How Cyper WP Insecticide Works

Cyper WP is a residual insecticide concentrate with the active ingredient Cypermethrin. Cypermethrin is in the synthetic pyrethroid class of insecticides. It is a man-made active ingredient that attacks the central nervous system of insects that come in contact with or ingest it. Cyper WP is diluted with water and applied with a gallon pump sprayer. After it dries, Cyper WP continues to work for up to 3 months.

Cyper WP Target Pests

A variety of crawling and flying pests including (but not limited to) ants, carpenter ants, cockroaches, crickets, scorpions, and spiders

PESTS CONTROLLED WITH CYPER WP: Ants, Bees, Boxelder Bugs, Carpenter Ants, Carpenter Bees, Centipedes, Chiggers, Cockroaches, Crickets, Earwigs, Elm Leaf Beetles, Fire Ants (mounds), Firebrats, Fleas, Flies, Millipedes, Mites, Mosquitoes, Pillbugs, Scorpions, Silverfish, Sod Webworms, Sowbugs, Spiders, Ticks,  Termites (above ground only)

Target Uses of Cyper WP

Cyper WP (same as Demon WP and Cynoff WP) insecticide is a loose white powder that is mixed with water. It can be applied as a crack and crevice and/or spot treatment for residual and contact control of ants, bees, biting flies, boxelder bugs, centipedes, cockroaches, crickets, earwigs, elm leaf beetles, firebrats, fleas, flies, millipedes, mosquitoes, pillbugs, silverfish, sowbugs, spiders, ticks, and wasps.

Cyper WP has a residual of up to 3 months. 1 x 1lb. container of Cyper WP yields up to 48 gallons of finished product.

Cyper WP (Wettable Powder) is excellent for larger, tougher pests such as cockroaches, spiders, scorpions, or stink bugs because there is a high concentration of active ingredient. The wettable powder formulation also makes Cyper WP ideal for porous surfaces such as concrete since the individual particles of active ingredient are larger and can more easily stay on top of the surface.

*Cyper WP leaves a white powdery film that may be visible on darker surfaces. For applications where this is a concern, consider using a liquid concentrate instead.

ACTIVE INGREDIENT: Cypermethrin 40.0%

Cyper WP Application Instructions

ec55c5ddb6cda396b3a44778af5e830f

Cyper WP is best applied with a 1 gallon sprayer. Apply to outside foundation and all entry points such as around windows, doors, cracks and crevices, etc. Cyper WP is very toxic to fish. Do not apply near bodies of water or where there may be water run-off. Always read the label completely before use.

Fill applicator tank with the desired volume of water and add Surrender brand Cyper WP Insecticide. Close and agitate before use in order to ensure proper use suspension of the wettable powder. Shake and reagitate application equipment before use if application is interrupted. Make up only amount of treatment volume as required. Do not store dilution in application equipment overnight.

Cyper WP will continue to work for 90 days indoors and 30 days outdoors. We recommend waiting at least 7 days between applications.

Each 1 pound jar of Cyper WP makes 24-48 gallons of finished solution.

Standard Application Dilution rates / Mixing Ratios for CYPER WP:

*1 scoop (0.33 oz.)/gal. of water – 0.1% – maintenance, more frequent applications, foliar applications

* 2 scoops (0.66 oz.)/gal. of water – 0.2% -- clean-out, severe infestations, exterior applications which receive greater direct sunlight, scorpions

*For Perimeter Barrier Applications around Structures – Mix 1-2 scoops of Cyper WP in 1-5 gallons of water to cover 800-1600 square feet. Higher volumes may be needed for dense vegetation or landscaping materials.

*1 scoop is the equivalent of 0.33 oz., 9.5 gm., or 2 level tablespoons

Cyper WP is for use in the following areas:

For crack and crevice or spot treatment for residual and contact pest control in, on, or around buildings and structures and their immediate surroundings and on modes of transport. Permitted areas of use include, but are not limited to, industrial buildings, houses, apartment buildings, laboratories, buses, and nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (cargo and noncabin areas only), schools, nursing homes, hospitals (non-patient areas), restaurants, hotels, and food manufacturing, processing, and service establishments.

