum bar light are biased on blue end and it is particularly designed for leafy greens, vegetables, and plants that need to be in the vegetative form before transitioning to flowering stage. Its advanced spectrum offers optimal photon emissions that are essential for vegetative growth. The integrated photosynthetic photon flux density (PPFD) distributes excellent concentration and amount of photon energy from the canopy surface to the plant's base. It features an IP65 rating (Ingress Protection Rating) which provides safety and protection against the harsh conditions of commercial greenhouses. The IP65 rating that the lights are dust-tight and can manage a 6.3mm water nozzle spray from all directions without damaging effects. It is also ETL listed so it is compliant to North American safety standards. This double-sided bar light is 75-watts. Total weight of 7.5 lbs

Product Documents

Features and Specs

For use in: Leafy greens, vegetables, and plants.
Pet safe: Yes, if used as directed on the label.
Dimensions: 47.4 in. L x 3.1 in. W x 2.3 in. H.
UV Power: 75w.
Voltage: 100-277V AC.
Special Features: The most versatile LED bar light on the market. Double-sided.
Warranty: 3 years.
Shipping Weight: 7.50 lbs
Manufacturer: Kind LED Grow Lights (Mfg. Number: XD75VEG)
UPC: 858188007119

Details

SPECIFICATIONS:

  • Spectrum - Vegetative
  • Diodes - 432 (216 per side)
  • Max Wattage - 75w
  • Input Voltage - 100-277V AC
  • Amperage - 0.625A @ 120V / 0.313A @ 240V
  • Lifetime - >50,000 Hours
  • Weight - 7.5 lbs.
  • Dimensions - 47.4 in. L x 3.1 in. W x 2.3 in. H
  • Cord Length - 6 ft.
  • RMH - +/-9 in.
  • PPFD Peak (RMH) Vegetative - 110
  • Warranty - 3-Year
  • Certifications - CE, ETL, FCC, ROHS, IP65

SET UP GUIDE:

HANGING YOUR LIGHT:

To hang the X Series Bar Light:

  1. Locate the two sliding Hanging Mounts on the light fixture.
  2. Attach one Hanging Cord, via the Carabiner, to each of the Hanging Mounts.
  3. Attach opposite ends of your Hanging Cords to your desired location.

GETTING STARTED:

Once you have properly installed your Kind LED X Series Bar Light, carefully remove the protective film from the lens. You can now plug in your fixture. Alignment of internal notches will ensure proper connection of cord ends. Once ends are fully seated, seure with threaded water tight sleeve.

ADJUSTING THE HANGING MOUNT LOCATION:

X Series Bar Lights offer the ability to adjust the hanging mount location on the light fixture to maximize versatility.

For side mount or stacked light configurations:

  1. Locate the Endcap opposite of the Power Ballast.
  2. Carefully remove the Endcap using a screwdriver , then remove the protective silicone seal (do not discard).
  3. Slide to remove the Hanging Mounts from the current channel. Slide the Hanging Mounts into the new desired channel.
  4. Reattach the silicone seal and Endcap to ensure a snug fit.

FLUSH MOUNTING THE X SERIES BAR LIGHTS:

X Series Bar Lights offer the ability to mount the fixture flush to a surface.

For flush mount configurations:

  1. Locate the Endcap opposite of the Power Ballast.
  2. Carefully remove the Endcap using a screwdriver, then remove the protective silicone seal (do not discard).
  3. Remove the Hanging Mounts from the top channel of the fixture.
  4. Slide two Flush Mount Bracket into each of the side channels of the fixture.
  5. Reattach the silicone seal and Endcap to ensure a snug fit.

ATTACHING TWO OR MORE LIGHTS VIA END CAP CONNECTION HARDWARE:

X Series Bar Lights offer mounting points for linear connection of multiple lights.

For light to light linear Endcap mounting:

  1. Place two lights, end to end, aligning the Endcap mounting holes.
  2. Use the Endcap Connection Hardware to connect the two lights. Tighten to ensure a snug fit.

DAISY CHAIN SET UP:

If daisy chaining multiple light together, please connect the female connector of the power cord to the male connector on the split end of the daisy chain cord. The female connector on the split end of the daisy chain cord will then attach to the driver that will be first in the series of daisy chained lights. The opposite end of the daisy chain cord will then extend to the next light in the series and this process will repeat itself with the female end of the cord attaching to the male end of the next daisy chain cord.

Note: The last light in the series will simply have the female connector at the end of the daisy chain cord plugged into the male connector directly attached to the driver.

BAR LIGHT CARE:

Your new Kind LED X Series Bar Light is equipped with an IP65 Rating which ensures that your light fixture is dust tight and impervious to spraying water. If, when adjusting the mounting locations, you have removed the Endcap and Silicone Seal, please take care to make sure the Endcap and Silicone Seal are securely fastened and seated to the fixture once reattached.

For consistent high performance from your X Series Bar Light, please keep the lens cover clean of dust, and water residue.

There are no reviews for this product yet. Be the first.

Questions & Answers

Have a question about this product?

There are no questions for this product yet. Ask the first.