Martins Permethrin 10% cannot be reapplied in 2-3 weeks.
When using Martins Permethrin 10% can be used on dogs at the following usage rate: Dilute 8 ozs in 12.5 gallons of water; Thoroughly wet the animal by dipping, sponging, or spraying. Allow animal to dry in a warn place without rinsing or toweling. Do Not reapply product for two or three weeks. Consult a veterinarian before using this product on debilitaed, aged, pregnant, or nursing animals on medication.
Martins Permethrin 10% is not labeled for usage on mattresses or bedding in any way. This is not a legal or a safe application and the product should not be applied to any other surface other than what is listed on the product label.
Yes, Martins Permethrin 10% is labeled to treat for chich bugs. Per the product label you would thoroughly wet down grassa few hours before applying. Home lawns should be no taller than 3 inches at time of application. Slightly more water may be used as long as the amount of product per area is as listed below. For heavy infestations, repeat application after 2 weeks. You would use 1.5 fl ozs in 10 gallons of water to cover 1000 sq ft.
Martins Permethrin 10% does not have a strong odor. According to the SDS sheet, there is only a slight characteristic odor.
People and pets need to be kept out of the area while Martins Permethrin 10% is being applied and until it has dried. Once it has dried, it is safe for everyone to return to the area.
Per the product label, you will dilute 2 ozs. of Martins Permethrin 10% in 1 gal. water to treat pests on large animals. Please see the label for specific application rates and instructions.
Yes, Martins Permethrin 10% is labeled for use indoors and outdoors as directed on the product label for your target pest.
Martins Permethrin 10% can be applied to dogs. Per the product label:
Dilute 8 ozs. in 12.5 gals. of water. Thoroughly wet the animal by dipping, sponging or spraying.Allow animal to dry in a warm place without rinsing or toweling Do not reapply product for two to three weeks. Consult a veterinarian before using this product on debilitated, aged, pregnant or nursing animals on medication.
Although Martins Permethrin 10% is a livestock and premise spray, it should not be applied to grazing areas.
Martins Permethrin 10% is not labeled to treat either scabies or bed bugs. Scabies mites live only on/in the skin and we do not carry anything to treat humans. Most folks need to visit their doctor to receive the medication needed to get rid of scabies. You may spray your furniture with a product such as Steri-fab to kill anything on furniture though treating the home for scabies is usually not necessary. If you need to treat for bed bugs we would recommend using one of our bed bug kits to ensure that you have all of the products necessary for a thorough treatment. Before beginning any treatment, we would recommend that you get a proper identification of the pest you are dealing with, if you have not already done so, so that you can be sure you are using the right product(s) for your needs. You can do this by contacting either a pest control company or the local cooperative extension office in your area.
Per the Martins Permethrin 10% product label: Use 1 1/2 fl. oz. in 1 quart of water, treating 400 linear feet with a 6-inch spray band.
We would recommend contacting your vet to appropriately diagnose what the issue is on the piglets before applying anything such as Martins Permethrin 10%. The product is labeled for applying to swine when used as directed but you should be sure that you are treating correctly for the exact issue.
The inert ingredients in products like Martins Permethrin 10% are proprietary to the manufacturer and are not required by law to be listed on the product label. Only active ingredients will be listed. Please let us know if we can further assist you.
You should not store mixed Martins Permethrin 10% or any other insecticide concentrate for longer that 24 hours in a sprayer. Concentrated insecticides will begin to separate which will clog the lines as well as destroy the seals in the sprayer. We recommend mixing a gallon at a time and discarding left over solution.
Martins Permethrin 10% is safe to apply to adult livestock per the product label instructions. "For a pig, you would mix 8 oz to 25 gallons of water and apply a pint per pig (sponged on avoiding ears) for listed insect control". Thoroughly wet the animal by dipping, sponging or spraying.Allow animal to dry in a warm place without rinsing or toweling Do not reapply product for two to three weeks. Consult a veterinarian before using this product on debilitated, aged, pregnant or nursing animals. Please contact Control Solutions for further assistance on a feral piglet at 281-892-2500.
Martins Permethrin 10% can be diluted with water only, not with oil, per the product label. Please let us know what pest you are targeting, where you are treating, and what kind of equipment you are using so that we can recommend an alternative product, if needed.
Martins Permethrin 10% can be applied once every 30 days inside.