DIRECTIONS FOR USE:

It is recommended to treat a limited number of plants and observe for phototoxicity over a 10-day period.

MIXING INSTRUCTIONS:

• Dilute in sufficient water to obtain thorough coverage.
• Fill clean spray tank 1/2 to 3/4 of the water to be sprayed and begin agitation.
• Add the appropriate amount of product to the spray tank.
• Fill the tank with the remaining water and agitate thoroughly.
• Adjust spray solution to pH of 5.5 - 7.0, if outside of that range.
• Apply product promptly after mixing.
• If the mixture is not applied immediately after mixing, agitate before application.

Start spraying as soon as listed insects first appear. Do not wait until plants are heavily infested. Repeat application as required to maintain effective kill, but not more than every 5-7 days. For foliar application, apply product in sufficient spray volume and with adequate spray pressure to ensure complete and thorough coverage of all plant surfaces including both the top and bottom of leaves. When pest pressure is extreme or plant canopy is dense, use higher specified rates and do not reapply within 24 hours. If possible apply in the early morning, or evening hours. The reduced UV exposure and lower temperatures will increase the performance and reduce the impact on pollinators.