Authorized by the USDA for use in inedible product areas in Federally inspected meat, poultry, and egg processing plants.

Indoors-

Use 1-2 scoops of Cyper WP per gallon of water. See above for mixing instructions.

General Instructions:

Cockroaches, Crickets, Firebrats, Silverfish, Spiders, and Ticks: Apply as a coarse, low pressure spray to areas where these pests hide, such as baseboards, corners, storage areas, closets, around water pipes, doors and windows, attics and eaves, behind and under refrigerators, cabinets, sinks, furnaces, and stoves, the underside of shelves, drawers and similar areas. Pay particular attention to cracks and crevices; also see OUTDOOR USE.

Ants: Apply to any trails, around doors and windows, and other places where ants may be found. Refer to BARRIER TREATMENT directions to prevent infestation; also see OUTDOOR USE.

Bees and Wasps: Application to nests should be made late in the evening when insects are at rest. Thoroughly spray nest and entrance and surrounding areas where insects alight; also see OUTDOOR USE.

Boxelder Bugs, Centipedes, Earwigs, Elm Leaf Beetles, Millipedes, Pillbugs, and Sowbugs: Apply around doors and windows and other places where these pests may be found or where they may enter premises. Spray baseboards, storage areas and other locations. Refer to BARRIER TREATMENT directions to prevent infestation; also see OUTDOOR USE.

Outdoors-

Use 1-2 scoops of Cyper WP in 1-5 gallons of water per 800-1,600 square feet. See above for mixing instructions.

For control of ants, bees, biting flies, boxelder bugs, centipedes, cockroaches, crickets, earwigs, elm leaf beetles, firebrats, fleas, flies, millipedes, mosquitoes, pillbugs, silverfish, sowbugs, spiders, ticks, and wasps. Apply as a residual spray either by hand or power sprayer to surfaces of buildings, porches, screens, window frames, eaves, patios, residential lawns only such grass areas adjacent or around private homes, duplexes, townhouses, condominiums, house trailers, apartment complexes, carports, garages, fence lines, storage sheds, barns, and other residential and non-commercial structures, refuse dumps, garages and other areas where pests are found.

Barrier Treatments: To help prevent infestation of buildings, apply to a band of soil and vegetation 6 to 10 feet wide around and adjacent to the building. Also, treat the building foundation to a height of 2 to 3 feet where pests are active and may find entrance. Apply as a coarse spray to thoroughly and uniformly wet the band area, using 1 gallon of spray mix per 400 square feet.

Fire Ants (Mounds) - For individual fire ant mounds, apply Surrender brand Cyper WP Insecticide as a drench. Gently sprinkle (watering can) a total of one gallon over the surface of mounds up to 12 inches in diameter and two gals. for larger mounds. Thoroughly wet mound and surrounding area. Treat new mounds as they appear. Pressurized sprays may disturb the ants and cause migration. If possible, applications should be made on warm days after recent rainfall. All colonies in the vicinity should be treated, including those that have not yet constructed a mound.

Scorpions - Treat and remove accumulations of lumber, firewood and other materials which serve as harborage sites. Apply a coarse spray treatment to the point of drip.

Cyper WP Insecticide Features

• 1 lb. jar comes with convenient scoop for quick and easy measuring.
• 1 lb. jar is very economical.
• Pet safe after dry, when used as directed
• Wettable powder formulation is excellent for porous surfaces, such as concrete.

Extra Tips for Using Cyper WP

• Some settling may occur after tank mixing Cyper WP. Be sure to agitate the tank after resting, and only mix the amount of product you intend to use within 24 hours.
• Store concentrate out of direct sunlight and extreme temperatures for maximum shelf life of 3+ years.
• Not labeled for use on edible plants
• Exposure to direct sunlight will break down residual more quickly, so applications may need to be made more frequently in these areas.
• Cyper WP is not suitable as a space spray with equipment such as misters, foggers, or aerosol equipment. The product will clog or damage the equipment and is not labeled for this use.
   

Compare to: Demon WP, Cynoff WP

WARNING: This product can expose you to chemicals including crystalline silica which is known to the State of California to cause cancer.