Cyper WP Help - Questions and Answers

Cyper WP

Customer Q&A

Cyper WP

(264)

Free Shipping

Info / Buy Now

Ask Question

Asked by Barb

04/26/2018

Q

How large is the scoop for Cyper WP? I have misplaced it and the instructions.

A

1 scoop of Cyper WP = 0.33 oz. (9.5 gm.) which is equivalent to 2 level tablespoons. You will use 1-2 scoops per gallon of water. You can find the complete application instructions on the product label here.

Was this answer helpful to you? Yes No
Asked by Blanche from Winnsboro, Louisiana

04/05/2016

Q

How much of the Cyper WP do I use per gallon of water?
Dilution Ratio

A

Cyper WP does come with a scooper and you do use one or two level scoops per gallon. Most of the common pests require 1 scoop per gallon of water. If you are treating carpenter ants, carpenter bees, cockroaches, fire ants, scorpions, spiders, ticks or wasps, then you need to use 2.

Was this answer helpful to you? Yes No
Asked by Chris from Union Valley, Texas

07/18/2013

Q

I've been invaded by grasshoppers. How long is the residual of Cyper Wp?
incoming grasshopers.

A

Yes, Cyper Wp provides a residual of 30 days outdoors and 90 days indoors. You want to use one scoop per gallon of water.

Was this answer helpful to you? Yes No
Asked by Jean from 609 Chestnut St., Bellevue, Id 83313

04/20/2013

Q

No scoop included in our Cyper WP.
What size scoop should we have to use? We have searched through the powder with a gloved hand. We are treating for spiders, so need 2 scoops per gallon. What would be the equivalent in tsp. or Tablespoons? thank you!

A

We video tape every order as it is being packed for quality control. We went back and reviewed the video of your order being packed and can see that the order packer just placed the scoop into the large shipping box, it was not placed inside the Cyper WP tub. If you still have the shipping box you m…
Read Full Answer »
We video tape every order as it is being packed for quality control. We went back and reviewed the video of your order being packed and can see that the order packer just placed the scoop into the large shipping box, it was not placed inside the Cyper WP tub. If you still have the shipping box you may want to look inside and under the flaps for the scoop (it is made of a translucent plastic). If you have already tossed the box you can use this guide: 1 scoop is the equivalent to 2 level tablespoons so you will need to use 4 level tablespoons per gallon.

Was this answer helpful to you? Yes No

1 of 1 people found this answer helpful.
Asked by Rich

06/02/2011

Q

I lost my Cyper WP scoop. How much is in a scoop? Can I use a tablespoon?

A

1 scoop = 0.33 oz. (9.5 gm.) of Cyper WP which is equivalent to 2 level tablespoons.

Was this answer helpful to you? Yes No

8 of 9 people found this answer helpful.
Asked by Mike from Ewing, Nj

05/14/2012

Q

Can this product be used with a hose end sprayer?
I understand the instructions of use with a canister sprayer. Can this product be used with a hose end sprayer, i.e. Ortho Dial 'N Spray, to cover a larger area quickly? I was specifically thinking to use it the hose end sprayer to create the 6-10 foot barrier around house. I thought the powder could be per-mixed with some water in the sprayer's container, thereby making a concentrate. Is that a viable approach? What would the application rate per gallon need to be?

A

Cyper WP and other wettable powders are not generally great formulations to use in hose end sprayer because they can clog the sprayer and most hose end sprayers are not calibrated for use with wettable powders. Typically you would want to apply 1 gallon of diluted solution per 1000 square feet of y…
Read Full Answer »
Cyper WP and other wettable powders are not generally great formulations to use in hose end sprayer because they can clog the sprayer and most hose end sprayers are not calibrated for use with wettable powders. Typically you would want to apply 1 gallon of diluted solution per 1000 square feet of yard. Each gallon would have one scoop of Cyper WP. So, if your yard was 2000 square feet, you would place two scoops of Cyper WP in the hose end sprayer, then fill the hose end sprayer to the 2 gallon mark with water. This should apply one scoop per gallon of water over 1000 square feet.

Was this answer helpful to you? Yes No

3 of 8 people found this answer helpful.
Asked by Patricia

07/31/2009

Q

How many scoops of Cyper WP should be mixed per gallon of water?
Hi. This is my first time using Cyper WP and I have the one pound container. It came with a scooper, but the package does not state anywhere on how much to use. I am guessing that it is one scoop per gallon. But I do NOT want to guess, so that is why I am asking you how many scoops per gallon?

A

Each jar of Cyper WP comes with a full product label attached to the the jar. If you take a close look, you will see that you can peel off the label and there is a direction booklet attached. Cyper WP does come with a scooper and you do use one or two level scoops per gallon. Most of the common pest…
Read Full Answer »
Each jar of Cyper WP comes with a full product label attached to the the jar. If you take a close look, you will see that you can peel off the label and there is a direction booklet attached. Cyper WP does come with a scooper and you do use one or two level scoops per gallon. Most of the common pests require 1 scoop per gallon of water. If you are treating carpenter ants, carpenter bees, cockroaches, fire ants, scorpions, spiders, ticks or wasps, then you need to use 2 scoops per gallon of water.

Was this answer helpful to you? Yes No

88 of 91 people found this answer helpful.
Asked by Lenore from Waynesville, Nc

05/27/2021

Q

How many ounces is one scoop of Cyper WP? What is the recommended mix rate per gallon to treat for borer bees?

A

The mix rate for Cyper WP for maintenance, more frequent applications & foliar applications is 1 scoop (0.33 oz) per gallon of water. For treating bees outdoors, the product label states 1-2 scoops of Cyper WP  in 1-5 gallons of water per 800-1,600 square feet. See product label for more informa…
Read Full Answer »
The mix rate for Cyper WP for maintenance, more frequent applications & foliar applications is 1 scoop (0.33 oz) per gallon of water. For treating bees outdoors, the product label states 1-2 scoops of Cyper WP  in 1-5 gallons of water per 800-1,600 square feet. See product label for more information.

Was this answer helpful to you?   Yes No
Asked by John from Fl

06/27/2012

Q

I lost my Cyper WP scooper. How much does the scooper hold?

A

One Cyper WP scoop is 0.33 oz. (9.5 gm.) which is equivalent to 2 level tablespoons.

Was this answer helpful to you? Yes No

6 of 7 people found this answer helpful.
Asked by Linda

06/07/2011

Q

How many gallons of Cyper WP per 1 lb container at a 2 scoops per gallon concentrate?
Or did I miss this somewhere?

A

At a 2 scoop of product per gallon of water usage rate you will be able to make 24 gallons of diluted solution.

Was this answer helpful to you? Yes No

8 of 8 people found this answer helpful.