Prime Source AzProp Select Fungicide

5 out of 5 stars 2 Reviews | 4 Q&A

Prime Source AzProp Select Fungicide
Price/Ea.
$321.11

Buy 2 or more: $318.56 each

Have a Question? Ask Our Pros!

Email Our Pros
We're here to help
Offline. Leave Us a Message

You May Also Need

Average Rating

5 out of 5 stars Rating: 5

2 Reviews | 4 Q&A

Product Overview

Prime Source AzProp Select is specially formulated to control disease-causing pathogens to turfgrasses. Contains two powerful active ingredients that help prevent fungal diseases on plants. It provides broad-spectrum preventive control to lawns, landscapes, golf courses, athletic fields, residential and commercial buildings, and recreational areas and parks. This product controls pathogens causing diseases such as dollar spot, leaf rust, anthracnose, leaf spot, brown patch, pink patch, red thread, bentgrass dead spot, and powdery mildew. It offers convenience because it may be tank mixed or used alternately with other spray programs as a foliar spray. For better results, continuous application of the product together with other fungicides is highly recommended.

Features and Specs

Active Ingredient Propiconazole 9.54% Azoxystrobin methyl 5.73%
Target pests Anthracnose, Bentgrass Dead Spot, Dollar spot, Fairy Ring, Gray Leaf Spot, Gray Snow mold, Leaf Rust, Leaf Spot, Melting Out, Pink patch, Pink Snow Mold, Powdery Mildew, Pythium Blight, Pythium Root Rot, Red Thread, Summer patch, Take-All Patch
For use in Commercial & Residential: Golf courses, Office Buildings, Landscape areas, Parks, Recreational areas, Athletic fields
Application Must be applied prior to disease development
Mix in with 2-4 gals. of water per 1,000 sq. ft. (87-174 gals./acre)
Pet safe Yes, if used as directed on Label
Formulation Professional Product
Group 3 & 11 Fungicide
NOT FOR SALE TO AK, AZ, HI
VT (Restricted To Licensed Applicators Only)
Special Features May be applied as a foliar spray in alternating spray programs or in tank mixes with other registered turf protectant products.
Shipping Weight 9.50 lbs
Manufacturer Prime Source
UPC 752830162877
EPA Registration 89442-41

Details

DIRECTIONS FOR USE

FAILURE TO FOLLOW THE USE DIRECTIONS AND RESTRICTIONS ON THIS LABEL MAY RESULT IN PLANT INJURY OR POOR DISEASE CONTROL.

Chemigation - Do not apply this through any irrigation/chemigation system.

RESTRICTIONS:

  • Do not graze or feed clippings from treated turf areas to animals.
  • Do not apply AzProp Select to the turf by air.

PRECAUTIONS:

  • AzProp Select has demonstrated some phytotoxic effects when mixed with products that are formulated as EC’s. These effects are enhanced if applications are made under cool, cloudy conditions and these conditions remain for several days following application. In addition, adjuvants that contain some form of silicone have also contributed to phytotoxicity.

INTEGRATED PEST (DISEASE) MANAGEMENT

AzProp Select should be integrated into an overall disease and pest management strategy whenever the use of a fungicide is required. Cultural practices known to reduce disease development should be followed. The SPECIFIC USE DIRECTIONS section in this label identifies specific IPM recommendations. Consult your local turf authority for additional IPM strategies established for your area. AzProp Select may be used in State Agricultural Extension advisory (disease forecasting) programs which recommend application timing based on environmental factors favorable for disease development.

SPRAYING/MIXING INSTRUCTIONS

Do not apply AzProp Select to the turf by air.

AzProp Select may be applied with all types of spray equipment commonly used for making ground applications. Do not apply AzProp Select through any type of ultra-low volume (ULV) spray system (less than 3 gals./A). Proper adjustments and calibration of spraying equipment to give good canopy penetration and coverage is essential for good disease control. The higher rates in the rate range and/ or shorter spray intervals may be required under conditions of heavy infection pressure, highly susceptible varieties, or when disease conducive environmental conditions exist.

Apply AzProp Select in sufficient water volume for adequate coverage.

MIXING INSTRUCTIONS

To prepare the spray solution, partially fill the spray tank with clean water and begin agitation. Add the specified amount of AzProp Select to the tank, allowing time for good dispersion, then add an adjuvant, if recommended. If tank mixes are required, the product should be added to the spray tank in the following order: AzProp Select, wettable granular or dry flowable formulations, wettable powders, and flowable (aqueous suspensions) products. Finish filling the tank to the desired volume to obtain the proper spray concentration. Maintain agitation throughout the spraying operation.

Do not allow spray mixture to stand overnight or for prolonged periods. Make-up only the amount of spray required for immediate use. Sprayers should be thoroughly cleaned immediately after application.

