DIRECTIONS FOR USE:

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

STOP - READ ENTIRE LABEL BEFORE USE.

Do no tallow children or pets into the treated area until dry.

In New York State, this product may not be applied to lawns within 100 ft. of a coastal marsh, or stream that drains directly into a coastal marsh.

Do not water the treated area to the point of run-off. Do not make applications during the rain. All outdoor applications must be limited to spot or crack-and-crevice treatments only, except for the following permitted uses:

1. Treatment to soil or vegetation around structure;
2. Application to lawns, turf and other vegetation;
3. Applications to building foundations, all outdoor applications to impervious surfaces such as sidewalks, driveways, patios, porches and structural surfaces (such as windows, doors, and eaves) are limited to spot and crack-and-crevice applications only.

APPLICATION INSTRUCTIONS:

• Shake well before each use.
• To avoid extreme wetting and waste of product, adjust nozzle to narrow fan spray. Hold sprayer about 1 foot from plant and spray just enough to cover the area that is to be treated.

NOTE: This product will not stain most home siding. However, before using, it is recommended to test on the siding (vinyl in particular) in an area that is not readily visible. Recheck after a few hours. If any staining is observed, DO NOT USE.

LAWNS:

A few hours to application, completely wet the grass, and apply as a thorough coverage spray. One quart will treat 62.5 sq. ft. For ideal control of surface insects, postpone additional watering or mowing for 24 hours. Treat ants and other insects when they begin to appear or when you notice lawn damage.

Do not apply more than 10 times per location, per year.

OUTDOOR PESTS:

To significantly reduce the potential for entry by crawling pests, apply a constant band of insecticide around building foundation. Apply as a spot or crack-and-crevice spray around windows, doors, eaves, vents and other areas. For more effective treatments, remove debris, leaf litter and other matter that is adjacent to the foundation that could possibly harbor pests. Apply a 3 ft. band around the structure and upwards along the foundation to 3 feet. Apply as a spot or crack-and-crevice spray around windows, doors, and roof overhangs. For the insecticide to reach the soil or thatch layer where pests may be active, apply as a coarse spray to completely wet the foundation and/or band area, 1 quart will treat 62.5 sq. ft. of surface area.

OUTDOOR SURFACES:

Make a residual application to ornamental plants adjacent to foundations of building. Apply as a spot or crack-and-crevice spray to surfaces such as, but not limited to porches, screens, window frames, eaves, patios and garages where pests are active.

Works for up to 8 weeks on vinyl siding.

ORNAMENTAL TREES, SHRUBS AND FLOWERS:

Apply thoroughly as a foliar spray to both sides of plant leaves and all plant surfaces where insects are present. For optimum results, apply early prior to high insect populations.

NOTE: For Scale control, treat the whole plant, including the stem, trunks, and twigs. For Bagworm control, apply when bagworm larvae start to hatch.

INSECTS CONTROLLED:

Ants, aphids, armyworms, budworms, cockroaches, crickets, cutworms, earwigs, European crane flies, fleas, fruit flies, Green June beetles, Japanese beetles, leafhopper, lawn moths, millipedes, palmetto bugs, sowbugs, mites, spittlebugs, springtails, deer ticks, waterbugs, gnats, centipedes, mosquitoes, flies, pillbugs, scorpions, Azalea caterpillar, bagworms, black vine weevil, boxelder bugs, broadmites, brown softscale, Californina oakworm, California redscale (crawlers), cankerworms, clovermites, Eastern tent caterpillar, Elm leaf beetles, European sawfly, fall webworm, flea beetles, forest tent caterpillar, fungus gnat, gypsy moth larvae, lace bugs, leaf feeding caterpillars, leafminers, leaf rollers, leaf skeletonizers, mealybugs, midges, Oleander moth larvae, pineneedle scale, pine sawfly, pine shoot beetles, pinetip moths, plant bugs, root weevil, spiders, spider mites, striped beetles, striped oakworm, thrips, tip moth, tussock moth larvae, whiteflies, alfalfa looper, beet armyworm, cabbage looper, cabbage webworm, corn earworm, diamondback moth, fall armyworm, grasshopper, imported cabbageworm, Lygus bug, meadow spittlebug, Southern cabbageworm, stink bug, yellow-striped armyworm, bean leaf beetle, chinch bug, corn leaf aphid, English grain aphid, European corn borer, green bug, green cloverworm, hop vine borer, Mexican corn rootworm beetle, Northern corn rootworm beetle, sap beetle, Southern corn rootworm beetle, Southwestern corn borer, stalk borer, tobacco budworm, Western bean cutworm, Western corn rootwom beetle, Southern armyworm, tarnished plant bug, saltmarsh caterpillar, flowerthrips, onion maggot, onion thrips, seedcorn maggot, Western flower thrips, tomato fruitworm, tomato pinworm.

ENVIRONMENTAL HAZARDS

This pesticide is extremely toxic to fish and other aquatic organisms. To protect the environment, do not allow pesticide to enter or run off into storm drains, drainage ditches, gutters or surface waters. Applying this product in calm weather when rain is not predicted for the next 24 hours will help to ensure that wind or rain does not blow or wash pesticide off the treatment area.

This product is highly toxic to bees exposed to direct treatment or residues on blooming crops or weeds. Do not apply this product or allow it to drift to blooming crops or weeds if bees are visiting the treatment area.