Yes, you can use Permethrin SFR 36.8% indoors for fleas. It cannot be applied to cats. Cats need to be kept out of the area during application and should not be allowed to return until everything is fully dry. Please take a look at our Cat Flea Control products to find products that are safe for direct application to cats.
No, Permethrin SFR 36.8% is not labeled for mites in a home; it is only labeled to eliminate mites in livestock premises.
Permethrin SFR 36.8% should be used within 24 hours of mixing with water in a sprayer for the mosot effective control.
We used to carry Dragnet SFR, but FMC (the manufacturer) discontinued it. It was the same thing as Permethrin SFR 36.8. We are not sure if the Dragnet FT (which we didn't carry) is the exact same formulation, but from looking up the label, it appears to be the same percentage of the same active ingredient. Please let us know if there a particular pest you are treating.
Permethrin SFR 36.8% is labeled for flies and may be a good option for you. You could also use a product like Bifen IT.
Permethrin SFR 36.8% should be used within 24 hours of mixing with water.
To treat fleas in lawns, you will use 0.4–0.8 oz. (2.4 - 4.8 tsp) of Permethrin SFR in 4 to 25 gallons of water per 1000 square feet.
Permethrin SFR? should not be used on pastures where horses or any livestock graze and grass cannot be consumed after dried. Very few products are listed as safe to use in grazing areas. Essentria All Purpose is one of our top products that will not harm the animals and will cover all the same insects the Permethrin SFR covers on its label.
We would recommend using Permethrin SFR 36.8% at the rate of 1 2/3 oz. per gallon water for ticks. It would also be a good idea to incorporate an insect growth regulator (IGR) such as Archer IGR for complete control of ticks. All of these products are pet safe if used as directed. Pets need to be kept out of the area being treated during application and until everything is completely dry.
Please look over our Tick Control Guide for more information on treating and preventing this pest.
No, you do not need to water the lawn after applying Permethrin SFR 36.8% since you are already using 4 to 25 gallons of water every 1,000 sq ft. The water is acting as the carrier – Per the prodcut label Mix 0.4 – 0.8 fl. oz. of Permethrin SFR in 4 to 25 gallons of water per 1000 square feet.Use the higher rate for fast knockdown and increased residual control. Dense or excessive (greater than 3 inches) lawn height and arid conditions may require higher volume application rates. Repeat application if necessary. Application in combination with compatible surfactants or wetting agents may enhance penetration
Permethrin SFR needs to be down for at least 6 hours prior to rain for it to be rainfast but preferably up to 24hrs.
Permethrin SFR 36.8% can be applied to the lawn for treating for sod webworms. You will mix 0.4 – 0.8 fl. oz. of Permethrin SFR in 4 to 25 gallons of water per 1000 square feet. Use the higher rate for fast knockdown and increased residual control. Dense or excessive (greater than 3 inches) lawn height and arid conditions may require higher volume application rates. Repeat application if necessary. Application in combination with compatible surfactants or wetting agents may enhance penetration.
Yes, Permethrin SFR 36.8% is labeled to control silverfish and it can be used outdoors. We would recommend using this product at the rate of 1 2/3 oz. per gallon water.
Per the product label, when treating for termites, you will use the 0.5% solution rate, which is 1 2/3 oz. of Permethrin SFR per gallon of water. Please refer to the label for complete application instructions.
Permethrin SFR 36.8% can be applied to cattle. For treating flies/lice, you will apply 4 fl oz per 2 1/2 gallons of low pressure spray or 1/2 fl oz per ear for ear tick. It can also be applied at the rate of 4 oz per 25 gallon (treats 50-100 heads). For scabies, mange, lice and ticks you will wet the animal thoroughly and repeat applications in 10-14 days. For a backrubber/self oiler, you will add 4 fl oz to 10 gallons of diesel oil or suitable mineral oil. Please refer to Pages 47 & 48 on the product label for specific mixing and application instructions prior to use.
Permethrin SFR 36.8% is not specfically labeled for clover mites. Bifen IT would be a better option.
Yes, Permethrin SFR 36.8% is labeled for use on livestock such as horses and cattle as well as other animals. We have listed the specifications for horses below but you can find more information on the product label.
For use on Horses to control: Horn flies, face flies,stable flies, house flies,horse flies, black flies,eye gnats, mange mites,scabies mites, ticks, lice and fleas: Use ¼ fl. oz. to 1 pt. water, 0.6257% AI. Low pressure spray. Application: 1-2 fl. oz. spray per animal. Spot treat back, face, legs tail and ears.
Yes, Permethrin can be mixed with Tekko Pro IGR.
Permethrin SFR is only labeled for mosquito control on livestock premises. A better product for mosquito control outdoors is Talstar P and it can be IGR such as Tekko Pro to help sterilize the adults. It is our most popular product for mosquito control and would be a better option. It is a liquid concentrate that you mix with water and apply using any hand pump sprayer or backpack sprayer. The key is to apply it to all shrubs, trees, and other foliage around the house or patio where you are trying to provide relief. It should be directed not only on top of the leaves and plants, but on the underside of the leaves as well, which is where the mosquitoes like to hang out. It should be applied every 30 days for optimum control.
You should choose one or the other. Bifen IT and Permethrin SFR should not be mixed together and there is no valid reason to do so.
Unfortunately, if Permethrin SFR 36.8% comes in contact with any edible vegetation it should be considered contaminated and should be discarded. It would be unsafe for consumption.