Do not use silicone-based products with AzProp Select due to possible phytotoxicity.

If the spray-tank mixture is unsprayed for more than 18 hours (overnight), the re-suspend product with agitation for 20 minutes.

AzProp Select is compatible with many commonly used fungicides, liquid fertilizers, herbicides, insecticides, and biological control products. If tank mixes are desired, observe all directions, precautions, and limitations on labeling of all products used.

Consult compatibility charts or your local or State turf authority for compatibility information. Do not combine AzProp Select in the spray tank with pesticides, surfactants, or fertilizers, unless compatibility charts or your own prior use has shown that the combination is physically compatible, effective, and non-injurious under your conditions of use. If physical compatibility is unknown, the following procedure should be followed. Pour the specified proportions of the products into a suitable container of water, mix thoroughly and allow to stand at least twenty (20) minutes, if the combination remains mixed or can be re-mixed readily, the mixture is considered physically compatible.

SPECIFIC USE DIRECTIONS

AzProp Select is recommended for control of certain pathogens causing foliar, stem, and root diseases, including leaf and stem blights, leaf spots, patch diseases, mildews, anthracnose, fairy rings, molds, and rusts of turfgrass plants. AzProp Select may be used to control certain diseases on turf in golf courses, lawns, and landscape areas around residential, institutional, public, commercial and industrial buildings, parks, recreational areas, and athletic fields.

Integrated Pest (Disease) Management (IPM): Sound turf management resulting in healthy, vigorous turf is the foundation of a good IPM program. Cultural practices such as proper choice of turf variety, nutrient management, proper cutting height, thatch management, and proper watering, drainage, and moisture stress management shall be integrated with the use of fungicides to increase turf vigor and reduce the susceptibility to disease. Immunoassay detection kits and extension service diagnostic services can assist in the early and accurate identification of causal organisms and corresponding selection of the proper fungicide when required.

Application Directions

AzProp Select must be applied prior to disease development. Mix AzProp Select with the required amount of water and apply as a dilute spray application in 2 - 4 gals. of water per 1,000 sq. ft. (87 - 174 gals./acre).

Apply AzProp Select at rates and timings as described in this label.

Repeat applications at specified intervals for as long as required. For spot treatments, use 1.5 fl. oz. AzProp Select per 1 - 2 gals. of water. Do not apply more than 8.1 gals. product per acre per year (23.75 fl. oz. product/1,000 sq. ft./year). Applications may be made by ground only.

For Use With Soil Injection Applications

AzProp Select may be applied through a liquid fungicide injector for the control of Ectotrophic root diseases including summer patch and take-all patch. Use AzProp Select only in liquid injection equipment specifically designated for pesticide use.

Apply AzProp Select at 1.5 - 3.0 fl. oz. per 1,000 sq. ft. Spray carrier volume should fall within 30 - 150 gals. of water per 1,000 sq. ft. Injection hole spacing of 1 inch by 1 inch is specified for optimum control. Injection depth must be no greater than 2 inches. One inch depth is specified for optimum results. The application must follow disease control strategies used for normal broadcast spray programs.

For Use in the Establishment of Turfgrass From Seed or in Overseeding of Dormant Turfgrass

AzProp Select may be used for control of certain turfgrass diseases associated with turfgrass establishment from seed. AzProp Select may also be used during overseeding of dormant turfgrass.

AzProp Select may be safely applied before or after seeding or at seedling germination and emergence to ryegrass, bentgrass, bluegrass, and fescue turfgrass types. Optimum application timing is during seeding. See Application Directions section.

Rate Ranges: Use the shorter specified application interval and/or use the higher specified rate when prolonged favorable disease conditions exist.

