Bifen XTS will not harm trees if used as directed on the product label.
No, Bifen XTS is not labeled for indoor use for fleas. We would recommend our Indoor Flea Kit. Here is a great video on how to use our Indoor Kit. You may also want to look over our Flea Control Guide for more information.
Bifen XTS will kill termites that come in contact with it, and a termite treatment with Bifen XTS will last for 3-5 years. For the best complete prevention and treatment, we recommend that you use Taurus SC. Please visit our Barrier Treatment page for proper application. Once in the ground, Taurus SC will last for up to 10 years. For either termiticide, you will use 4 gallons of finished solution for every 10 linear feet around the structure you are treating. You can treat any time of year as long as the ground is not frozen, air temperatures are not below freezing, and there is no current precipitation.
The rate for Bifen XTS for webworms is not set per gallon but by area. You will use 0.07-0.15 fl oz per 1000 square feet. This generally mixes in 1-2 gallons of water. This can be done every 21 days as needed. To ensure that the best control of Armyworms, Cutworms, and Sod Webworms is achieved, postpone watering or mowing for 24 hours following application
Yes, Bifen XTS is labeled for armyworms. According to the product label, it is mixed at 0.07-0.15 fl oz per gallon of water per 1,000 sq ft when treating armyworms.
There is no specific time to wait after applying Bifen XTS and seeding.
Bifen XTS is labeled to treat armyworms and safe to use on your bermudagrass and buffalograss. To ensure that the best control of Armyworms, Cutworms, and Sod Webworms is achieved, postpone watering or mowing for 24 hours following application.
Bifen XTS is labeled as safe for use on non-bearing fruit and nut trees only.
Bifen XTS can be used to control stinkbugs outdoors. Bifen XTS, like most products, is not specifically labeled for stinkbugs because this pest is so new to the industry. Most professionals use the highest allowed usage rate on the product label for the area they are treating when trying to control stinkbugs.You should treat monthly through November for stinkbugs and other overwintering insects. You can start earlier next year around the July or August.
Yes, Bifen XTS is labeled for army worms. Be sure to read the product label for complete application instructions.
Bifen XTS is labeled for army worms. You would mix 0.07-0.15 oz per 1000 square ft. The label states to ensure that the best control of Armyworms, Cutworms, and Sod Webworms is achieved, postpone watering or mowing for 24 hours following application.
Yes, Bifen XTS is labeled for armyworms. According to the product label, it is mixed at 0.07-0.15 fl oz per gallon of water per 1,000 sq ft when treating armyworms.
Bifen XTS can cause burning to the lawn if applied during the heat of the day. It is best to apply in the morning before temperatures get too high.
Bifen XTS is only labeled for indoor use in basements and crawl spaces for the treatment of subterranean termites. If used according to the product label, it should not have any effect in the main living space of the home.
According to the manufacturer, for chinch bugs, you will use 1/6-1/3 oz. of Bifen XTS per gallon of water. To maximize efficacy against subsurface pests, apply with a non-ionic surfactant and irrigate treated areas with 0.25-0.5 inches of water immediately following application, taking special care to prevent run-off or puddling.
Bifen XTS should be applied 25 ft away from areas with water. Apply on a non windy day to avoid drift to water areas.