Talstar P Professional Insecticide - Questions & Answers

The Talstar P and the Cyonara 9.7 are both great products and are very comparable for general pest control. Talstar P is very gentle on plants and is odorless. If you have a bedbug problem or need a faster knockdown Cyonara 9.7 would be a better choice. Our recommendation here at DoMyOwnPestControl.com is if the product is working well for you, stick with it.

Talstar P will kill stinkbugs. You should dilute one ounce of Talstar P per gallon of water. You will use a hand pump sprayer to apply the solution on all door frames, window frames, areas where utilities (cables, pipes, wires) enter into the structure, a band of soil 6 to 10 feet adjacent to the structure, also to a height of 2 to 3 feet on the foundation where pests may be active or may find entrance. As the stink bugs crawl over the treated area, they will receive a lethal does of the insecticide and usually die within a few hours. You should treat every month starting in August and ending in November for best results.

Yes. Keep Talstar P applications to cracks and crevices around the perimeter of each room, door frames, window frames and other areas where you see stinkbugs emerging. Be sure pets are out of the area while you are applying Talstar P, and they can return as soon as the product is dry.

Talstar P and Talstar PL Granules in the yard work very well springtails and they can be used in the same areas. Springtails can be tough to control. You must find the moisture source and correct it to get rid of springtails completely.

No, Talstar will not say on your plants or in the soil indefinitely.  When used on your lawn or ornamentals like flowers and shrubs, Talstar will last about 2 to 3 months depending on where you live and your climate.

Absolutely not.  Talstar is not labeled to apply to any furniture, mattresses, or other areas that you may come into contact with.  Talstar is restricted to cracks and crevices and other areas that you would not come into contact with.  The instructions for applying Talstar for Bed Bugs are below, and you should know that even in the instructions it states that Talstar should not be used as your only protection against bed bugs.  Our most popular product for bed bugs is our bed bug kits.  

Bedbugs: Thorough application should be made to crack and crevices
where evidence of bed bugs occurs. This includes bed frames, box
springs, inside empty dressers and clothes closets and carpet edges,
high and low wall moldings and wallpaper edges. Do not use this product
on bed linens, pillows, mattresses or clothes. Remove all clothes
and other articles from dressers or clothes closets before application.
Allow all treated areas to thoroughly dry before use. Not recommended
for use as sole protection against bedbugs. If evidence of bedbugs is
found in/on mattresses, use products approved for this use.

As long as the grass and other areas are dry it is okay to go ahead and spray Talstar P.

Horseflies and many other species of biting flies tend to develop on the edge of bodies of water and since they are strong fliers these breeding areas can be near or far which makes finding the source next to impossible. You can apply a product such as Talstar P around the pool area and flies that land on the treated areas will be eliminated. Using Talstar will give some relief but since these flies can fly over treated areas it can be tough to get complete control. Relief should be on the way soon however as horsefly season is usually on 3-6 weeks long.

As long as the lizards are not sprayed directly with Talstar they should not suffer any ill effects from the use of the product. You may notice a reduction in the lizards however as their food source (insects) will be reduced or eliminated by using Talstar P.

Ground bees, also known as digger bees, can be very difficult to control no matter what product you use and they most likely will come back to your property year after year unless you do your part to alter your property to make it unfavorable to the bees. Ground bees prefer dry soils with thin grasses so irrigating the area frequently and correcting any issue that causes your grass to be thin will help deter the bees from nesting. In areas where you do not have grass, a layer of mulch will help deter the bees from nesting. Ground bees are solitary bees and are not very aggressive and are known to be a beneficial insect which is why you will not find any products specifically labeled for this type of bee. Talstar P can help provide some level of control but it will not get rid of all of the ground bees on your property. You should use Talstar P at a 1 oz of product to 1 gallon of water for a 1,000 sq ft area ratio. This will give you the fastest knockdown and the longest lasting residual. Talstar P does not offer an instant knockdown but will kill insects that come into contact with treated areas over a short period of time.

According to the Talstar P product label:

Chinch Bugs infest the base of grass plants and are often found in the thatch layer. Irrigation of the grass area before treatment will optimize the penetration of the insecticide to the area where the chinch bugs are located. Use higher volume applications if the thatch layer is excessive or if a relatively long
mowing height is being maintained. Chinch Bugs can be one of the most difficult pests to control in grasses and the higher application rates (Up to 1 fluid oz. per 1000 square feet) may be required to control populations that contain both nymphs and adults during the middle of the summer.

No, Talstar P (Talstar One) cannot be sprayed as a broadcast on carpet, it is strictly a crack and crevice application along baseboards, under cabinets, behind appliances, around windows, doors, etc. Please let us know what pest you are targeting so that we can make a specific recommendation for you.

An insecticide like Talstar P would be a great option for you for all of these pests, along with many others.  It is recommended to also use an insect growth regulator (IGR) like Archer IGR for fleas and ticks to stop them from reproducing.  Both of these products can be applied with a hand pump sprayer.  You may also want to look over our Pest Prevention Guide for more information.  

There is no particular time that you have to spray. Most people spray outside in early in the morning or when there is the least amount of insect activity. You will mix 1 oz of Talstar P with 1 gallon of water. That will treat 1,000 sq feet. 

Yes, Talstar P does a great job controlling Japanese Beetles. You will mix 1 oz per gallon of water per 1,000 sq ft. Talstar P should be applied every 30 days. 

Talstar P is safe if applied and dried prior to children entering the treated surfaces. If the treated area gets wet again, it does not reactivate the product. 

Talstar P Professional Insecticide needs to be watered in for some pests but not all.  Please review the product label for complete application information depending on your target pest.

These products should not be mixed together. There is no valid reason to mix Demon WP and Talstar P together.  Talstar P is a synthetic pyrethroid and Demon WP already contains a synthetic pyrethroid, so there would be nothing to gain by mixing these products together. Making a pesticide too strong can actually backfire. Areas that are treated with this overly concentrated spray will be repellent and insects will simply avoid the treated areas prolonging the infestation.

Talstar P is a great general use insecticide and can be used on trees, bushes and other ornamental plants and it labeled for many kinds of plant infesting insects. You should note that almost all insecticides have the potential to make evergreen trees loose a bit of their color.

We apologize after re-reading your question, we have determined a better recommendation for you. You can use Talstar P as a broadcast treatment out in the yard and around your home to treat those tiny black ants.