Martins Permethrin 10% does not contain petroleum. It cannot be used on clothes.
Martins Permethrin 10% can be diluted with water only, not with oil, per the product label. Please let us know what pest you are targeting, where you are treating, and what kind of equipment you are using so that we can recommend an alternative product, if needed.
Yes! Martins Permethrin 10% would be mixed with water only and applied at the following rates and instructions on cattle:
Dilute 8 ozs. in 50 gals. water
Dilute 1 pt in 100 gals. water
Dilute 1 qt. in 200 gals. water
Dilute 2 ozs. in 1 gal. water
Dilute 1 pt. in 8 gals. water
Spray to thoroughly cover entire animal. For lice or mites, a second treatment is recommended 14-21 days later. Spray lactating dairy cows only after milking is completed. SPOT TREATMENT - LOW-PRESSURE SPRAY Apply 1/2 oz. per ear or 2-4 oz. on the face or 12-16 oz. along the backline.
Per the product label: Dilute 8 ozs. in 12.5 gals. of water. This would breakdown to a vary small amount per gallon (0.005 oz/gal) and even smaller for a quart sprayer so would not be recommended.
Thoroughly wet the animal by dipping, sponging or spraying. Allow animal to dry in a warm place without rinsing or toweling. Do not reapply product for two to three weeks. Consult a veterinarian before using this product on debilitated, aged, pregnant or nursing animals on medication.
Martins Permethrin 10% is safe to apply to adult livestock per the product label instructions. "For a pig, you would mix 8 oz to 25 gallons of water and apply a pint per pig (sponged on avoiding ears) for listed insect control". Thoroughly wet the animal by dipping, sponging or spraying.Allow animal to dry in a warm place without rinsing or toweling Do not reapply product for two to three weeks. Consult a veterinarian before using this product on debilitated, aged, pregnant or nursing animals. Please contact Control Solutions for further assistance on a feral piglet at 281-892-2500.
Per the product label, thoroughly wet down grass a few hours prior to applying Martins Permethrin 10%. Home lawns should be not more than 3 inches tall at the time of application. For ticks, use 1.5 oz in 10 gallons of water to cover 1,000 sq ft. For heavy infestations repeat application in 2 weeks.
You would need to reapply Martins Permethrin 10% after bathing your dog. Per the product Label , Martins Permethrin 10% can be applied every 3 weeks as needed.Discontinue use and wash your pet with mild soap and plenty of water if your pet shows any signs of sensitivity to this product.
Martin's Permethrin 10% is not labeled to be applied to edible gardens. The Captain Jacks Deadbug Brew states that for potato bugs you can reapply every 7 days as needed or until the bugs are gone.
Per the Martins Permethrin 10% product label: Use 1 1/2 fl. oz. in 1 quart of water, treating 400 linear feet with a 6-inch spray band.
Martins Permethrin 10% is safe to apply to adult livestock per the product label instructions. "For a pig, you would mix 8 oz to 25 gallons of water and apply a pint per pig (sponged on avoiding ears) for listed insect control". Please contact Control Solutions for further assistance on a feral piglet at 281-892-2500.
Martins Permethrin 10% should NOT be applied to your skin for the treatment of scabies. We do not carry a product that can be safely applied to humans for eradicating scabies. Please see a physician that can prescribe a product that is safe for this type of treatment.
Martins Permethrin 10% will likely last up to about 30 days in optimum conditions. If you would like a longer lasting insecticide, we would recommend an encapsulated product such as Cyzmic CS. In a crawl space, you could also use an insecticide dust such as Delta Dust, which is a dry formulation that lasts about six months.
Martins Permethrin 10% can be applied once every 30 days inside.
Martins Permethrin 10% is toxic to bees if they land on the treated area while wet or after it has dried. You should not apply this product in areas where bees or other pollinators are actively foraging.
Martins Permethrin 10% should not be applied to cats. This product is extremely toxic to them. For dogs, Martins Permethrin 10% can be reapplied every 2-3 weeks. It is recommended that you wet the ground before applying the product to increase the effectiveness.
The Martins Permethrin 10% label states that you cannot ship swine for slaughter within 5 days of the last treatment. You should contact the manufacturer at 281-892-2500 for further information.
Martins Permethrin 10% will not harm cats if they are kept out of the treated area during application and until everything is thoroughly dry. Please refer to the product label for complete application instructions.
Martins Permethrin 10% can be used around windows, doors, and around the perimeter of your home indoors and outdoors. We would not recommend spraying the product directly on the screen.