Talstar P Professional Insecticide - Questions & Answers

Talstar P will kill stinkbugs. You should dilute one ounce of Talstar P per gallon of water. You will use a hand pump sprayer to apply the solution on all door frames, window frames, areas where utilities (cables, pipes, wires) enter into the structure, a band of soil 6 to 10 feet adjacent to the structure, also to a height of 2 to 3 feet on the foundation where pests may be active or may find entrance. As the stink bugs crawl over the treated area, they will receive a lethal does of the insecticide and usually die within a few hours. You should treat every month starting in August and ending in November for best results.

Talstar P will kill stinkbugs. You should dilute one ounce of Talstar P per gallon of water. You will use a hand pump sprayer to apply the solution on all door frames, window frames, areas where utilities (cables, pipes, wires) enter into the structure, a band of soil 6 to 10 feet adjacent to the structure, also to a height of 2 to 3 feet on the foundation where pests may be active or may find entrance. As the stink bugs crawl over the treated area, they will receive a lethal does of the insecticide and usually die within a few hours. You should treat every month starting in August and ending in November for best results.

We would recommend Talstar P for your use. Talstar P is labeled to be used in poultry houses and chicken pens so it should not harm your chickens. You must make sure your chickens are out of the area while you apply Talstar P and then they can return to the area as soon as it is dry. You should dilute 1 ounce of Talstar P per gallon of water and using a hand pump sprayer apply the solution on all door frames, window frames, areas where utilities (cables, pipes, wires) enter into the structure, a band of soil 6 to 10 feet adjacent to the structure, also to a height of 2 to 3 feet on the foundation where pests may be active or may find entrance. As the stink bugs crawl over the treated area, they will receive a lethal does of the insecticide and usually die within a few hours. You should treat every month starting in August and ending in November for best results.

The Talstar P and the Cyonara 9.7 are both great products and are very comparable for general pest control. Talstar P is very gentle on plants and is odorless. If you have a bedbug problem or need a faster knockdown Cyonara 9.7 would be a better choice. Our recommendation here at DoMyOwnPestControl.com is if the product is working well for you, stick with it.

We have put together an Overwintering kit that is just for stink bugs. This kit includes Demon WP insecticide with Cypermethrin, Eco PCO dust and a hand duster for easy application. You should treat once a month through November for best results.

Talstar P is our most popular product for white fly. It is important to spray the underside of the leaves on infested plants for effective control. Heavily infested leaves should be plucked off the plant and tossed in a bucket of soapy water.

Asian beetles are generally seen as beneficial in gardens as they eat other bugs that are known to cause damage to plants. If this is not a vegetable garden and you need to get rid the Asian beetles, you can use Talstar P at a rate of 1 ounce per gallon of water. If you need to spray a vegetable or herb garden, you should contact your local cooperative extension office and seek further advice based on the type of plant that needs to be treated.

Talstar P is not labeled for use on edible plants and cannot be used on any edible vegetation. Please contact your local cooperative extension for advice on what products are allowed on your herb garden.

Talstar P is safe to use around animals. As long as they are out of the area while you are spraying, they can return as soon as the area is dry. Talstar P is odorless, dries clear, leaves no stains, is non-irritating to the skin, and will not break down easily with rainfall.

Yes. According to the Talstar P product label:

Mole Cricket adults: Achieving acceptable control of adult mole crickets is difficult because preferred grass areas are subject to continuous invasion during the early spring by this extremely active stage. Applications should be made as late in the day as possible and should be watered in with up to 0.5 inches of water immediately after treatment. If the soil is not moist, then it is important to irrigate
before application to bring the mole crickets closer to the soil surface where contact with the insecticide will be maximized. Grass areas that receive pressure from adult mole crickets should be treated at peak egg hatch to ensure optimum control of subsequent nymph populations (see below).

Mole Cricket nymphs: Grass areas that received intense adult mole cricket pressure in the spring should be treated immediately prior to peak egg hatch. Optimal control is achieved at this time because young nymphs are more susceptible to insecticides and they are located near the soil surface where the insecticide is most concentrated. Control of larger, more damaging, nymphs later in the
year may require both higher application rates and more frequent applications to maintain acceptable control. Applications should be made as late in the day as possible and should be watered in with up to 0.5 inches of water immediately after treatment. If the soil is not moist, then it is important to irrigate before application to bring the mole crickets closer to the soil surface where contact with the insecticide will be maximized.

