Remedy Ultra Herbicide is not going to kill trees that larged that are just sprayed. It would be best to cut the trees and apply to the stump as directed on the product label.
Per the product label for Remedy, when treating for mesquite only, you would need to mix with Reclaim (though we do not carry this product) for best results. The rate to apply is 1/2 to 1 pint Remedy Ultra per acre in combination with 2/3 to 1 1/3 pint per acre of Reclaim. Apply with ground equiment in 10 gallons or more total volume per acre. Use a maximum of 1 gallon of oil per acre for ground application.
For cut stump treatment: Mix 20-30 gallons of Remedy Ultra in enough oil to make 100 gallons of spray mixture.
Please refer to the product label for complete instructions as further information is available for mesquite treatments on it.
The rates for Remedy Ultra Herbicide? vary depending on where and how you are treating. Please refer to the product label for complete information on your application. For spot treatment use a 1 to 1.5% solution of Remedy Ultra in water (1 to 1 1/2 gallons of Remedy Ultra in 100 gallons total spray mixture (or 0.78 to 1.92 fl oz per gallon) and spray the entire plant to completely wet the foliage.
Remedy Ultra Herbicide states on the product label that it may be tank mixed with labeled rates of others herbicides provided (1) the tank mix product is labeled for the timing and method of application for the use site to be treated; and (2) tank mixing is not prohitited by the label of the tank mix product.
Please refer to the complete label for full instructions and compatibility testing.
The best time to apply Remedy Ultra Herbicide is when the plants you are treating for are actively growing and temps are above 55 degrees.
Remedy Ultra does not have grazing restrictions except for lactating dairy animals. There is a pre-harvest interval for hay treated with Remedy Ultra of 14 days. You do need to be very careful when using Remedy or other products containing triclopyr around desirable trees or other ornamental plants. Be sure you do not contact the leaves, branches, or roots of desirable trees with the direct spray or mist of Remedy Ultra to avoid injury. Be sure to follow any other applicable restrictions on the product label.
You do not want to reseed areas treated with Remedy Ultra Herbicide for a minimum of three weeks following the application.
We apologize but are not aware of a product that can cleanup a spill of Remedy Ultra Herbicide. Best option would be to remove the soil it was spilled on and place new.
Yes, Remedy Ultra Herbicide is labeled to kill the Yucca plant. Please read and follow the label instructions.
Remedy Ultra Herbicide is not labeled for broom sage.
Remedy Ultra Herbicide should not be used in or near water as it is toxic to fish and other aquatic life.
According to the label, when using Remedy Ultra Herbicide for a Cut Stump Treatment you can apply at anytime, including in winter months, except when snow or water prevent spraying to the ground line. If the stump has been exposed to the rain, then for best results you need to make a fresh cut and then make your application. It would be best if you make the application at least 24 hours before you're expecting any more rain.
As we are sure you know, Macartney rose is extremely hard to control and nothing is truly going to be labeled for it. However, in doing some research, we found that the university studies and areas with the most success in controlling it used products like GrazonNext. We would not recommend using Remedy Ultra Herbicide because it contains the active ingredientTriclopyr, which almost every study showed to be ineffective at controlling this invasive plant. You will likely need to do multiple applications with GrazonNext and may need to even cut some of the stems and apply the solution undiluted to the fresh cuts to try and help the plant absorb it directly. You may also want to reach out to your local cooperative extension office, master gardeners program, or department of agriculture to see if they have any other suggestions of successful product use in your region or timing of application that would be best.
According to the manufacturer, there are no restrictions as far as burning on using your mesquite firewood after it has been treated with Remedy Ultra Herbicide.
According to the manufacturer, there are no burn restrictions as far as timing after applying Remedy Ultra Herbicide.
Remedy Ultra Herbicide is labeled for use on locust trees and you can do either the blanket spray to the actively growing areas, or a root drenching type spray to them after being cut with mowers. There are a couple of applications instructions on the Product Label you can follow which we have copied for you below.
Foliage Treatment with Ground Equipment: Use sufficient spray volume to completely and uniformly cover foliage. For ground application, apply 10 gallons or more of total spray volume per acre. Use higher spray volumes fo ground applications to ensure adequate coverage with increased depth and density of foliage, particularly for treatment of woody plants.
High Volume Foliage Treatment: For control of susceptible woody plants, use Remedy Ultra alone or in tank mix combination at the recommended rate to make 100 gallons of spray mixture. On rangeland and permanent pasture sites, make 1 application per year and apply no more than 2 quarts of Remedy Ultra per acre. To control a broader spectrum of woody plants and broadleaf weeds, Remedy Ultra may be tank mixed with other herbicides at recommended rates. Used alone- 1-2 qt Remedy Ultra per 1000 gallons of spray.
Dormant Stem Treatment: Mix 3 to 6 quarts of Remedy Ultra in enough oil to make 100 gallons of spray solution. Apply with a knapsack or power spraying equipment, using low pressure (20-40 psi). Treat anytime when brush is dormant and most of the foliage has dropped. Do not apply when snow or water prevent spraying to the ground line. Thoroughly wet the upper parts of the stems and use the remainder to wet the lower 12 to 15 inches above ground to the point of runoff. For root suckering species such as sumac, sassafras and locust, also spray the ground under the plant to cover small root suckers which may not be visible above the soil surface. For oil-water mixture application, mix 6 quarts of Remedy Ultra, 25 gallons of oil and 1.5 gallons of an approved agricultural spray emulsifier such as Sponto 712 or Triton X-100 as indicated on the mixing direction.
The rates for Remedy Ultra Herbicide will vary depending on where you are treating and what type(s) of weeds you need to treat. Please refer to the product label for complete application instructions.
Remedy Ultra Herbicide is not labeled to treat Woolly Croton. You need a product that has Dicamba in it, such as Hi Yield Range and Pasture Dicamba + D, which is labeled for Woolly Croton. Please read and follow the label instructions.
The active ingredient of Remedy Ultra Herbicide is triclopyr.
Remedy Ultra Herbicide is rainfast six hours after application.
