We advise to use your solution with 24 hours after mixing to gain full effectiveness of the product. The Talstar P (Talstar One) has a shelf life for up to 3-5 years when stored out of extreme tempertures. Please let us know if you need anything else.
While we do not recommend to apply Talstar P (Talstar One) at a higher rate than 1oz, your lawn should be just fine. Please keep in mind that it's also recommended to apply during cooler times of the day.
Talstar P (Talstar One) when applied per label is safe to use on grass where a septic is under the soil. Be sure to apply at least 5-10 feet away from the the well.
Talstar P is safe to apply on Pachysandra and can be dispersed using a hose end applicator. It is labeled for scale.
Talstar P must be used or discarded within 24 hours of mixing.
Talstar P (Talstar One) cannot be applied to edible vegetation. Malathion would be a better option.
You will loose effectiveness and it could damage your spraying equipment over time.
Talstar P cannot be used on anything edible, fruits or vegetables. We do however have many products that are labeled for gardens and fruit bearing trees. One of our most popular is our Malathion 55% Spray.
Talstar P (Talstar One) kills insects as they come into contact with the treated area (perimeter, bushes, lawn, ornamentals, baseboards, around windows, doors)
Talstar is not labeled for cankerworms. The most widely recommended product to use for cankerworms is Bacillus thuringiensis, or B.t. A product like Monterey B.t. Insecticide may be a better option for you. There is a great article here on the treatment and prevention of cankerworms.
As long as you follow instructions for each product you can tank mix Talstar P (Talstar One) with a fungicide. Applications to blooms should be avoided.
Talstar P (Talstar One) should be used within 24 hrs of mixing with water and then discarded.
You should use Talstar P (Talstar One) within 24 hours of mixing.
Most insecticides and herbicides are able to be tank mixed together, just make sure you follow each product label instructions for "tank mixing" instructions. You would want to keep kids out of the area while treating, they can return once the are has completely dried
Talstar P is mixed at 1 fl oz (2TBSP) per gallon of water per 1,000 sq ft.
Talstar P should be applied at least 5 feet away from a well.
It should not harm anything to apply Talstar at this rate one time. We recommend that you wait for 30 days outside (90 days inside) to reapply at the rate of 0.5-1 oz per gallon of water.
It is recommended to apply Talstar P monthly for mosquitoes.
As long as you are using the Talstar P at the proper dilution rate in the tank, the metering rate would just be dependent on how quickly you are walking during application. Unfortunatley, we do not carry Stihl blowers so we cannot give you an exact answer. However, we can thell you that with our Solo 451 blower, we suggest a metereing rate of 2 (from a range of 1-4) for a normal pace during application. For most applications, you will mix 0.5-1 oz per gallon per 1,000 sq ft.
Talstar P is gentle on ornamentals, lawns, trees etc if used as directed on establised plants if as directed on product label.