Permethrin SFR 36.8% has a 30 day residual outside and a 90 day residual inside. It is safe for and pets if applied according to the instructions on the label. In the original wet state, it can irritate the skin. Pets need to be kept out of the area during application and until everything is fully dry.
You will use 0.4-0.8 oz. of Permethrin SFR per gallon of water every 21 days as necessary for bagworm control. Keep in mind that this needs to be applied before the bags have formed. If the bags have already formed, there is little you can do for control other than to physically remove them.
Yes, Permethrin SFR 36.8% is labeled to control earwigs.
You will apply 1.6 oz. of Permethrin SFR 36.8% per gallon of water for armyworms.
Yes, you can use Permethrin SFR on horses for horse flies. Per the product label: For use on Horses to control:Horn flies, face flies,stable flies, house flies,horse flies, black flies,eye gnats, mange mites,scabies mites, ticks, lice and fleas: Use ¼ fl. oz. to 1 pt. water, 0.6257% AI. Low pressure spray. Application: 1-2 fl. oz. spray per animal. Spot treat back, face, legs tail and ears.
Permethrin SFR 36.8% should not be used on pastures where horses or any livestock graze and grass cannot be consumed after it has dried. We would recommend contacting the manufacturer directly for advice on when it would be safe to allow grazing animals back into a treated area. Control Solutions can be reached at 800-242-5562.
Bengal Roach Spray is a permethrin based product that is only labeled for roaches. Permethrin SFR 36.8% can be used on livestock only to help control scabies mites. It cannot be used on humans or in residential areas to control scabies mites. We do not offer products for scabies mites in residential areas.
How long Permethrin SFR 36.8% takes to dry can vary depending on factors like how heavily it was applied and the humidity level in the area. In general, it will take a couple of hours to dry completely.
Permethrin SFR 36.8% is labeled for mole crickets. The labeled rate is 0.4 – 0.8 fl. oz. of Permethrin SFR in 4 to 25 gallons of water per 1000 square feet. Use the higher rate for fast knockdown and increased residual control. If you’re using the higher rate of 0.8 oz per 1000 sq ft, that would require 35.2 ounces for an acre.
Permethrin SFR 36.8% is labelled for many of the same insects as Bifen XTS and would actually be a good choice to use as a rotation insecticide. Typically you will want to rotate insecticides about every 6 months to prevent any type of resistance from developing when the same active ingredient or mode of action is used for an extended amount of time.
Permethrin SFR 36.8% is pet safe if used as directed however we do advise that the active ingredient Permethrin can be extremely toxic to cats if they are exposed to areas that have not dried completely. Keep pets out of the area while treating and do not allow them to re-enter the home until the application has fully dried.
You do not state exactly what type of worms you would be trying to use Permethrin SFR 36.8% to treat. This product has several pests on the label. If you happen to be speaking of things like heartworm or intestinal worms, no this product would not treat for anything like that.
Talstar P is not labeled for lice. Suspend SC is labeled for lice, however, it is not labeled for use inside of chicken coops.
We would recommend using something like Permethrin SFR in the area. It is labeled for lice and mites in poultry houses. The mixing ratio is 1 2/3 fl. oz. of product per gallon of water.
You will need 1 1/3 oz. of Permethrin SFR per gallon of water when treating for roaches. Everyone should be kept out of the treated area until everything is fully dry. It is not necessary to air out the house as long as there is adequate ventilation. You may want to look over our Roach Control Guide for more information on treating and preventing roaches.
The mixing rate of Permethrin SFR 36.8% for fire ants is 1 2/3 fl oz per gallon of water. For an acre, it is recommended that you use 32 fl oz in 20 gallons of water. The label recommends that you treat each mound directly and treat at least 4 feet around each mound so that the ants do not move their mounds.