Talstar P Professional Insecticide - Questions & Answers

Yes, Talstar P (Talstar One) is labeled for aphids and can safely be applied to plants. Y

We can't sale anything to kill lizards. We can recommend to treat the bugs they are preying on. Talstar P will kill the insects they are preying on and thus the lizards should go elsewhere for food.

While the product will not hurt the carpet, Talstar P is not labeled to be broadcast sprayed over carpeted areas for carpet beetle control. Talstar P can only be used as a crack and crevice application indoors. For indoor carpet beetle control you may want to consider a product such as Nyguard Plus. This product contains an insecticide to kill the roaming adults and an insect growth regulator to stop the harder to kill immature beetles from reaching a reproductive state which in turn will break the cycle of infestation. As an added bonus this product also contains a deodorizer for carpet applications.

Talstar can be used in a backpack sprayer or a mist blower like the Solo 451 but it cannot be used in any type of fogging equipment. Please take a look at our Fogging Concentrates to see if any of these might be more suited to your application needs.

You should wear long sleeves, long pants and socks and shoes when using Talstar P. If you are sensitive you may also consider wearing gloves. A respirator should be used if you are spraying in non-vented areas. You can spray anytime though we do recommend you avoid spraying plants during the sunniest parts of the day because the liquid can magnify the sunlight and cause scorching. Talstar P is water based and will take as long as water would take to dry on any surface, usually about an hour or two.

Talstar is not designed to be used in a fogger of any sort, only sprayers or large mist blowers like a Solo 451. Using Talstar or any other insecticide not designed for a fogger could clog your equipment or lower the efficacy of the product as the ingredient are not designed for this type of application. You may want to consinder some of our Fogging Concentrates to see which best fits your needs and type of fogger. Please let us know if you have any other questions.

Yes, Talstar P is labeled for bees. If the honey bees contact the product they will be eradicated.

Talstar P will kill the ants that come in contac with the treated area. To eradicate the colony, we would recommend to use a product like Phantom kills by transfer, so they walk right over it and then spread it to other insects hidden behind walls or in their home colony, killing every other pest they come in contact with

We are not sure exactly what you are describing....it could be any number of things.  Springtails is what we are thinking of first, but cannot be sure.  Either way, we would recommend Talstar P.  Talstar P is our most popular pest control product and it is very safe to use as well. 

There is no certain of day that is best for general pest control on lawns, though we do advise not spraying during the heat of day to avoid scorching your lawn. Talstar can be sprayed year round as long as your soil is not frozen.

Chiggers are not known to infest structures and are most likely outdoors in your yard. Both Talstar and Onslaught are top-notch professional products and both are labeled for chiggers. Onslaught is micro-encapsulated and will last a little longer on outdoor surfaces which does give it a bit of advantage over Talstar P. Treatments for chiggers should begin in May and could need to continue through the summer as new chiggers move into the area. Treating the entire lawn is of little benefit because chiggers avoid direct sunlight and normally will not infest areas that are mowed or otherwise well maintained. Focus treatment on the unkempt areas of the lawn and lawn edge. You can also use Onslaught to do a barrier treatment around the outside of your home and in your crawl space to stop pests from moving indoors.

Talstar P mixed with an Insect Growth regulator such as Nyguard IGR would be a good choice for tick control. Talstar P would work to kill ticks that come into contact with treated surfaces while the Nyguard would work to help stop juvenile ticks from reaching sexual maturity. You should remember that ticks may be hidden in tall or dense brush so higher treatment volumes may be needed to treat the entire plant, not just the top side of the plant where it is easiest to spray. You should try to get the application on the underside of leaves and all the way to the bottom of the plant. We recommend treating the entire infested area (no spot treating). When you are dealing with an area that has a high tick population you may be required to treat once a month from spring through to the first frost, no matter what product you use. Be sure all pets are treated with a product labeled for tick control. The problem on your property may be that ticks are being reintroduced into the area on a consistent basis by wildlife such as deer, raccoons or birds. You will be required to use non-chemical means to reduce the tick population in addition to insecticides. As with most pests you can modify the environment on your property to make it less favorable to ticks. Keeping grass and weeds cut short in tick infested areas increases tick death during hot weather, discourages wildlife and will reduce the amount of vegetation which may need a pesticide application to kill ticks. Clear away yard debris such as old firewood or leaf piles. Remove old or abandoned bird nests and rodent nests. Patch fences where wildlife may be gaining access to your property. It may also be helpful to have the ticks identified. By identifying the type of ticks you can better understand what type of animals may be bringing them to your property and you can modify the environment to make it less favorable for that host animal. You can contact your local cooperative extension office to request an insect identification.

Talstar P can be mixed at 1 oz per gallon of water and be applied once a month to the exterior of the structure. We do not recommend applying it to any furniture. We suggest applying it to all non-edible shrubery and the tree foliage (especially targeting the undersides of the leaves). You can spray around window frames, door frames, the siding and lawn.

Talstar is a great general pest control product that can treat for over 75 insects listed on the label including spiders and ants. Talstar is odorless, dries clear, leaves no stains, is non-irritating, and will not break down easily with rainfall.

You will need to use 1 ounce of Talstar P per gallon of water for mosquito control.  Thank you for your order.  We appreciate your business! 

Yes, Talstar P (Talstar One) is labeled for caterpillars.

The surfaces treated with the Talstar P (Talstar One) should be completely dry prior anyone returning to those areas. They should remain gone for a minimum of 2 hrs.

Talstar P is labeled for roaches but is not the best choice, especially for German roaches, as they typically require a more aggressive treatment. German roaches reproduce at a rapid rate and can be resistant to many products that have been used over time. The most effective way to treat for German roaches is to use a combination of an insecticide residual spray, strong roach bait gel, and an insect growth regulator (IGR).  We would recommend using one of our Roach Control Kits so that you can be sure you have everything you need for a complete roach treatment program. You may also want to look over our Roach Control Treatment Guide for more information.  

Yes, Talstar P Professional Insecticide can be applied to any bushes, shrubs, trees, landscaped areas as well as flowering plants. However, you should minimize the spray on the actual flowering plants as you do not want it to expose the product to any bees that help with pollination. It is recommended that you spray when pollinators are not active, either in the early morning or late evening.