Eraser 41% Weed Killer Herbicide treated areas can be reseeded 2 weeks after the last application.
Eraser 41% Weed Killer Herbicide is mixed at 1.5 fl oz to 2.5 fl oz per gallon of water per 300 sq ft.
Per the product label, you should use 1.5 fl oz per gallon for annual weeds or seedling weeds and 2.5 fl oz per gallon of water for tougher weed control, perennials, brush and lawn renovations is recommended.
Eraser 41% Weed Killer Herbicide does not affect insects in the area but the animals could be finding more seeds and insects in the area as the grass/cover they had is killed off.
Please take a moment to view our Grub Inspection and Treatment Guide for more information on how to inspect for Grubs and an effective treatment.
Eraser 41% Weed Killer Herbicide will kill any plant or tree that you spray it on. It is non-selective, meaning it will affect anything it touches. If you have a large tree though, then you would have to use a large amount of it directly on the stump or get it in the trunk of the tree by drilling into it for it to die. Larger trees are not normally affected by overspray or by applying Eraser to other plants or grass nearby.
Eraser 41% Weed Killer Herbicide is a non selective herbicide so it will kill both weeds and turfgrass at the labeled rates. For most annual weeds, apply at the rate of 1 1/3 fl oz per gallon of water; use 2 2/3 oz to control tougher or hard to kill perennial weeds.
Any barespots in turfgrass can be reseeded after 2 weeks if needed. Please refer to the product label for complete application instructions.
Eraser 41% Weed Killer Herbicide can be reapplied in 7 days as needed. Most treated weeds usually show initial symptoms in 2-4 days and complete kill in 1-2 weeks. Hard-to control weeds may require a second application if not completely dead in 4 weeks.
How much Eraser 41% Weed Killer Herbicide you need for your 300 gallon tank will depend on what kind of plants you are targeting and how large of an area you are covering with that tank.
In general, you will use 1.5 oz. per gallon of water (per 300 sq ft) to control most annual weeds, and 2.5 oz. per gallon of water (per 300 sq ft) to control hard to kill perennial weeds. Please refer to the product label for complete application instructions.
The main difference between the two products is that the Eraser A/P has an agricultural label to allow you to use on or near labeled crops and edibles, where the Eraser 41% Weed Killer Herbicide does not have the agricultural label. Although they both have the same active ingredient, Glyphosate, and the same amount of the active ingredient, there are also inert ingredients that may affect whether a product can be used on or near edibles.
Yes, Eraser 41% Weed Killer Herbicide can be mixed with water to treat annual and perennial weeds, shrubs and vines or use undiluted for stump treatments. Please refer to the product label for more instructions.
Eraser 41% Weed Killer Herbicide is not labeled for use in pastures or rangeland and does not list huisache as a weed controlled.
Remedy Herbicide is labeled for suppression of huisache in pastures and rangeland. Refer to page 5 of the product label under the sections Low Volume Basal Bark Treatment & Streamline Basal Bark Treatment for application rates and more information.
We found 2 helpful articles by Texas A & M AgriLife Extension Office on Huisache Management & Chemical Weed and Brush Control Suggestions for Rangelands that provide addtional information and treatment methods.
Yes, Eraser 41% Weed Killer Herbicide consists of Glyphosate - 41%, which will kill any weed it is applied to.
Eraser 41% Weed Killer Herbicide is a non-selective that should kill any weed/grass that it comes in contact with, including poison ivy
