We apologize we are not familiar with Triplet. Permthrin SFR is a great product, but we cannot recommend to mix the products together as we are unsure of the outcome. Most times we recommend to try a tank mix and if that works then the products should be able to be applied together.
When mixing Nyguard with Permethrin it states on the label to apply as a general surface application at the rate of 4 ml. in one gallon of water to treat 1,500 square feet. You may use up to 12 ml. per 1,500 square feet for insect populations that are difficult to control on in conditions that make it difficult to get control of target pests. Please see our Flea Treatment Article for more information and tips about treating for fleas indoors and outdoors.
Permethrin SFR 36.8% and TALSTAR PRO should not be mixed together. That would be over application. You can mix Talstar with Exponent for a super kick against insects.
Talstar P and Permethrin SFR should not be mixed. Talstar P should not be used indoors to treat fleas as it can only be applied to cracks and crevices. Please take a few moments to read over our article How to Get Rid of Fleas to learn how to implement a successful Flea control program.
We do not recommend over applying Permethrin SFR 36.8%. It would be a waste of product and could also create repellent tendencies. You don't want the insects to realize they are traveling over the treated area so that they will contact the application and die.
We recommend retreating with Permethrin SFR after 30 days for tick control. You may also want to add an Insect Growth Regulator for higher populations. Please see our Tick Treatment Guide for additional tips and information.
Permethrin SFR 36.8% cannot be used in a fogger.
Permethrin SFR 36.8% has the highest percentage that is available through our company.
Permethrin SFR 36.8% can be effective against Browntail Moths but direct contact must be made to increase the effectiveness. Pesticides should be applied when caterpillars are small and feeding, usually before the end of May.
Control of browntail moth populations in isolated areas may be obtained by clipping the overwintering webs and destroying these webs by either soaking in soapy water or burning them, according to the law ordinances in your county. This control should be undertaken in the winter and very early spring. For more information you can contact your local cooperative extension office.
No, Permethrin SFR 36.8% cannot be used in a fogger/mister. This product should only be used in a pump sprayer.
Permethrin SFR is not labeled for use on vegetable gardens and cannot be applied to anything edible.
Permethrin SFR 36.8% is not labeled to treat for white grubs. Milky Spore Spreader Mix is a great long term control granule for white grubs. Making 3 applications in Spring Summer & Fall over 2 years will provide your lawn with a 20 year protection against grubs. You can read more on How To Treat for Grubs here.
Permethrin SFR 36.8% is not labeled for applications on pecan trees for treating budmoths. We would suggest that you contact your local cooperative extension for a product recommendation and we will be happy to assist you!
Permethrin SFR 36.8% and Demand CS should not be mixed together. We recommend applying Demand CS alone for treating scorpions at a rate of 24 ml per gallon of water per 1,000 sq ft. For more information on treating scorpions, please take a few moments to review our article for a successful eradication program.
Permethrin SFR is a broad-spectrum insecticide that will flies and other common pests that contact the active ingredient or treated surfaces. Keep in mind that good fly control is dependent on locating and eliminating the breeding sites for these flies. Our Fly Treatment Guide has more tips on treating this pest.
The mixing rate of Permethrin SFR 36.8% is 1 2/3 fl oz per gallon of water.