Have a Question? Ask Our Pros!
Ele-Max Turf Nectar AC 15-0-0 with 6% Iron is specially formulated for improved compatibility with amine herbicides. It is recommended for use as an additive in dry or liquid fertilizers and is compatible with most of the pesticides that can be utilized in combination with liquid fertilizers. This is intended as a supplement to a regular fertilizer program.
Ele-Max Turf Nectar AC may not be compatible with some liquid fertilizer formulations. A pre-mix “jar test” is recommended prior to mixing with liquid fertilizer to check compatibility.
NOTE: Ele-Max Turf Nectar AC cannot be used in liquid fertilizers which contain ortho-phosphates.
This product contains Iron which can stain concrete, wood or other surfaces. Care should be taken to prevent drift or sprays from contaminating non-soil areas.
Active Ingredient | Nitrogen ... 15% Sulfur ....... 3.4% Iron (FE) ..... 6% |
---|---|
For use in | Cool & Warm-Season Turf, Shrubs, Herbaceous Plants and Trees |
Application | * See label for complete application instructions |
Formulation | Professional Product |
NOT FOR SALE TO | AK, HI, WV |
Shipping Weight | 28.60 lbs |
Manufacturer | Helena Chemical |
APPLICATION AND MIXING
Ele-Max Turf Nectar AC may be applied by ground or aerial application. Use enough water for thorough uniform coverage of foliage or soil. Thorough coverage is necessary for best results and the addition of a non-ionic surfactant such as Induce is recommended.
TURF
WARM-SEASON TURF
Bahia, Bent, Centipede*, Tall Fescue, St. Augustine and Zoysia grass: Apply 2-8 oz. of Ele-Max Turf Nectar AC per 1,000 sq. ft. with sufficient water for good coverage. Three to five applications per growing season usually produces best results.
* When temperatures can exceed 90°F do not apply greater than 3 oz. of Ele-Max Turf Nectar AC per 1,000 sq. ft. if applying with other products.
Bermuda grass: Apply 4-10 oz. of Ele-Max Turf Nectar AC per 1,000 sq. ft. with sufficient water for good coverage. Three to five applications per growing season usually produces best results.
COOL-SEASON TURF
Bluegrass, Perennial Rye, Fescue, Bent grass. Apply 2-8 oz. of Ele-Max Turf Nectar AC per 1,000 sq. ft. with sufficient water for good coverage. Three to five applications per growing season usually produces best result. When temperatures can exceed 90° F do not apply greater than 3 oz. Ele-Max Turf Nectar AC per 1,000 sq. ft. if applying with other products.
ORNAMENTALS
SHRUBS
Azalea, Barberry, Burningbush, Camellia, Common Periwinkle, Cherry Laurel, Crepe Myrtle, Euonymus, Forsythia, Flowering Quince, Gardenia, Hibiscus, Honeysuckle, Hydrangea, Indian Hawthorn, Japanese/Southern Yew, Ligustrum, Lilac, Mock Orange, Oleander, Pittosporum, Primrose, Privet, Purple Sand Cherry, Pyracantha, Rhododendron, Rose, Spirea and Viburnum: Apply 2 fl. oz. (4 tablespoons) Ele-Max Turf Nectar AC per 1 gallon of water or 1.5 gallons Ele-Max Turf Nectar AC per 100 gallons of water.
CAUTION:
DO NOT apply to flower buds or blossoms. DO NOT apply to ornamentals that are under drought or moisture stress.
HERBACEOUS PLANTS
Hardy Aster, Alyssum, Canna, Carnation, Chrysanthemum, Coleus, Dahlia, Daylily, Dieffenbachia, Fern, Geranium, Gladiolus, Honeysuckle, Hosta, Iris, Larkspur, Marigold, Nasturtium, Ornamental Cabbage, Pampasgrass, Petunia, Portulaca (Moss Rose), Salvia, Sweet Pea, Verbena and Zinnia. Apply 2 teaspoons Ele-Max Turf Nectar AC per 1 gallon of water or 1 quart Ele-Max Turf Nectar AC per 100 gallons of water.
CAUTION:
DO NOT apply to flower buds or blossoms. DO NOT apply to ornamentals that are under drought or moisture stress.
Excellent product
By Bryan on 05/23/2018
Very easy too apply. Used a hand pump sprayer near the edges where grass meets concrete. Then a hose end sprayer set too 7oz per gallon for the open areas of the yard. Looks great and will order more! Used about a gallon of product on 14000sf of lawn!
Was this review helpful to you? YesNo
4 of 4 people found this review helpful
Fast Greening
By Bill on 05/03/2019
I used this on a very weak Bermuda grass lawn after I had used selective herbicides to get rid of weeds. Within about 3 days you could visually see color change and growth was beginning to jump start. Will definetly continue using this product.
Was this review helpful to you? YesNo
3 of 3 people found this review helpful
Great Product
By Brad on 04/26/2017
No visible impact
By Don on 04/09/2018
Not impressed at all, waste of money. Applied per instructions to lawn and shrubs. Lawn (St. Augustine) never showed any impact and bushes are difficult to read anyway. I might try it again later in the year but I have to get on schedule so went with something else.
Was this review helpful to you? YesNo
1 of 3 people found this review helpful
After 2 applications
By Billy on 09/27/2019
Most of the other liquid fertilizers sold here seem to require 20+ oz per 1000sqft. Yet this is only 2-4 oz per SqFt. What is making this so different?? Am I missing something?
Turf Nectar AC 15-0-0 is intended to be used as a supplement to a regular fertilization program, so it will be applied at lower rates than liquid fertilizers which are designed to be the primary source of nutrients.
Was this answer helpful to you? YesNo
4 of 4 people found this answer helpful
You can water the same day after applying Turf Nectar AC 15-0-0 with 6% Iron.
Was this answer helpful to you? YesNo
4 of 5 people found this answer helpful
Per the product label for Turf Nectar AC 15-0-0 with 6% Iron:
"If product is being mixed with pesticides and/or spray adjuvants, follow all precautionary statements on the accompanying product(s) labeling...
Ele-Max Turf Nectar AC may not be compatible with some liquid fertilizer formulations. A pre-mix 'jar test' is recommended prior to mixing with liquid fertilizer to check compatibility..."
"Ele-Max Turf Nectar AC should be introduced in the following sequence: 1. Water 2. Ele-Max Turf Nectar AC 3. Other Fertilizers or pesticides."
Was this answer helpful to you? YesNo
3 of 4 people found this answer helpful
Yes, you can mix Turf Nectar AC 15-0-0 with 6% Iron, but should be mixed in the tank in the following order per the product label: water, turf Nectar, then fertilizers or pesticides.
Was this answer helpful to you? YesNo
2 of 2 people found this answer helpful
The 2.5 gallon container (320 fl oz) of Turf Nectar AC 15-0-0 with 6% Iron will make 40 to 160 gallons of solution depending on the rate it is applied. For Centipede Lawns to apply at 2 fl oz to 8 fl oz per 1,000 sq ft with sufficient water for good coverage. In order to treat 2 acres with Turf Nectar AC 15-0-0 with 6% Iron, you would need to following depending on the rate you apply:
LOW RATE (2 fl oz per 1,000 sq feet: 174 fl oz)
HIGH RATE (8 fl oz per 1,000 sq ft: 696 fl oz)
It is recommended three to five applications per growing season usually produces best results.
Was this answer helpful to you? YesNo
1 of 1 people found this answer helpful
Turf Nectar AC 15-0-0 with 6% Iron Rating: 3 (5 Reviews / 5 Q&A)