  • Anthracnose (Colletotrichum cereale) (formerly known as C. graminicola)
    • 1.5 - 3 fl. oz. product per 1,000 sq. ft.
    • 14 - 28 days interval
    • Use preventatively. Begin applications when conditions are favorable for disease infection, prior to disease symptom development. The maximum application interval for greens is 14 days.
  • Bentgrass Dead Spot (Ophiosphaerella Agrostis)
    • 1.5 - 3 fl. oz. product per 1,000 sq. ft.
    • 14 days interval
    • Begin applications prior to disease development.
  • Brown Patch (Rhizoctonia solani)
    • 0.75 - 1.5 fl. oz. product per 1,000 sq. ft.
    • 14 days interval
    • For higher cut cool season turfgrass, St. Augustine grass and centipede grass (fairways, lawns, sod farms, etc., above 0.375 inch in height). Apply when conditions are favorable for disease development
  • Brown Patch (Rhizoctonia solani) and other Rhizoctonia (R. spp.) diseases such as Large Patch, Zoysia Patch, Leaf & Sheath Spot (R. zeae)
    • 1.5 - 3 fl. oz. product per 1,000 sq. ft.
    • 14 - 28 days interval
    • For Brown Patch, apply when conditions are favorable for disease development.
    • For Large Patch of all warm-season turfgrasses, make 1 or 2 applications in the fall prior to infection or when conditions are favorable for infection.
    • For Zoysia Patch, make 1 or 2 applications approximately one month prior to Zoysia grass dormancy. Reapply 14 to 28 days later.
    • For Leaf & Sheath Spot (R. zeae), apply when conditions are favorable for infection such as sequential or periods of temperatures at or above 90 degrees Fahrenheit. Curative control may necessitate several applications. Target spray applications at crown of turfgrass.
  • Cool Weather Brown Patch Yellow Patch (Rhizoctonia cereale)
    • 3 fl. oz. product per 1,000 sq. ft.
    • 28 days interval
    • Make 1 or 2 applications in fall or when conditions are favorable for disease development.
  • Dichondra Rust (Puccinia dichondrae)
    • 3 fl. oz. product per 1,000 sq. ft.
    • 14 - 21 days interval
    • Apply when conditions are favorable for disease development.
  • Dollar Spot (Sclerotinia homoeocarpa)
    • 0.75 - 1.5 fl. oz. product per 1,000 sq. ft.
    • 7 - 14 days interval
    • Apply preventively on higher cut cool-season turfgrass (fairways, lawns, etc. mowed at or above 0.375 inch in height during periods of low to moderate disease pressure).
  • Dollar Spot (Sclerotinia homoeocarpa)
    • 1.5 - 3 fl. oz. product per 1,000 sq. ft.
    • 14 - 28 days interval
    • Apply preventively when conditions are favorable for disease development. For non-residential turf with active dollar spot, use the higher rate and combine with Daconil.
  • Fairy Ring (Lycoperdon spp., Agrocybe pediades, and Bovista plumbea)
    • 1.5 - 3 fl. oz. product per 1,000 sq. ft.
    • 14 - 28 days interval
    • Apply as soon as possible after fairy ring symptoms develop. Apply in 2-4 gals. of water per 1,000 sq. ft. Add the specified rate of a wetting agent to the final spray. Severely damaged or thin turf may require reseeding. Fairy ring symptoms may take 2 to 3 weeks to disappear following application. If the area is hydrophobic, use wetting agents and irrigate prior to application(s) of AzProp Select. Reapplication after 28 days may be required in some cases.
  • Gray Leaf Spot (Pyricularia grisea)
    • 1.5 - 3 fl. oz. product per 1,000 sq. ft.
    • 14 - 28 days interval
    • Use AzProp Select in a preventive disease control program. Begin applications before disease is present and alternate with other fungicide chemistries that control gray leaf spot.
  • Gray Snow Mold Typhula Blight (Typhula incarnata)
    • 5.25 fl. oz. product per 1,000 sq. ft.
    • single application
    • 3 fl. oz. product per 1,000 sq. ft.
    • 10 - 28 days interval
    • Make a single application of 5.25 fl. oz. or two applications of 3 fl. oz. spaced 10-28 days apart in late fall just before snow cover. Tank mixing with another snow mold fungicide, including Daconil and Medallion, may enhance control under severe disease pressure.
    • It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.
  • Leaf Rust Stem Rust Stripe Rust (Puccinia spp.)
    • 1.5 - 3 fl. oz. product per 1,000 sq. ft.
    • 14 - 28 days interval
    • Begin applications when conditions are favorable for disease infection, prior to disease symptom development.
  • Leaf Spot (Bipolaris sorokiniana)
    • 1.5 - 3 fl. oz. product per 1,000 sq. ft.
    • 14 - 21 days interval
    • Apply when conditions are favorable for disease development.
  • Melting Out (Drechslera poae)
    • 1.5 - 3 fl. oz. product per 1,000 sq. ft.
    • 14 - 21 days interval
    • Apply when conditions are favorable for disease development.
  • Microdochium Patch (formerly known as Fusarium Patch (Microdochium nivale)
    • 1.5 - 3 fl. oz. product per 1,000 sq. ft.
    • 14 - 28 days interval
    • Use preventatively. Begin applications when conditions are favorable for disease infection, prior to disease symptom development.
  • Necrotic Ring Spot (Ophiosphaerella korrae
    • 3 fl. oz. product per 1,000 sq. ft.
    • 14 - 28 days interval
    • Apply when conditions are favorable for disease development.
  • Pink Patch (Limonomyces roseipellis)
    • 1.5 - 3 fl. oz. product per 1,000 sq. ft.
    • 14 - 28 days interval
    • Apply when conditions are favorable for disease development.
  • Pink Snow Mold (Microdochium nivale)
    • 5.25 fl. oz. product per 1,000 sq. ft.
    • single application
    • 3 fl. oz. product per 1,000 sq. ft.
    • 10 - 28 days interval
    • Make a single application of 5.25 fl. oz.* or two applications of 3 fl. oz. spaced 10-28 days apart in late fall just before snow cover. Tank mixing with another snow mold fungicide, including Daconil and Medallion, may enhance control under severe disease pressure.
    • It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.
  • Powdery Mildew (Erysiphe graminis)
    • 1.6 - 3 fl. oz. product per 1,000 sq. ft.
    • 14 - 28 days interval
    • Begin applications when conditions are favorable for disease infection, prior to disease symptom development.
  • Pythium Blight, Pythium Root Rot (Pythium aphanidermatum, Pythium spp.)
    • 3 fl. oz. product per 1,000 sq. ft.
    • 10 - 14 days interval
    • Use preventatively. Begin applications when conditions are favorable for disease infection prior to disease symptom development.
    • During periods of prolonged favorable conditions, treat on the 10-day application interval. For use on newly seeded, as well as established turf.
  • Red Thread (Laetisaria fuciformis), Southern Blight (Sclerotium rolfsii)
    • 1.5 - 3 fl. oz. product per 1,000 sq. ft.
    • 14 - 28 days interval
    • Apply when conditions are favorable for disease development.
  • Spring Dead Spot (Ophiosphaerella korrae) or (Ophiosphaerella narmari) or (Ophiosphaerella herpotricha
    • 3 fl. oz. product per 1,000 sq. ft.
    • 14 - 28 days interval
    • Apply 1 or 2 applications approximately one month prior to bermudagrass dormancy. ½” to ½” of irrigation directly after application. Reapply 14 to 28 days later.
  • Summer Patch (Magnaporthe poae)
    • 1.5 - 3 fl. oz. product per 1,000 sq. ft.
    • 14 - 28 days interval
    • Apply when conditions are favorable for disease development. Initiate applications when soil temperatures reach 65°F at a 2 inch soil depth.
  • Take-all Patch (Gaeumannomyces graminis var. avenae
    • 3 fl. oz. product per 1,000 sq. ft.
    • 28 days interval
    • Begin applications when conditions are favorable for disease infection prior to disease symptom development. Make two applications, 28 days apart in the spring and two applications 28 days apart in the fall.
5 stars   2
4 stars   0
3 stars   0
2 stars   0
1 star   0
Review Search   
Sort Reviews
  • 5 of 5 Stars

