It is best not to mow for 2 days before or after applying Hi-Yield 2,4-D Selective Weed Killer.
Per the Hi-Yield 2,4-D Selective Weed Killer product label, for treating pennywort or other aquatic weeds: Use 1 gallon of this product in 25 gallons of water per acre. Uniform coverage is essential. Avoid submerging plants after treatment. Application should be made when leaves are fully developed above water line and plants are actively growing. Treatment of aquatic weeds can result in oxygen loss, so only treat 1/2 to 1/3 of the area at a time, and wait at least 21 days between applications in order to avoid fish suffocation.
If Hi-Yield 2, 4-D Selective Weed Killer is applied in the spring, you can reseed in the fall ( if application is in the fall, you can reseed in the spring).
Hi-Yield 2, 4-D Selective Weed Killer does not have any retrictions on when you can sod after or before application. You should be able to put the sod down now as the weed control in this is a post-emergent only, so you won't have to worry about disturbing any barriers created in the soil by a pre-emergent.
Hi-Yield 2, 4-D Selective Weed Killer states on the product label do not use on freshly seeded turf until grass is well established. This is typically after 2 mowings. Reseeding of lawns should be delayed following treatment. With Spring application, reseed in the Fall. With Fall application, reseed in Spring.
Hi-Yield 2, 4-D Selective Weed Killer is applied to lawns and other listed areas for control of listed broadleaf weeds. It is not recommended to apply to desired ornamentals etc. Please refer to the product label for complete mixing and application instructions.
Monterey Spray Tank Cleaner will help to prolong the life of your spraying equipment and help you to avoid dangerous chemical mixing and cross contamination. The rate is 1 1/2 tablespoons to 2 gallons of water.
It is recommended that you keep livestock off the pasture even with spot treating.
Hi-Yield 2, 4-D Selective Weed Killer cannot be used on sweet corn. The only herbicide we are aware of that can be used on sweet corn is Scythe and even this product has very limited use around sweet corn.
Hi-Yield 2, 4-D Selective Weed Killer is labeled to kill clover, so it would not be advised to use in a clover food plot for eradicating listed broadleaf weeds. This product can be used in established grassy pastures and ranges.
The Hi-Yield 2, 4-D Selective Weed Killer product label does not state that bahia grass is tolerant, so we cannot recommend that you use it on this grass species.
Per the product label for Hi-Yield 2, 4-D Selective Weed Killer: "Reseeding of lawns should be delayed following treatment. With Spring application, reseed in the Fall. With Fall application, reseed in Spring. You may also consult your local cooperative extension office for advice on the best timing for application and reseeding in your specific area.
Yes, Hi-Yield 2, 4-D Selective Weed Killer is labeled for creeping charlie/ground ivy. A fertilizer can be applied at the same time.
Hi-Yield 2, 4-D Selective Weed Killer is labeled for boat applications at the rate of 1 gallon of product to 25 gallons of water per acre. During the growing season, weeds decompose in a 2 to 3 week period following treatment. Begin treatment along the shore and proceed outwards in bands to allow fish to move into untreated areas. Waters having limited and less dense weed infestations may not require partial treatments.Uniform coverage is essential. Avoid submerging plants after treatment. Application should be made when leaves are fully developed above water line and plants are actively growing. Treatment of aquatic weeds can result in oxygen loss from decomposition of dead weeds. This loss can cause fish suffocation. Therefore, to minimize this hazard, treat 1/3 to 1/2 of the water area in a single operation and wait at least 21 days between treatments. Begin treatments along the shore and proceed outwards in bands to allow fish to move into untreated areas. The maximum rate per broadcast application is 4.7 gallons per surface acre, limited to applications is 2 per year. Do not make a broadcast application within 21 days of previous broadcast application. Spot treatments are permitted.
Hi-Yield 2, 4-D Selective Weed Killer can take up to two weeks for complete burn down depending on type of mix rate and application.
Hi-Yield 2, 4-D Selective Weed Killer is not safe to use on sensitive grass such as St. Augustine. We would recommend using Fertilome Weed-Out Lawn Weed Killer with Trimec which is labeled for Virginia Buttonwood and can be applied to St. Augustine Grass.
Hi-Yield 2, 4-D Selective Weed Killer should be applied when you are not expecting any rainfall for at least 24 hrs.
The mixing ratios for Hi-Yield 2,4-D? will vary according to where you are treating and what you are treating for. According to the Hi-Yield 2, 4-D Selective Weed Killer product label: In pastures and range land: Use 3 to 4 oz. in 1 to 3 gallons of water per 1,000 sq. ft. On Ornamental Turf: Use 16 oz. in 1 to 8 gallons of water per 2,725 sq. ft. or 2 gallons in 15 to 50 gallons per acre. Please review the product label for complete usage instructions.
Hi-Yield 2, 4-D Selective Weed Killer does not list on the product label that it is safe for use around edibles, only in non-crop areas. The Avenger Weed Killer Concentrate is safe for use around edible vegetation and fruit trees as it does not persist in the soil and is approved for organic gardening. Be sure to not spray any of the plants you do not want to kill as it is non-selective and will kill anything to which it is applied.
Hi-Yield 2, 4-D Selective Weed Killer is labeled for controlling hemp but is not for use on corn. We recommend consulting your local Dept of Ag or Cooperative Extension for assistance with finding a product appropriate for your needs.
Hi-Yield 2, 4-D Selective Weed Killer is not really labeled for brush and vines. A better option would be Crossbow Specialty Herbicide - 2, 4-D & Triclopyr.
