The Foamer Simpson 5.0 is a new and improved version of the Foamer Simpson 2 Gallon Pump Up Foamer (FSPU002). It is an economical foamer that produces an exceptional foam with a consistency similar to shaving cream. It can also produce different consistencies with its adjustable air mix. With a wide stability base, it won't tip over when placed on surfaces. It is ideal for use with InVade Bio Foam and other foaming products. Foamer Simpson also features a 17-inch wand that can be used to both spray surfaces and foam drains. Equipped with a pressure relief valve for a safer spray and foam application.
Includes tank collar with clips for vertical wand storage
Natural tank color
Product level fill markings in gallons and liters
Perfect to use with InVade Bio Foam and other foaming products.
HOW TO USE:
Remove all components from the packaging. Attach the extension wand to the trigger handle.
Securely hold the tank and unscrew the pump assembly (blue handle) from the tank.
For the best quality foam, do not fill the foamer to more than 1 gallon. Since air is required to make the foam as well as for pressurizing the foamer, the extra headspace is necessary.
Fill the foamer to the desired level with water, then add the InVade Bio Foam (1 oz per quart or 4 oz per gallon), or OutLAST Pro Foaming Agent followed by the chemical you are foaming, per label directions.
Swirl the foamer to mix, but do NOT shake.
Pressurize the tank by pumping up the unit to the desired pressure or until the pressure release valve begins to leak air.
Once the desired pressure has been achieved, push the pump handle down and twist it clockwise to lock it in place. You are now ready to start foaming.
While InVade Bio Foam and OutLAST Pro are not corrosive, it is a good idea to clean the foamer regularly with fresh water to extend its life.
If using other products in the foamer, make sure they are compatible with plastic parts.
Always depressurize the foamer using the green relief valve on the side (until the red part of the stem is visible) after use and prior to removing the pump. Beware of spray.
It is important to keep adequate pressure in the tank to maintain foam consistency.
It may be necessary to clean, and periodically replace the white foam insert in the nozzle to maintain foam quality after multiple uses.