Per the Martins Permethrin 10% product label: Use 1 1/2 fl. oz. in 1 quart of water, treating 400 linear feet with a 6-inch spray band.
Martin's Permethrin 10% is not labeled to be applied to edible gardens. The Captain Jacks Deadbug Brew states that for potato bugs you can reapply every 7 days as needed or until the bugs are gone.
You would need to reapply Martins Permethrin 10% after bathing your dog. Per the product Label , Martins Permethrin 10% can be applied every 3 weeks as needed.Discontinue use and wash your pet with mild soap and plenty of water if your pet shows any signs of sensitivity to this product.
Martins Permethrin 10% can be applied once every 30 days inside.
Per the product label, thoroughly wet down grass a few hours prior to applying Martins Permethrin 10%. Home lawns should be not more than 3 inches tall at the time of application. For ticks, use 1.5 oz in 10 gallons of water to cover 1,000 sq ft. For heavy infestations repeat application in 2 weeks.
Martins Permethrin 10% is safe to apply to adult livestock per the product label instructions. "For a pig, you would mix 8 oz to 25 gallons of water and apply a pint per pig (sponged on avoiding ears) for listed insect control". Thoroughly wet the animal by dipping, sponging or spraying.Allow animal to dry in a warm place without rinsing or toweling Do not reapply product for two to three weeks. Consult a veterinarian before using this product on debilitated, aged, pregnant or nursing animals. Please contact Control Solutions for further assistance on a feral piglet at 281-892-2500.
Per the product label: Dilute 8 ozs. in 12.5 gals. of water. This would breakdown to a vary small amount per gallon (0.005 oz/gal) and even smaller for a quart sprayer so would not be recommended.
Thoroughly wet the animal by dipping, sponging or spraying. Allow animal to dry in a warm place without rinsing or toweling. Do not reapply product for two to three weeks. Consult a veterinarian before using this product on debilitated, aged, pregnant or nursing animals on medication.
Martins Permethrin 10% is toxic to bees if they land on the treated area while wet or after it has dried. You should not apply this product in areas where bees or other pollinators are actively foraging.
Yes! Martins Permethrin 10% would be mixed with water only and applied at the following rates and instructions on cattle:
Dilute 8 ozs. in 50 gals. water
Dilute 1 pt in 100 gals. water
Dilute 1 qt. in 200 gals. water
Dilute 2 ozs. in 1 gal. water
Dilute 1 pt. in 8 gals. water
Spray to thoroughly cover entire animal. For lice or mites, a second treatment is recommended 14-21 days later. Spray lactating dairy cows only after milking is completed. SPOT TREATMENT - LOW-PRESSURE SPRAY Apply 1/2 oz. per ear or 2-4 oz. on the face or 12-16 oz. along the backline.
Martins Permethrin 10% can be diluted with water only, not with oil, per the product label. Please let us know what pest you are targeting, where you are treating, and what kind of equipment you are using so that we can recommend an alternative product, if needed.
Please let us know the targeted pest and area of application for an appropriate dilution rate. The product should only be applied in a gallon size minimum. We will be happy to help you select the dilution for you that will best fit your needs. Thank you!
When using Martins Permethrin 10% for treating cattle you will need to dulite 8 ounces of the product in 50 gallons of water and apply to cattle by spraying them with the mixed solution thouroughly covering the entire animal. A second treatment can be made after 14-21 days from the first application. Also refer to the product labeling before making any application.
Martins Permethrin 10% will not harm cats if they are kept out of the treated area during application and until everything is thoroughly dry. Please refer to the product label for complete application instructions.
Martins Permethrin 10% may kill termites that come in contact with it, but will not completely take care of the termite problem. Please see our Termite control page. for information on how to appropriately treat an active termite infestation and the best products to do it.
Martins Permethrin 10% would be mixed with water only and applied at the following rates and instructions on cattle:
Dilute 8 ozs. in 50 gals. water
Dilute 1 pt in 100 gals. water
Dilute 1 qt. in 200 gals. water
Dilute 2 ozs. in 1 gal. water
Dilute 1 pt. in 8 gals. water
Spray to thoroughly cover entire animal. For lice or mites a second treatment is recommended 14-21 days later. Spray lactating dairy cows only after milking is completed. SPOT TREATMENT - LOW PRESSURE SPRAY Apply 1/2 oz. per ear or 2-4 oz. on face or 12-16 oz. along the backline.
The manufacturer recommends that you do not apply Martins Permethrin 10% to pigs until they are 12 weeks old at the following rates:
Dilute 8 ozs. in 25 gals. of water
Dilute 1 pt. in 50 gals. of water
Dilute 1 qt. in 100 gals. of water
Spray, dip or sponge to apply 1 pint per pig, especially around ears. Please refer to the product Label for complete application instructions.
The Martins Permethrin 10% label states that you cannot ship swine for slaughter within 5 days of the last treatment. You should contact the manufacturer at 281-892-2500 for further information.
Martins Permethrin 10% does not contain petroleum. It cannot be used on clothes.
We apologize but we are not familar with tick tubes and whether or not Martins Permethrin 10% would work for your uses. You can contact the manufacturer Control Solutions to see if they can better assist you at (281) 892-2500.