The best place to store a product like Bifen XTS is in a secure location that is away from extreme heat or cold. If it is stored in this type of area, the shelf life is 3-5 years from the date of purchase. A storage shed may or may not be a good location depending on how well the temperature inside the shed is regulated.
Bifen XTS will kill termites that come in contact with it, and a termite treatment with Bifen XTS will last for 3-5 years. For the best complete prevention and treatment, we recommend that you use Termidor SC. Please visit our Barrier Treatment page for proper application. Once in the ground, Termidor will last for up to 10 years. For either termiticide, you will use 4 gallons of finished solution for every 10 linear feet around the structure you are treating. You can treat any time of year as long as the ground is not frozen, air temperatures are not below freezing, and there is no current precipitation.
Bifen XTS can be used to control stinkbugs outdoors. Bifen XTS, like most products, is not specifically labeled for stinkbugs because this pest is so new to the industry. Most professionals use the highest allowed usage rate on the product label for the area they are treating when trying to control stinkbugs.You should treat monthly through November for stinkbugs and other overwintering insects. You can start earlier next year around the July or August.
Bifen XTS does not stain, but you cannot spray as a broadcast over cement. You can only spray over cracks and crevices and you can spot treat on the structure where the boxelder bugs maybe gathering and trying to get in.
The mixing rate of Bifen XTS for sod webworms is 0.07-0.15 fl oz per 1000 square feet. This generally mixes in 1-2 gallons of water. To ensure the best control for sod webworms, postpone watering or mowing for at least 24 hours after application. This can be done every 21 days as needed.
Since Bifen XTS is oil-based it will hold up better outdoors than Bifen IT. Bifen XTS also has a higher percentage of active ingredient, so you will use less per application You may also want to take a look at our Fire Ant Control Page for more information on treating and preventing fire ants. Instructions for Fire Ant Control using Bifen XTS are below.
Bifen XTS for Fire Ant Mound Treatments:
Sprinkle the mound, using 1-2 gallons of dilution, until it is wet and apply to a 4 foot diameter circle around the mound. When treating mounds larger than 12”, use the higher volume. Do not treat in the heat of the day and for optimum results, apply in cool weather, such as in early morning or late evening hours
Bifen XTS will treat for Spider Mites and eggs safely on Juniper.
Bifen XTS cannot be used in a fogger. It should be applied with a sprayer and outdoors only. Please see the product label for complete instructions.
We have dine the conversions for you below:
.06% = .32 fl oz = 1.92 TSP
.12% = .64 fl oz = 1.28 TBSP
Bifen XTS is mixed at 1/6 fl oz to 1/3 fl oz per gallon of water per the label.
Bifen XTS is labeled for carpenter ants. Bifen XTS will eliminate carpenter ants that come into contact with treated surfaces. Termidor SC is the more popular choice for carpenter ant control because it is non-repellent, has a delayed reaction kill and has a transfer effect. This means that the ants cannot detect that an area has been sprayed and cannot avoid the treated area, as they walk over the area they pick small particles of Termidor SC up on their body and inadvertently carry back to the colony spreading it to other ants.