Per the product label, thoroughly wet down grass a few hours prior to applying Martins Permethrin 10%. Home lawns should be not more than 3 inches tall at the time of application. For ticks, use 1.5 oz in 10 gallons of water to cover 1,000 sq ft. For heavy infestations repeat application in 2 weeks.
Martins Permethrin 10% is safe to apply to adult livestock per the product label instructions. "For a pig, you would mix 8 oz to 25 gallons of water and apply a pint per pig (sponged on avoiding ears) for listed insect control". Please contact Control Solutions for further assistance on a feral piglet at 281-892-2500.
Martins Permethrin 10% will likely last up to about 30 days in optimum conditions. If you would like a longer lasting insecticide, we would recommend an encapsulated product such as Cyzmic CS. In a crawl space, you could also use an insecticide dust such as Delta Dust, which is a dry formulation that lasts about six months.
Martins Permethrin 10% may kill termites that come in contact with it, but will not completely take care of the termite problem. Please see our Termite control page. for information on how to appropriately treat an active termite infestation and the best products to do it.
Martins Permethrin 10% is safe to apply to adult livestock per the product label instructions. "For a pig, you would mix 8 oz to 25 gallons of water and apply a pint per pig (sponged on avoiding ears) for listed insect control". Thoroughly wet the animal by dipping, sponging or spraying.Allow animal to dry in a warm place without rinsing or toweling Do not reapply product for two to three weeks. Consult a veterinarian before using this product on debilitated, aged, pregnant or nursing animals. Please contact Control Solutions for further assistance on a feral piglet at 281-892-2500.
Martins Permethrin 10% can be applied once every 30 days inside.
Martins Permethrin 10% should NOT be applied to your skin for the treatment of scabies. We do not carry a product that can be safely applied to humans for eradicating scabies. Please see a physician that can prescribe a product that is safe for this type of treatment.
Yes! Martins Permethrin 10% would be mixed with water only and applied at the following rates and instructions on cattle:
Dilute 8 ozs. in 50 gals. water
Dilute 1 pt in 100 gals. water
Dilute 1 qt. in 200 gals. water
Dilute 2 ozs. in 1 gal. water
Dilute 1 pt. in 8 gals. water
Spray to thoroughly cover entire animal. For lice or mites, a second treatment is recommended 14-21 days later. Spray lactating dairy cows only after milking is completed. SPOT TREATMENT - LOW-PRESSURE SPRAY Apply 1/2 oz. per ear or 2-4 oz. on the face or 12-16 oz. along the backline.
Martins Permethrin 10% should not be applied to cats. This product is extremely toxic to them. For dogs, Martins Permethrin 10% can be reapplied every 2-3 weeks. It is recommended that you wet the ground before applying the product to increase the effectiveness.
Martins Permethrin 10% will not harm cats if they are kept out of the treated area during application and until everything is thoroughly dry. Please refer to the product label for complete application instructions.
Martins Permethrin 10% does not contain petroleum. It cannot be used on clothes.
We apologize but we are not familar with tick tubes and whether or not Martins Permethrin 10% would work for your uses. You can contact the manufacturer Control Solutions to see if they can better assist you at (281) 892-2500.
The Martins Permethrin 10% label states that you cannot ship swine for slaughter within 5 days of the last treatment. You should contact the manufacturer at 281-892-2500 for further information.
Martins Permethrin 10% can be used around windows, doors, and around the perimeter of your home indoors and outdoors. We would not recommend spraying the product directly on the screen.
Yes, Martins Permethrin 10% is labeled to treat for chich bugs. Per the product label you would thoroughly wet down grassa few hours before applying. Home lawns should be no taller than 3 inches at time of application. Slightly more water may be used as long as the amount of product per area is as listed below. For heavy infestations, repeat application after 2 weeks. You would use 1.5 fl ozs in 10 gallons of water to cover 1000 sq ft.
When using Martins Permethrin 10% for treating cattle you will need to dulite 8 ounces of the product in 50 gallons of water and apply to cattle by spraying them with the mixed solution thouroughly covering the entire animal. A second treatment can be made after 14-21 days from the first application. Also refer to the product labeling before making any application.
Martins Permethrin 10% may be used to treat dogs over 12 weeks of age for fleas, ticks, mange, and lice (do NOT apply permethrin products on cats). Per the product label, you should mix 8 oz. in 12.5 gallons of water, which would break down to 0.64 ounces per 1 gallon of water.
"Thoroughly wet the animal by dipping, sponging or spraying. Allow animal to dry in a warm place without rinsing or toweling. Do not reapply product for two to three weeks. Consult a veterinarian before using this product on debilitated, aged, pregnant or nursing animals on medication."
Please let us know the targeted pest and area of application for an appropriate dilution rate. The product should only be applied in a gallon size minimum. We will be happy to help you select the dilution for you that will best fit your needs. Thank you!
