The Pendulum AquaCap reduces staining potential but there is still the potential for Pendulum AquaCap to stain porous surfaces such as stone and wood. The Pendulum AquaCap label states that you should avoid unintentional contact of spray solution to driveways, stone, wood, and other porous surfaces and recommends that you rinse surfaces IMMEDIATELY using a heavy spray of water to avoid staining.
The drying time after applying Pendulum AquaCap Herbicide 2.5 Gallon is around 4 hours, but this can vary due to many factors including weather temperature, humidity, and volume applied.
When stored properly out of direct sunlight and out of extreme temperatures Pendulum AquaCap- 2.5 Gallon can be stored for up to 3 years.
The first thing you need to know when using an herbicide such as Pendulum? is that the exact amount of water you dilute it with is not important. It is only important to make sure you are using the correct amount of product per 1,000 sq ft of lawn. Use too much and you risk damaging your lawn, use too little and you will not get adequate results. You will need to use 1.3 - 1.8 oz of Pendulum per 1,000 sq ft of lawn. To decide how much water you want to use, you should mark a 1,000 sq ft area, fill your sprayer with water ONLY, and start walking and spraying just as if you were doing the actual application of herbicide. When you are done walking and spraying the 1,000 sq ft area note how much water it took you to spray that area, and that is the amount you will want to mix 1.3-1.8 oz of product with for each 1,000 sq ft area that needs to be treated. You will need to make sure treated areas are irrigated with at least 1/2 inch of water (either by rainfall or by sprinkler) following the application.