Peters Professional 20-20-20 General Purpose Fertilizer is not labeled for use on edibles. We would recommend something like Dynamite Flower & Vegetable Plant Food 13-13-13 instead.
How much of a fertilizer such as the Peters Professional 20-20-20 General Purpose Fertilizer that you use will depend upon the amount of the nutrients (usually Nitrogen) you want to apply to your target plants. Please refer to the product label for complete nutrient rates. We would suggest you speak with a Master Gardener or your local Department of Agriculture for recommendations for your situation as we are not plant experts. You may also contact Everris, the manufacturer, for further information at 800-492-8255.
Peters Professional 20-20-20 General Purpose Fertilizer did not change color. The color may vary slightly from batch to batch.
The first step has to be to see what your soil is lacking. You should get a soil test done. You can do this by contacting your local extension office or by purchasing a low-cost kit and sending off the sample. You can see a kit and directions here:
https://www.domyown.com/soil-kit-p-23003.html
Peters Professional 20-20-20 General Purpose Fertilizer can be used on lawns, plants, shrubs and trees as a drip, foliar feed or soil drench. You can review the mix and application rates on the charts on the Product Label. For more specific product questions, you may wish to contact the manufacturer Everris at 800-492-8255, or via their website's contact page here.
Peters Professional 20-20-20 General Purpose Fertilizer only lists that it can be used irrigation systems but does not mention hydroponics. We would recommend reaching out to the manufacturer directly to confirm if it can be and if so how. They can be reached here.
Peters Professional 20-20-20 General Purpose Fertilizer can be reapplied every 7-10 days or as needed. Use at the rate of 1 tsp per gallon of water and apply the mixed to solution to potted plants until the soil is well saturated.
Peters Professional 20-20-20 General Purpose Fertilizer can be applied at a rate of 1 tsp. per 1 gal. of water for mixing in a watering can to apply to your ground flowers, per the chart on the product label.
You would mix 1 teaspoons of the Peters Professional 20 - 20 - 20 General Purpose Fertilizer with 1 gallon of water. Application rates depend solely on the desired ppm of desired Nitrogen. Please read over the Product Information Sheet for further assistance
Here is our lawn care calendar that will assist you with the timing of Peters Professional 20-20-20 General Purpose Fertilizer & other products
Peters Professional 20-20-20 General Purpose Fertilizer is a water soluble product. So you will mix the fertilizer in with water and apply it with a sprayer.
There should be no issues applying Tenacity around the same time as a feritlizer as long the label on the fertilizer does not state that it cannot be used with herbicides. We also recommend to wait 2-4 weeks between applications of herbicides and fertilizers to avoid over stressing the treated areas.
You would mix 1 teaspoons of the Peters Professional 20 - 20 - 20 General Purpose Fertilizer with 1 gallon of water. Application rates depend solely on the desired ppm of desired Nitrogen. Please read over the product label for further assistance.
Peters Professional 20 - 20 - 20 General Purpose Fertilizer is meant to be applied as a liquid fertilizer. Please refer to the product label for complete application instructions.
Peters Professional 20-20-20 General Purpose Fertilizer is not suitable for fertilizing lawns. Finding the correct fertilizer for your lawn is going to vary depending on what nutrients are needed in the lawn. We actually have a great guide that can explain how to select the best fertilizer for your lawn. You can find the guide here. We also have a lawn care schedule here that can help with timing.
Peters Professional 20-20-20 General Purpose Fertilizer is labeled to be used on lawns, platn, shrubs & trees. The label does not specify if Evergreens are included or not. We would suggest contacting the manufacturer directly. Everris can be reached at (843) 760-0679.
On average, a gallon of mixed solution will cover around 1000 sq/ft of area, however if you have dense plants you are fertilizing, you may need a higher water volume to achieve adequate reach of the nutrients. You can contact the manufacturer of the Peters Professional 20-20-20 General Purpose Fertilizer directly at 800-492-8255 if you have additional questions on use and mix rates for your needs.