Monterey Consan 20 cannot be used on any edibles or food for human consumption.
The manufacturer does not recommend that you use the Monterey Consan 20 on sheetrock. Sheetrock retains a lot of moisture, so the better solution would be to remove the sheetrock and insulation, treat the wood studs in the wall with Bora-Care with MoldCare, and then replace the insulation and sheetrock. Please look at the regular Bora Care with Mold Care which will kill and prevent future mold growth on a variety of surfaces including wood, cellulosic drywall (sheetrock), and concrete. You may paint surfaces after you have treated with Bora Care with Mold Care and allowed it to fully dry which should take about 72 hours.
Monterey Consan 20 can be used as a disinfectant. Please refer to page 3 of the product label for instructions for the area(s) you need to treat.
We are not sure where you can purchase this product locally. We do carry it and we offer fast, free shipping right to your door.
Monterey Consan 20 is not labeled to for use on plastic.
Monterey Consan 20 cannot be used on any edibles or food for human consumption. Simple Success Companion Biological Fungicide would be a better option
We apologize but we do not know any locations in Texas where the Monterey Consan 20 can be purchased. We carry this product and offer free shipping. It takes 3 to 6 business days to arrive and you may place your order with us by contacting our office at 866-581-7378.
We recommend that you consult with a local vet regarding parvovirus. Monterey Consan 20 is not labeled for this disease.
No Monterey Consan 20 would not be used in an attic. Nisus DSV can be used in attics and almost any area to clean up rodent or any other pest droppings and will not harm insulation, wood or other materials within the attic or treatment areas. If possible though it would be best to replace the insulation.
Monterey Consan 20 will control mold, mildew, etc. on pourous surfaces after flooding.
A better option would be to use Boracare with Moldcare. This will kill existing mold and mildew, however, it will not take care of the stains. Mold Clean is recommended for that. The rate of Boracare with Moldcare is 5:1. This can be applied to raw wood only. This will kill and prevent mold/mildew for the life of the wood once applied.
Monterey Consan 20 is restricted to indoor uses or uses in which controlled conditions prevent runoff and exposure to the environment. It should not be used to treat the walls for mold. The water leakage should be addressed to prevent the moisture to the walls in the future.
While the Monterey Consan 20 is a great product for killing algae and moss growing on hard surfaces, for your purposes of needing cleaning and disinfectant, we would recommend going with Nisus DSV instead. This is a truly great sanitizing disinfectant and virucide and will kill any bad spores trying to thrive in those areas. Once the DSV has dried you can proceed with any other steps you need to treat the wood with. If you choose to go with the Consan still, you should be able to give it until dry and at most a full day before applying your next step.
The shelf life of Monterey Consan 20 is normally 3-5 years if stored properly in a temperature stable environment (above 45 and below 90) and out of direct sunlight.
No, Consan is not labeled for use in washing machines or any other appliances.
