Bora-Care should only be applied to raw, natural wood. For more information on treating for powderpost beetles, please take a few moments to review our treatment article for successful eradication.
Bora-Care can be used on raw, untreated wood surfaces indoors and is safe for kids and pets once dry.
Bora-Care would be the best product to use for dry rot. Bora-Care, can only be applied to raw wood. It can not be applied to any wood that is painted, stained, or sealed.
Bora-Care can be applied in any temperature as long as it is not below freezing. However, the warmer the temperature the easier it will be to mix and apply the Bora-Care because of its thick consistency.
Boracare cannot be used in misting equipment but could be used in foaming equipment, and we carry a few types. The Foamer Simpson or Chapin Poly Foamer would be able to be used along with a foaming concentrate like the ProFoam. Once foamed it will only penetrate the wood that it touches, so be sure applications are made directly in areas that contact infested wood or wood you are wanting to protect. If foaming wall voids would not contact the wood you need to treat you will need to drill into the wood and inject following the instructions on the product label.
Thank you for your feedback. We appreciate your business! You may still be able to use Boracare as you have described, depending on the rate at which you mix it. 1:1, 1:2, 1:3 and 1:4 mixture ratios must be used within 24 hours to prevent the product from degrading. A 1:5 mixture ratio can remain stable for up to 30 days. You should do your best to only mix enough solution for the job you are doing that day to prevent having to discard any solution. We are not aware of another product that can be saved for later use once it has been mixed into solution. After that point most products will start to not only break down and be less effective.
Does the picture frame hold any type of sentimental value? If it doesn't then we suggest tossing it out if infested with powder post beetles. If it does, you can make sure to sand down to the raw wood and apply a product such as Bora-Care on all sides of the wood. This only comes in a gallon concentrate size and that is a lot of product for this small object. Please let us know if you need anything else.
Bora-Care treatments take approx. 72 hours to dry. After that you can do what you wish to the wood including applying a finish.
No, Boracare is not labeled for carpenter bees.
For carpenter bees, we would recommend using our Carpenter Bee Kit. It has everything inside of it to do a complete treatment for bees.
Please also check out our Carpenter Bee Guide for wonderful tips on how to treat and prevent them in the future.
Bora-Care is an insecticide used for treating wood boring insects and is meant to be applied to raw wood. It is not labeled for use on turf grass. If Bora-Care was accidentally applied to your lawn it will most likely kill it. Borate, Boracare's active ingredient, kills plant life, including grass, trees and shrubs.
Are you trying to treat an active infestation of something or prevention?
Powderpost beetles can lay dormant for years in the wood and Boracare will not kill them until they are actively feeding. Even after applying a product like Boracare to all sides of the infested raw wood (ideal situation) you can often still see signs of activity of the powder post beetles for a few years after treatment. This is because the product works through ingestion so as the larvae emerge from the wood (which is whenever they are good and ready) they eat the wood on their way out and ingest it and die. No new adults will be able to leave them in any holes in the wood as again, once they ingest it they will die.
Placing treated wood in a sealed bag will not increase the speed at which this happens. If it is just one piece of furniture that is infested and you want a quicker kill, you can also contact local furniture finishers or pest control operators who may offer a heat chamber. Heating the furniture up to over 140 degrees for several hours will any pest that is inside where dormant or not.
Boracare is a very viscous liquid that needs to be thoroughly mixed with warm -hot water and thinned out before application. The label states that it can be applied by sprayer or by painting or rolling the product on but we are not sure that submerging the wood in the solution will be a proper application as it should only be applied until wet and not to the point of run off or oversaturation.
Bora-Care can be applied to log cabins or other wood surfaces that are in its natural form without a finish, varnish, sealant, paint or stain. Otherwise the solution will not penetrate into the wood to target the listed pests.
Bora-Care is safe if it is applied to raw wood when the pets are not present. Once the treated surfaces have completely, it is safe for them to returned to the treated areas/surfaces.
Yes, after Bora-Care is applied and it dries, you can paint or use a stain on the wood.
Pets and people need to be kept out of the area while Boracare is being applied. Once the product dries completely, it is safe for them to return. Boracare is not labeled for use on trees. We would recommend using a general insecticide, such as Suspend SC, on your trees for ants. This can be used every 30 days as needed.
No, Boracare is not labeled for carpenter bees.
For carpenter bees, we would recommend using our Carpenter Bee Kit. It has everything you need to do a complete treatment for bees.
Please also check out our Carpenter Bee Guide for more tips on how to treat and prevent them in the future.
Boracare should only be used to prevent carpenter ants. We do not recommend using it to treat and active infestation. You can treat and active infestation by using something like Carpenter Ant Bait or by treating directly with a product like Phantom Aerosol or Termidor Foam.
