There are many B&G Sprayers that use stainless steel for the tank. Please review the B&G Sprayer page and let us know if you have any questions.
Yes, oil based products like EcoVia EC can be used in the B&G Sprayer 1 Gallon 18 in. Wand & Extenda-Ban Valve (N124-S-18). It would be recommended to thoroughly clean the sprayer after use with a sprayer cleaner to remove any residual
There are replacement parts available for every part of the B&G Sprayer 1 Gallon 18 in Wand (N124-2-18). The B&G Gasket Repair Kit has all the parts to completely rebuild 1 sprayer.
The rubber gasket inside the pump is the called the Pump Gasket Part P-268
Your B&G Sprayer 1 Gallon 18 in. Wand (N124-S-18) tip could be clogged. We recommend to take a soft brush and try to clean it out. We do sell the B&G Sprayer Maintenance Kit here.
In order to install the line in your B&G Sprayer 1 Gallon 18 in. Wand (N124-S-18), please refer to Extenda-Ban Valve Repair and Maintenance on page 2 of the B&G product manual. If you have further questions you can reach B&G at 1-800-544-8811.
You did the right thing. The hose of the B&G Sprayer 1 Gallon 18 in. Wand is not supposed to swivel, it is fixed in one position when tightened.
The only sprayers that come with a true tip shut-off are B&G Sprayers such as the B&G 1 Gallon Pump Sprayer. You can purchase different tips for B&G sprayers, however they will only fit sprayers from this manufacturer. To reduce drip from the product left in the wand when spraying, you can release the tank pressure, hold your wand up vertically, and then squeeze the trigger to release some of the extra product.
The tip that comes with the B&G Sprayer 1 Gallon 18 in. Wand (N124-S-18) is the 4 Way Tip 5800 that features 2 sizes of pin-stream and 2 sizes of fan spray patterns. The B&G 5800-CC Multeejet Crack and Crevice Tip has a small opening to allow you to insert a small straw to perform a crack and crevice treatment.
The B&G Sprayer N124-S-18 has a fine fan, coarse fan, pin stream and a second pin stream tip.