Time applications of Safari 20SG Systemic Insecticide with Dinotefuran to coincide with when most vulnerable pest life stage is present on plants (Majority of pests would be Spring time). Do not apply to wet bark, during rainfall, or if rain is expected within 12 hours. Control may be less effective in trees with thick bark, and at times when trees are not actively growing or transpiring.
Yes, you can use Safari 20SG Systemic Insecticide with Dinotefuran as a foliar spray and systemic drench. As a drench you can use 0.2 to 0.4 oz per 1,000 sq ft, as a systemic drench you can use 3 to 6 grams per foot of height with sufficient water; please follow the label instructions. We also recommend using two different products, you could use Safari 20SG for your systemic drench application and something like Talstar P for a foliar application using 0.5 to 1 oz per 1,000 sq.ft.
Per the product label for Safari 20SG Systemic Insecticide with Dinotefuran as a soil drench: Field Grown (In-Ground) Trees (Less than 24” diameter at breast height) 3-12 grams (1.25-5.0 level teaspoons) per inch of trunk diameter at breast height (DBH) 1.05-4.2 ounces per 10 inches of trunk diameter at breast height (DBH) For multi-stem trees, base rate on cumulative inches of diameter of all stems at breast height. Field Grown (In-Ground) Trees (24” diameter or greater at breast height) 6-12 grams (2.5-5.0 level teaspoons) per inch of trunk diameter at breast height (DBH) 2.1-4.2 ounces per 10 inches of trunk diameter at breast height (DBH) For multi-stem trees, base rate on cumulative inches of diameter of all stems at breast height.
The would be diluted in at least 5-10 gallons of water. Please refer to the product label for complete application instructions.
Safari 20SG Systemic Insecticide is not specifically labeled for pine bark beetles. We normally recommend using a synthetic pyrethroid like Talstar or Permethrin SFR. The biggest key with this insect is timing to ensure the infestation doesn't get out of hand. Once a tree is fully infested there isn't much you can do other than chop down the tree and burn it to try and prevent infestation of any neighboring trees.
You would use 12 – 24 oz of Safari 20SG per gallon of water. Depending on the bark type and thickness, one gallon of spray solution will typically cover 65-85” of cumulative trunk diameter. So to treat a tree with a 4” diameter, you would use 0.74 – 1.5 oz of Safari.
Treatments should generally begin in early May to mid June and should be done every year to protect trees from the Emerald Ash Borers using a basal spray with Safari 20SG.
Per the Safari 20SG Systemic Insecticide with Dinotefuran product label for woolly adelgids: Mix 1/4 to 1/2 lb per 100 gallons for foliar spray. For treatment of small areas: 1/2 - 1.0 tsp per gallon. 100 gals of spray mix will treat 20,000 sq ft of area when using a typical high volume sprayer. If using a low volume sprayer, adjust concentration to apply the same amount of product per unit area.
Per the Safari 20SG Systemic Insecticide with Dinotefuran product label: “Do not apply this product, by any application method, to linden, basswood or other Tilia species.” Due to the sensitive nature of Linden trees, we recommend speaking with the master gardener at your local cooperative extension office to determine what products can safely be applied.
Safari 20 SG Systemic Insecticide will typically last between 6 months to 1 year. Please keep in mind that there are many variables that can influence how long a systemic is still active in the target plant such as soil condition, rainfall, and health of the plant.
Safari 20SG is mixed at 1.0 tsp per gallon of water to cover 200 sq ft. for a foliar spray application for most treatments. Safari is a fairly complicated product to use, and we want to make sure you are getting the correct usage information, so we are recommending that you contact Valent directly. You can reach Valent by calling 800-682-6368. You will need to also provide the targeting insect as well. Please review the product label for complete directions.
The rate for Safari 20SG Systemtic Insecticide is 1.5 - 2.0 fl. oz. per inch of the trunk diameter diluted in at least 5-10 gallons of water. Please refer to the product label for complete application instructions.
Since Safari 20SG is a systemic product, you should allow anywhere from several days to several weeks for the product to translocate through the plants, depending on the size and growing stage of the treated plants.
Safari 20SG Systemic Insecticide with Dinotefuran is only labeled for non-bearing nut trees. We would not recommend consuming any pecans for at least a year after application.
Safari 20SG Systemic Insecticide with Dinotefuran is only labeled for use on non-bearing fruit trees. We do carry Bayer Advanced Fruit, Citrus and Vegetable Insect Control. This product provides systemic insect protection with a single application on fruit and nut trees, citrus, and vegetables listed on the label.
The rate for Safari 20SG Systemtic Insecticide is 1.5 - 2.0 fl. oz. per inch of the trunk diameter diluted in at least 5-10 gallons of water. Please refer to the product label for complete application instructions.
Safari 20SG Systemic Insecticide with Dinotefuran is not labeled for application to orchids.
