According to the manufacturer's product label, Peters Professional 20-20-20 General Purpose Fertilizer is applied at a rate of 1 teaspoon per 1 gallon of water or 1 tablespoon per 2 gallons of water, when applying with a watering can or spray tank.
For additional product support, the manufacturer can be reached directly by calling 800-492-8255 or by visiting everris.us.com.
Peters Professional 20-20-20 General Purpose Fertilizer can be applied to plants, shrubs and trees, if used as directed according to the manufacturer's product label.
These products can be used together, but we typically suggest doing soil amendments a few weeks before using fertilizer. It can take a few weeks for the pH to actually change which means for those first few weeks the fertilizers may not be as useful as they would be if the soil was a better level for the grass/plant that's growing within it.
You would mix 1 teaspoons of the Peters Professional 20 - 20 - 20 General Purpose Fertilizer with 1 gallon of water. Application rates depend solely on the desired ppm of desired Nitrogen. Please read over the the Product Information Sheet for further assistance.
Yes, the Peters Professional 20-20-20 General Purpose Fertilizer are blue crystals.
When using Peters Professional 20-20-20 General Purpose Fertilizer for plants like flower beds, you can use 1 tsp per 1 gallon of water and apply using a watering can or sprayer. As long as you are not mixing the product too strongly, then it should not burn the plants you are treating. You do not need to wet the plants first before you fertilize.
Please review the product label for more information and application instructions
Peters Professional 20-20-20 General Purpose Fertilizer is not suitable for fertilizing lawns. Finding the correct fertilizer for your lawn is going to vary depending on what nutrients are needed in the lawn. We actually have a great guide that can explain how to select the best fertilizer for your lawn. You can find the guide here. We also have a lawn care schedule here that can help with timing.
Here is our lawn care calendar that will assist you with the timing of Peters Professional 20-20-20 General Purpose Fertilizer & other products
Peters Professional 20-20-20 General Purpose Fertilizer is not suitable for fertilizing lawns. Finding the correct fertilizer for your lawn is going to vary depending on what nutrients are needed in the lawn. We actually have a great guide that can explain how to select the best fertilizer for your lawn. You can find the guide here. We also have a lawn care schedule here that can help with timing.
Peters Professional 20-20-20 General Purpose Fertilizer only gives instructions for using in soil media not in hydroponic or semihydroponic systems. For further questions on specific other uses/doses, please contact Everris at 800-492-8255.
After reviewing the Product Information Sheet of Peters Professional 20 - 20 - 20 General Purpose Fertilizer, it shows that 1 tsp per gallon of water would be for approximately 238 ppm. It seems to get closer to the 150 ppm, you would need to be closer to a 1/2 tsp per gallon of water. We would recommend contacting the manufacturer directly to confirm. Everris can be reached at 800-492-8255.
Unfortunately we are not familiar with the EZ Flo 2 Gallon Fertilizing System since we do not carry that product. Please take a look at the contact the Peters Professional 20-20-20 General Purpose Fertilizer product sheet guide below for dilution recommendations or contact the EZ Flo manufacturer directly for assistance.
Everris NA Inc - 1-800-492-8255
How much of a fertilizer such as the Peters Professional 20-20-20 General Purpose Fertilizer that you use will depend upon the amount of the nutrients (usually Nitrogen) you want to apply to your target plants. Please refer to the product label for complete nutrient rates. We would suggest you speak with a Master Gardener or your local Department of Agriculture for recommendations for your situation as we are not plant experts. You may also contact Everris, the manufacturer, for further information at 800-492-8255.
Peters Professional 20-20-20 General Purpose Fertilizer can be applied every 7-10 days as needed, depending on the nutrient needs of the soil where it is applied.
Peters Professional 20-20-20 General Purpose Fertilizer is safe to use in irrigation systems but we are not certain about the system you have. We would recommend contacting the manufacturer directly to confirm. Everris can be reached at 800-492-8255.
How much of a fertilizer such as the Peters Professional 20-20-20 General Purpose Fertilizer that you use will depend upon the amount of the nutrients (usually Nitrogen) you want to apply to your target plants. Please refer to the product label for complete nutrient rates. It would be a good idea to contact your local cooperative extension office to speak with a master gardener for a recommendation on the exact application rate for your needs.
There are two different tables to check your rates for the Peters Professional 20-20-20 General Purpose Fertilzer on the information sheet here. The first table gives you the amount of product needed to make 1 gallon of product at the desired rates for your injection system ratio. So if you wanted 200 ppm N and you are using a 1:100 system, then you would use 13.5 lbs of the 20-20-20 to make 1 gallon of concentrate for your system. The second table gives you the gallons of water needed, so for 200 ppm and mixing an entire bag to get close to 200 gallons would be diluted a 25 bag in 197.5 gallons of water.
I hope this information helps. Please contact us if you have other questions.