    Worked great on my lawn

    By Michael on 10/29/2019

    We had problems with brown patch on our new St Augustine lawn due to overwatering and heavy rain. I quickly got tired of paying about $50 per treatment with Azoxy granules from your favorite big box store and began searching for something more cost effective. This Azoxy/Prop product combines two of the most effective fungicides into one mix that acts faster and costs about 10% of what the granules cost. Highly recommended.

    Was this review helpful to you?  YesNo

    4 of 5 people found this review helpful

  • 5 of 5 Stars

    Works as it should

    By Polo on 07/28/2023

    Great combo product that works to prevent fungus. You won't go wrong when your implementing this into your fungicide program

    Was this review helpful to you?  YesNo

See all 2 customer reviews

Questions & Answers

Have a question about this product?
  
Sort Questions
Q
What is the mix ration with water for Prime Source AzProp Select Fungicide? How many sq. feet will 1 quart cover?
A

The coverage rate of Prime Source AzProp Select Fungicide will vary depending on what you are treating for abd ib. Please see the mixing rates starting on page 7 of the label.


 

Was this answer helpful to you?  YesNo

Q
Should I water after application of Prime Source AzProp Select Fungicide?
A

Prime Source AzProp Select Fungicide should be applied with a sufficient water volume for adequate coverage at the time of application and wait 24 hours if your lawn requires irrigation.  The only time you irrigate after application is if treating for fairy ring per the product label.

Was this answer helpful to you?  YesNo

Q
Can Prime Source AzProp Select Fungicide be applied with a hose end sprayer? If so, how much per gallon?
A

It is not recommended apply Prime Source AzProp Select Fungicide with a hose end applicator as they do not deliver an even application and most do not go down to a low enough setting for proper dilution. It is best to use a hand-pump or backpack sprayer to ensure the most accurate application. 

Please view the product label for the recommended application rate for the lawn disease you are targeting. 


 

Was this answer helpful to you?  YesNo

Q
Curative rate

I saw the labels says it's to be used for a preventative but can this be used as a curative? Given it has similar percentages of azoxystrobin and propiconazole as two different off the shelf type products I would assume it could be used as a curative. If so, how many oz / gal are recommended?

A
Prime Source AzProp Select Fungicide must be applied prior to disease development. Please provide the targeted disease for curative options.

Was this answer helpful to you?  YesNo

See all 4 customer questions