GrazonNext HL Herbicide - Questions & Answers

Displaying 31 to 40 (of 112 questions)
  • Asked by Dean from Mouth Of Wilson
    07/13/2019
    Q
    Will GrazonNext HL Herbicide kill clover?
    A

    Yes, GrazonNext HL Herbicide can be used for clover.  

    Was this answer helpful to you?   Yes No
    10 of 13 people found this answer helpful.
  • Asked by Jerry from Britsh Columbia Canada
    06/27/2019
    Q
    Will GrazonNext HL Herbicide kill clover?
    A

    GrazonNext HL Herbicide is labeled to treat clover in fields. Please see the product label for appropriate application rates. 

    Was this answer helpful to you?   Yes No
    13 of 34 people found this answer helpful.
  • Asked by Bj
    05/23/2021
    Q
    How much GrazonNext HL Herbicide to a 40 gallon tank of water?
    A

    You will mix the GrazonNext HL Herbicide at 1.5 pints (24 oz) per 40 gallons of water per acre. For tough to control weeds you may use up to 2.1 pints (34 oz) per acre. Please review the product label for more information. 

    Was this answer helpful to you?   Yes No
    4 of 5 people found this answer helpful.
  • Asked by Jb from Oklahoma
    08/05/2019
    Q
    I have a 25 gallon sprayer tank. How much Grazon should I use in order to kill thistle and blackberry?
    A

    The rate at which you apply GrazonNext HL Herbicide will depend on the specific type of thistle you are treating. If you are treating yellow starthistle, bull thistle, musk thistle, or plumeless thistle, then you can use 1.2 - 1.5 pints per Acre, which would be 0.44 - 0.5 oz per 1,000 square feet. For sowthistle, prickly sowthistle, Canada thistle, or scotch thistle, you would use 1.5 - 2.1 pints per Acre(this is the same for blackberry), or 0.5 - 0.78 oz per 1000 sq ft. For spot treating with a 1-2 gallon sprayer, you would use the 1,000 sq ft rate in 1 gallon of water. For larger areas, the exact amount of water needed with depend upon your spray equipment and at what speed the product is applied. Please refer to the product label for complete application instructions.

    Was this answer helpful to you?   Yes No
    7 of 22 people found this answer helpful.
  • Asked by David
    04/05/2018
    Q
    What rate of surfactant should i use with Grazon Next HL
    A

    Per the product label for GrazonNext HL Herbicide: Addition of Surfactants or Adjuvants on All Labled Use Sites: The addition of a high quality non-ionic surfactant (of at least 80% active ingredient) at 0.25 to 0.5 % volume per volume (1 to 2 quarts per 100 gallons of spray) is recommended.

    Was this answer helpful to you?   Yes No
    87 of 107 people found this answer helpful.
  • Asked by Scott from Chapel Hill,tn
    03/19/2023
    Q
    Is Grazon better than 2-4Dto eliminate clover?
    A
    GrazonNext HL Herbicide is labeled to treat clover and has 2-4D as an active ingredient. Please see the product label for appropriate application rates. 
    Was this answer helpful to you?   Yes No
  • Asked by Larry from Barnesville
    07/01/2018
    Q
    Can I use GrazonNext to kill horsenettle without killing clover?
    A

    GrazonNext HL Herbicide will kill sweet and white clover as well as horsenettle.  It would not selectively kill the nettle and not the clover.

    Was this answer helpful to you?   Yes No
    4 of 5 people found this answer helpful.
  • Asked by Mark from Nc
    04/28/2019
    Q
    How soon can I square bale my hay fields after spraying Grazonnext ?
    I square bale roughly 4000 bales per year
    A

    Per the product label for GrazonNext HL Herbicide: Do not harvest forage for hay within 7 days of GrazonNext HL application. Cutting hay too soon after spraying weeds can compromise the weed control. Wait 14 days prior to cutting grass hay to allow for maximum herbicide activity

    Also please be aware of the following restrictions:

    Do not use grasses treated with GrazonNext HL in the preceding 18-months for hay intended for export outside the United States.

    Hay from areas treated with GrazonNext HL in the preceding 18-months CANNOT be distributed or made available for sale off the farm or ranch where harvested unless allowed by supplemental labeling.

    Hay from areas treated with GrazonNext HL in the preceding 18-months CANNOT be used for silage, haylage, baylage and green chop unless allowed by supplemental labeling.

    Do not move hay made from grass treated with GrazonNext HL within the preceding 18-months off farm unless allowed by supplemental labeling.

    Do not use hay or straw from areas treated with GrazonNext HL within the preceding 18-months or manure from animals feeding on hay treated with GrazonNext HL in compost.

    Do not use grasses treated with GrazonNext HL in the preceding 18-months for seed production.

    Was this answer helpful to you?   Yes No
    11 of 18 people found this answer helpful.
  • Asked by C. from Burleson, Tx
    04/08/2018
    Q
    What is the mix rate and application instructions to apply GrazonNext HL Herbicide to 5 acres using a 4 gallon boomsprayer?
    I've read the label on my grazon HL and I simply don't understand the mixing ratio or technique. Can I pour the grazon into the tank or do I premix it in 3 gl of water. Please give me direction on how to apply
    A

    Without knowing the specific weeds you are targeting, we are unable to give an exact mix rate. GrazonNext HL Herbicide is applied at 19-34 fl oz per acre (43,560 sq ft). The amount of water will depend on how much water it takes to cover 1,000 sq ft thoroughly. Typically 1-2 gallons of water every 1,000 sq ft is sufficent, the label is recommending to use 3 gallons of water every 1000 sq ft to ensure the active ingredient in  GrazonNext gets into the soil. Please see the break down below. 

    To treat each of the 5 acres, you would need 130 gallons of water for each acre. ** 1 acre = 130 gallons of water (3 gal of water x 43,560 sq ft (sq ft in acre)  

    You would need to refill your sprayer approx 3 times to thoroughly treat 1 acre. 

    Depending on what weeds you are targeting, you will divide the 19 fl oz, 24 fl oz or 34 fl oz mix rate per acre and divide by 3 (the # of times you will fill the 40 gal sprayer) . 

    Low Rate 19 fl oz / 3 tank fills = 6.3 fl oz per tank

    Mid Rate 24 fl oz / 3 tank fills = 8 fl oz per tank

    High Rate 34 fl oz / 3 tank fills + 11.3 fl oz per tank 

    You can mix the GrazonNext directly into the tank. To prepare the spray, add about half the required amount of water in the spray tank. Then, with agitation, add the specified amount of GrazonNext HL and other registered tank mix herbicides. Finally, with continued agitation, add the rest of the water and additives such as surfactants or drift control and deposition aids.

    GrazonNext HL Herbicide is a post-emergent herbicide so it can be used any time the weeds are in an actively growing state. If the weeds are apparent now, then you can use the product now to try and eliminate them. The rate range for GrazonNext HL Herbicide is 1.2 to 1.5 pints (19 to 24 fluid oz) product per acre. Please provide details on your application for specific information.

    Was this answer helpful to you?   Yes No
    473 of 1065 people found this answer helpful.
  • Asked by Michael from Ocala
    03/14/2021
    Q
    What is the application/mix ratio of GrazonNext to treat 10 acres using a15 gal atv sprayer?
    A

    The use rate for GrazonNext HL per acre varies by target plant species and use area. For general applications you can use around 19 oz per acre, and can do no more than 2 broadcast applications per year. This will be typically be applied at around 45 gallons of water per acre. For more specific use instructions you can reference the Product Label

    Was this answer helpful to you?   Yes No
Displaying 31 to 40 (of 112 questions)