Dri - Carbon Soil Conditioner

Agricultural Usage:

Dri-Carbon can be applied in Fall or Spring. For best results, product should be applied in the Fall, following harvest, and may be blended or applied with dry products. This will allow Dri-Carbon ample time to disperse thoroughly in the soil structure prior to Spring. Alternately, Dri-Carbon may be applied in the Spring with dry products.

Turf, Commercial, and Lawn & Garden Usage:

Dri-Carbon can be applied in Fall or Spring. It may be applied prior to seeding or sodding new turf by applying to the soil surface prior to planting. It may also be applied to established turf and lawns. Dri-Carbon is best applied in the Fall after the last mowing, or in the Spring prior to green-up. Dri-Carbon can be used in gardens by applying to the soil prior to transplanting or direct seeding, or by applying to the soil around existing plants from the base to the edge of the drip line.

Application Rates

Apply at a rate of 8 to10 pounds per acre depending on soil type. Light, sandy soils may require heavier applications. Fertile, loam-type soils may require lighter applications. Dri-Carbon may be mixed with most granular applications or other dry products including animal manures. When applying as a mix with other granulated products, ensure even distribution by mixing thoroughly before application. For smaller areas, apply 1 pound per 4,356 square feet for standard applications and 2 pounds for heavier applications. Consult your local dealer for recommended rates for your particular region, soil type, and specific usage.