Mixed Martins Permethrin 10% solution can be disposed of by pouring it out right up against the foundation of your home or other structure.
Martins Permethrin 10% is to be mixed at 1 1/2 oz. in 1 quart of water for treating 400 linear feet with a 6-inch spray band. For other applications rates you can refer to the product label.
Martins Permethrin 10% should mix clear with water.
Martins Permethrin 10% is effective once it's mixed with water, remember that water is the carrier that allows the product to be applied evenly. Just as with other insecticides, the product must be used within 24 hours of being diluted otherwise the effectiveness does decrease. According to the label, to create a .10% solution, you will need to mix 1.33 ounces per gallon of water or for a pint of solution that will equal about 0.16 oz per 16 oz of water. According to the label though, if you're doing a dog dip you will need to use at least 8 ounces in 12.5 gallons of water, please read over the label for more information and treatment dilutions. Also, we do recommend to see your pets veterinerian for treatment.
Martins Permethrin 10% is labeled to control grubs as directed on page 4 of the product label. Thoroughly wet down grass a few hours before applying. Home lawns should be no taller than 3 inches at time of application. Slightly more water may be used as long as the amount of product per area is as listed below. For heavy infestations, repeat application after 2 weeks. For grubs, use 1 1/2 fl. ozs. in 10 gals. of water to cover 1,000 sq. ft.
You may find our article on grub control helpful. Generally a systemic like Adonis 2F is a more recommended option for treatment.
Martins Permethrin 10% can be applied every 3 weeks as needed.
Martins Permethrin 10% is not labeled to be used for head lice nor can it be used on the human body in any way or form. You should consult with a pharmacist or medical doctor for lice shampoo.
Yes, The Martins Permethrin 10% may be used indoors and outdoors for flea control, but you may need additional products with it. We also suggest you look at our Indoor/Outdoor Flea Kit for a continuous treatment.This kit contains both adulticides and Insect Growth Regulators (IGRs) to provide quick knockdown of adult pests and to prevent the development of immature stages of ticks and fleas. The indoor products, NyGuard Plus and CimeXa dust, are ready to use, while the Temprid SC and Archer IGR are concentrates that will be diluted with water and applied with a pump sprayer.
Martins Permethrin 10% is water-based.
Martins Permethrin 10% should not be applied to clothing as it is not labeled for this application.
Martin's Permethrin 10% cannot be applied to anything edible. You may be able to use something like Hi-Yield Indoor/Outdoor 10% Permethrin instead. Please consult the product label to make sure that the insect(s) you are targeting and the specific edibles you will be applying to are listed. You can see our full selection of products for edibles here.
Yes, you can apply Martins Permethrin 10% to the lawn. Thoroughly wet down grass a few hours before applying. Home lawns should be no taller than 3 inches at time of application. Slightly more water may be used as long as the amount of product per area is as listed below. For heavy infestations, repeat application after 2 weeks. For ants, crickets and grasshoppers, use 1/2 fl. oz. in 3 gals. of water to cover 1,000 sq. ft. For other listed insects, use 1 1/2 fl. oz. in 10 gals. of water to cover 1,000 sq. ft.
Martins Permethrin 10% is not labeled to be painted onto tree trunks. You can dilute this product at a rate of 6 oz per gallon of water with a hand-pump or backpack sprayer and then spray around the perimeter of your home to control elm seed bugs. This article from your Colorado Extension has great information about this pest and its life cycle. They suggest treating around your home for the best defense against this pest since the trees will already have populations too established for you to control with insecticides.
Martins Permethrin 10% is not labeled to be applied to indoor plants. You could use Talstar for indoor plants. Mix at .5oz per gallon water.
Martins Permethrin 10% is not labeled for usage on mattresses or bedding in any way. This is not a legal or a safe application and the product should not be applied to any other surface other than what is listed on the product label.
When using Martins Permethrin 10% can be used on dogs at the following usage rate: Dilute 8 ozs in 12.5 gallons of water; Thoroughly wet the animal by dipping, sponging, or spraying. Allow animal to dry in a warn place without rinsing or toweling. Do Not reapply product for two or three weeks. Consult a veterinarian before using this product on debilitaed, aged, pregnant, or nursing animals on medication.
Martins Permethrin 10% cannot be reapplied in 2-3 weeks.
