VectorFog H100SF Thermal Fog Machine - Questions & Answers

Displaying 1 to 5 (of 5 questions)
Sort:
  • Asked by Daniel from Antigua
    03/29/2015
    Q
    Can you tell me the difference between the H100 and the H200.
    A

    The H200 is a little bit bigger (55" x 12" x 6") and as a 1.71 gallon (6.5 L) tank. The H100 measures 45" x 13" x 10" has a 1.18 gallon (4.5 L) tank. Both foggers are dual purpose foggers especially designed for applying water as well as oil based solutions with a droplet sizes between 5-30 microns. The solution tank pressure is the same at 2.13 PSI (0.147 bar)

    Was this answer helpful to you?   Yes No
    6 of 7 people found this answer helpful.
  • Asked by Yemi from Atlanta
    11/27/2014
    Q
    Warranty and After sales support
    Hello, What type of warranty is offered on this product and how do you support your clients nationally and internationally?
    A
    There is a one year warranty on the VectorFog H100SF Thermal Fog Machine on factory defects. If you have any questions regarding the warranty, you will have to speak directly to the manufacturer, VectorFog. Their US phone number is 1-844-259-0148.
    Was this answer helpful to you?   Yes No
    3 of 5 people found this answer helpful.
  • Asked by O from Miami, Fl
    07/25/2016
    Q
    Do I have to mix it with diesel or can I use an oil based insecticide only in VectorFog H100SF?
    If I have to mix it with diesel what's the mixing ratio with oil-based insects
    A

    VectorFog H100SF Thermal Fog Machine is a dual purpose fogger, specifically designed for applying oil based solutions as well as water.  You would need to refer to the product you are wanting to use in the fogger on if it should be mixed with diesel or water for the pest you are trying to treat for.

    Was this answer helpful to you?   Yes No
    3 of 9 people found this answer helpful.
  • Asked by Darren from Crawfordsville, Ar
    06/25/2018
    Q
    My VectorFog H100SF Thermal Fog Machine isn’t putting out the nice smoke that it did in the previous year. What should I do?
    A

    We would recommend checking directly with the manufacturer for troubleshooting the VectorFog H100SF Thermal Fog Machine. Please call customer service at Vector Fog at 1-844-780-6711.

    Was this answer helpful to you?   Yes No
    2 of 3 people found this answer helpful.
  • Asked by Jeff from Beaumont
    07/15/2017
    Q
    How many acres will the VectorFog H100SF Thermal Fog Machine treat ?
    A

    VectorFog H100SF Thermal Fog Machine application is not based on acres and depends on the settings.  It can create a mist or fog that forms an Ultra-Low Volume (ULV) droplet that is between 5-30 microns in length and solutions may be applied in concentrations of 10-90%, and with flow rates of over 10.5 gallons per hour (GPH) (40 LPH).

    Was this answer helpful to you?   Yes No
    1 of 3 people found this answer helpful.
Displaying 1 to 5 (of 5 questions)