Talstar P Professional Insecticide - Questions & Answers

For outdoor use the Talstar P will be safe for animals of all kinds once dry. For indoor use if you have pet birds, we recommend removing the birds from the home while you treat and for at least 4-6 hours to give plenty of time for the product to dry and air out. Birds are more sensitive to chemicals and smells so keeping them out of the treatment areas for longer than pets like dogs and cats is recommended. If you have any safety concerns regarding its use around your birds please take info on the product to your birds vet for consultation. 

Phantom is a non-repellent insecticide that also has a transfer effect and is especially useful for insects that are social or extra sensitive like ants, roaches or bedbugs. Talstar P on the other hand will have a faster knockdown rate and is a bit more versatile as it can be used in more areas and for a wider variety of insects. When trying to decide which insecticide to use you need to know: 1. What are you trying to eliminate? 2. What areas need to be treated? After you answer those questions, read the product labels to make sure the pest and the treatment area are both listed. If you still need help deciding you can call us at 866-581-7378.

If the lizards are sprayed directly with the Talstar P it may cause them harm. If they travel over dried deposits of the Talstar P it would be less likely to cause any issues.

As long as you didn't spray the tomato plants with Talstar P , they should be safe to eat. Talstar P does not move through the soil and will not translocate.

Absolutely! NyGuard and Talstar can be mixed into the same gallon of water and sprayed for control of Fleas, Stored Product Pests, listed Roaches (German, Asian, and Brown-banded), Crickets, Litter Beetles, and Flying Insects.

Talstar P is our best selling product for chinch bug control. The key is to use lots of water to carry the Talstar P down to the thatch layer underneath the grass, where the chinch bugs do the damage. Please read the product label for proper use instructions.

Talstar P will not work as a systemic insecticide and will not eliminate insects inside the tree. You will need to purchase a product that contains imidacloprid such as Merit 75 WSP, Adonis 75 WSP, Adonis 2F, Dominion 2L, Criterion 75 WSP and Fertilome Tree and Shrub Systemic. Each of these products will work systemically to help treat for Emerald Ash Borers and Asian Long Horned Beetles but the application and usage rate will vary so you should read the product label of the product you are considering and make sure you are comfortable with the application before purchasing. Systemic products can take several weeks to translocate through a plant. Trees that have not been infested with these beetles can be protected with topical bark sprays like the Talstar P. We recommend you contact your local cooperative extension office and speak to the master gardener or entomologist on staff to find out when the best time to apply a systemic and/or a bark spray would be as this varies from region to region. Heavily infested trees may need to be taken down and chipped or burned to help save the neighboring trees.

Any fruit that was sprayed should be discarded. Please call the manufacturer of Talstar, FMC, for further instructions 800-321-1362.

Once Talstar has had a chance to dry completely it will not reconstitute and it will not pose a higher risk to your pets when it rains.

Talstar, when mixed according to the product label with water is only strong enough to kill small insects, like ants or stink bugs. Your dogs would have to eat huge amounts of stinks bugs at one time to have any type of negative effect on them. In most cases your dogs would not be able to consume enough stinkbugs that have come into contact with treated areas for there to be any cause for concern.

Yes, you can use any size sprayer to apply Talstar.  You typically mix 1 ounce per gallon of water, so if you are using a 2 gallon sprayer and going to fill it all of the way, then you would mix 2 ounces with the 2 gallons of water.

Talstar P is our most popular product for control of zoysia mites. You will need to dilute 1 fl oz of Talstar P per gallon of water and apply the dilution over 1,000 sq ft.

Talstar p should not be used for indoor flea control because it is restricted to cracks and crevices indoors. Ultracide would be a much better choice for indoor flea control. It is our recommendation and industry standard that you vacuum immediately before the application of Ultracide and every day or every other day after the application for the next two weeks. Vacuums can physically remove a decent percentage of flea eggs that are in the carpet, along with much of the organic crud that the flea larvae feed on.  The vacuum will also stimulate the flea adults still in their pupa form to quickly emerge as the adult, and at this point perhaps be sucked up in the vacuum or exposed to the Ultraicde application.  After two weeks most infestations require that you do a second application of the Ultracide and continue with the vacuuming. You should use a product that is registered to use on your pets for fleas such as Frontline or Advantage. Talstar P can be used effectively outdoors for places where your pets may frequent and also moist shady areas where fleas are likely to develop. Treating outdoors will help prevent your pets from re-infesting your home.

No, the herbs should not be eaten. Talstar is not labeled to spray on edible vegetation and the effects of eating food products contaminated by the insecticide are not known. We would definitely recommend covering the herbs in the future to prevent contamination.

Talstar P and Talstar PL work very well springtails and they can be used in the same areas. Springtails can be tough to control. You must find the moisture source and correct it to get rid of springtails completely. 

While we do not think the Talstar would hurt the birds, sometimes it is just a matter of perception. Basically if someone thinks the product is likely to hurt their beloved pet, they may think any health issues the pet has in the days, weeks, months following the application is because of the insecticide. We recommend closing the windows while the exterior treatments are being done and then opening them after the application has dried in order to avoid any issues. Talstar is odorless, dries clear and is known to be one of the safest insecticides to use around people and animals.

Talstar P is our most popular product for white fly. It is important to spray the underside of the leaves on infested plants for effective control. Heavily infested leaves should be plucked off the plant and tossed in a bucket of soapy water.

The Talstar P and the Cyonara 9.7 are both great products and are very comparable for general pest control. Talstar P is very gentle on plants and is odorless. If you have a bedbug problem or need a faster knockdown Cyonara 9.7 would be a better choice. Our recommendation here at DoMyOwnPestControl.com is if the product is working well for you, stick with it.

Talstar P will kill stinkbugs. You should dilute one ounce of Talstar P per gallon of water. You will use a hand pump sprayer to apply the solution on all door frames, window frames, areas where utilities (cables, pipes, wires) enter into the structure, a band of soil 6 to 10 feet adjacent to the structure, also to a height of 2 to 3 feet on the foundation where pests may be active or may find entrance. As the stink bugs crawl over the treated area, they will receive a lethal does of the insecticide and usually die within a few hours. You should treat every month starting in August and ending in November for best results.

Yes. Keep Talstar P applications to cracks and crevices around the perimeter of each room, door frames, window frames and other areas where you see stinkbugs emerging. Be sure pets are out of the area while you are applying Talstar P, and they can return as soon as the product is dry.