According to the Talstar P product label, unless you are applying Talstar P in a small confined area that you can not immediately exit after the application, it is usually not necessary to use a respirator. We do recommend either wearing gloves or thoroughly washing your hands after handling insecticides. You should try not to mix more than you need, but in the event that you do, you will pour the unused solution out right up against the foundation of the structure.

Talstar P is the most popular choice for army worm control. You should spray later in the evening when the worms are most active. You will continue to see moths, but it is only the actual worm that causes damage. The Talstar P product label recommends:

"To ensure optimum control, delay watering (irrigation) or mowing for 24 hours after application. If the grass area is being maintained at a mowing height of greater than 1 inch, then higher application rates (Up to 1 fluid oz. per 1000 square feet) may be required during periods of high pest pressure"

We do carry and sell all of the same products professional pest control operators use. Unless you live in a restricted state, you can purchase and use the same products. (restricted states are listed on each individual product page on our site.) Talstar P would a great all around insecticide for you to use indoors and outdoors for preventative pest control. Talstar P kills over 75 different insect pests and has a long residual, so it keeps on killing pests for over three months after you have sprayed it. Plus, Talstar P is odorless, dries clear, leaves no stains, is non-irritating to the skin, and will not break down easily with rainfall. We also recommend that you use IPM or Integrated Pest Management to make the environment around your home unsuitable for insects. You can read more about IPM by reading our article : Integrated Pest Management IPM

Termidor SC is the #1 termite product on the market. When used as an in-ground barrier treatment, Termidor SC will protect your home or business for over 10 years. Termidor SC is completely undetectable by termites and once termites touch it they contact, ingest and spread the termiticide until it eliminates the entire colony. Termidor SC controls all types of termites including subterranean, formosan, and drywood termites. Talstar P lasts for about 5 years in the ground and works as a repellent, killing only those insects that come into contact with the treated area.

You can eat the fruit as long as the tree is not sprayed and the soil around the tree is not sprayed. Keep Talstar P out of the trees root zone.

You can spray around the perimeter of the play area with Talstar P. Talstar P has a long residual, so it keeps on killing pests for up to three months after you have sprayed it. Plus, Talstar P is odorless, dries clear, leaves no stains, is non-irritating to the skin, and will not break down easily with rainfall. We do not recommend spraying any insecticides directly on areas where children will be coming in skin contact on a regular basis.

Yes, Talstar P can be used for fire ant control in the type of sprayer you described, but you will also need to do mound drenching. According to the Talstar P product label, "Fire Ant Mound control is optimized by combining broadcast applications that will control foraging workers and newly mated fly-in queens with mound drenches that will control existing colonies. If the soil is not moist, then it is important to irrigate before application or use a high volume application. Apply broadcast treatments at 0.5 to 1 fluid oz. per 1,000 square feet. Use enough finished volume to penetrate thatch or sod. Treat mounds by applying 1 oz of Talstar P per mound in 1 to 2 gallons water by sprinkling the mound until it is wet and treat 3 feet out around the mound. Use the higher volume for mounds larger than 12”. Treat mounds with sufficient force to break their apex and allow the insecticide solution to flow into the ant tunnels. For best results, apply in cool weather (65 - 80˚F) or in early morning or late evening hours."

Please contact your local cooperative extension for advice on fertilizers. We have only recently branched into this area and are not yet giving advice on fertilizers.

Most of the synthetic pyrethroid insecticides on our site would do a great job for earwig control. Talstar P would be a great choice for earwigs. You can spray both indoors and outdoors with this product. Talstar P, one of our best sellers, has a long residual, is odorless, dries clear, leaves no stains, is non-irritating to the skin, and wont break down easily with rainfall.

You should not spray any edible vegetation such as pear trees with Talstar P. You should contact your local cooperative extension office for recommendations, as we are not sure what type of ant you are dealing with. The folks at the extension office are usually very well versed with local insects and what works best for them.