Monterey Mole Repellent RTS

APPLICATION DIRECTIONS

Apply when tunnels appear in the area to be treated. To determine if the tunnels are active, flatten an area of the tunnel. If the tunnel is repaired within 1 – 2 days, the tunnels are active.

If the soil is dry, water thoroughly before application.

Rate: Apply at the rate of 2 fl. oz. in 2 gallons of water per 1,000 sq. ft. Shake bottle well and add the desired amount of MOLE REPELLENT to the water in the sprayer. Shake to mix well.

Thoroughly cover the entire area to be treated. Once applied, water the treated area thoroughly to move MOLE REPELLENT into the soil. Repeat when mole activity is noticed.

Hose-End Sprayer Directions:

Shake Container Well Before Getting Started.

1. Before you start, the blue top water flow valve should be in the “OFF” position, and the red product flow valve should be in the up, “OFF” position.
2. Shake container well and attach it to your garden hose.
3. Turn on the water from the faucet.
4. To apply, remove side pin (labeled “PULL OUT”) and rotate red product flow valve to “ON”; then while holding sprayer at waist level and pointing in a direction away from face and body, push blue water flow valve forward to activate water.
5. When you are finished spraying or if you have to stop spraying at any time, press blue water flow valve with thumb to the rear to shut off water and return side red valve to the upright “OFF” position and replace side pin.
6. Turn off the water at the faucet.
7. Remove the container from the garden hose; then rinse thoroughly and store according to storage instructions.