Have a Question? Ask Our Pros!
Premise Pre-Construction Insecticide is used for the prevention of termites. It offers affordability, high performance and excellent value for builders, pest management professionals, and design center architects. Most termiticide products on the market are repellent, which means termites can detect the treated areas and go around it. Premise Pre-Construction on the other hand, is a non repellent that allows termites to be in direct contact with the active ingredient, Imidacloprid. Premise Pre-Construction will not harm plumbing systems.
Product Documents
| Active Ingredient | Imidacloprid 21.4% |
|---|---|
| Target pests | Subterranean Termites, Carpenter Ants |
| For use in | Concrete slab-on-ground or basements, crawl spaces, hollow block foundations or voids |
| Application | Refer to Mixing Table on product label for proper amount of Premise Pre-Construction Insecticide to be used. Fill tank 1/4 to 1/3 full. If using large sprayer, start pump to begin bypass agitation and place end of treating tool in tank to allow circulation through hose. Add appropriate amount of Premise Pre-Construction Insecticide. Add remaining amount of water. Let pump run and allow recirculation through the hose for 2 to 3 minutes |
| Pet safe | Yes, if used as directed on Label |
| Yield |
To be mixed with water 100 gallons water with 27.5 fl. oz insecticide 50 gallons water with 13.8 fl. oz insecticide 25 gallons water with 6.9 fl. oz insecticide 1 gallon of water with 0.3 fl. oz insecticide Refer to product label for more details |
| Formulation | Professional Product |
| NOT FOR SALE TO |
AK, CA, NY, PR AZ, CO, CT, MA, MD, ME, NJ, NV, RI (Restricted To Licensed Applicators Only) |
| Shipping Weight | 20.94 lbs |
| Manufacturer | Envu (Formerly Bayer) (Mfg. Number: 1397684) |
| UPC | 00785740100264 |
| EPA Registration | 432-1331 |
Easy to use
Broad label flexibility saves time and labor
Low retreat rates – less than 1%, compared to upward of 5% with pyrethroids
| 5 stars | 1 | |
| 4 stars | 0 | |
| 3 stars | 0 | |
| 2 stars | 0 | |
| 1 star | 0 |
Was this answer helpful to you? YesNo
3 of 3 people found this answer helpful
Was this answer helpful to you? YesNo
2 of 2 people found this answer helpful
I'm doing some repairs on a structure with Termite damage. Would this product be suitable for treating the affected wood, to prevent termites damaging the new wood I'm installing as part of the repairs?
Premise Pre-Construction is used for the prevention of termites around the perimeter of your home. This product binds with the soil. We would recommend treating the wood directly with something like Boracare or Timbor. These products should only be used on raw wood only. Be sure to use a sealant or paint on the wood after application. This will last for the life of the wood once this has been done.
Was this answer helpful to you? YesNo
2 of 2 people found this answer helpful
Was this answer helpful to you? YesNo
1 of 1 people found this answer helpful
Premise Pre-Construction Insecticide
Rating: 5 (1 Reviews / 8 Q&A)
