Hi - Yield 2, 4 - D Selective Weed Killer - Questions & Answers

Displaying 81 to 100 (of 331 questions)
Sort:
  • Asked by Gerald
    01/28/2018
    Q
    Is Hi Yield 2, 4-D Selective Weed Killer pet friendly?
    A

    You will need to keep all pets and children out of the area while you treat using Hi-Yled 2,4-D Selective Weed Killer and until all plant surfaces have dried completely (1-2 hours at most), Once dry it is completely safe for pets to return to the yard and resume normal activity. 

    Was this answer helpful to you?   Yes No
    8 of 9 people found this answer helpful.
  • Asked by Roxan from Horseshoe Bend Idaho
    04/19/2017
    Q
    What is the mixture of Hi-Yield 2, 4-D Selective Weed Killer about for a 24 ounce spray bottle
    A

    You would want to dilute Hi-Yield 2, 4-D Selective Weed Killer down to approx. .8oz per 24oz of water.
     

    Was this answer helpful to you?   Yes No
    8 of 8 people found this answer helpful.
  • Asked by Patty from Long Prairie ,mn
    06/27/2015
    Q
    I want to treat my lawn for plantain weeds I have a 15 gallon pull behind sprayer what is ratio for 24d high
    I have mostly kentucky blue grass
    A
    You will use 2 gallons of 2,4-D Selective Weed Killer in 15 to 50 gallons of water per acre or
    Use 16 oz. in 1 to 8 gallons of water per 2,725 sq. ft. The amount of product is what is important when you are using a product like this. Water is only used as a carrier.
    Was this answer helpful to you?   Yes No
    8 of 8 people found this answer helpful.
  • Asked by Kathy from Whitehall
    05/04/2017
    Q
    How much Hi-Yield 2,4-D would I use in a 30-gallon sprayer?
    A

    The mixing ratios for Hi-Yield 2,4-D will vary according to where you are treating and what you are treating for. According to the product label: For spot treatment in non-crop areas: Use 1 pint in 3 gallons of water or 4 oz. in 3/4 gallon in a hand sprayer. In pastures and range land: Use 3 to 4 oz. in 1 to 3 gallons of water per 1,000 sq. ft. On Ornamental Turf: Use 16 oz. in 1 to 8 gallons of water per 2,725 sq. ft. or 2 gallons in 15 to 50 gallons per acre. Please review the product label for complete usage instructions.

    Was this answer helpful to you?   Yes No
    8 of 52 people found this answer helpful.
  • Asked by Andy from Clarksville, Tn
    04/29/2016
    Q
    After how long is Hi-Yield 2,4-D rainfast?
    It may rain tonight. It is 11:09 now and I want to apply it in 30 minutes and I was wanting the answer to make my decision.
    A

    In general you want to apply Hi-Yield 2, 4-D Selective Weed Killer when rain is not expected within 24 hours of application,

    Was this answer helpful to you?   Yes No
    8 of 10 people found this answer helpful.
  • Asked by Lamar from Winder
    07/30/2017
    Q
    Will Hi-Yield 2, 4-D Selective Weed Killer kill crabgrass?
    A

    Hi-Yield 2, 4-D Selective Weed Killer is not labeled to treat for Crabgrass. Depending on what type of turf grass you have, we recommend to Drive for Crabgrass control.

    Was this answer helpful to you?   Yes No
    8 of 9 people found this answer helpful.
  • Asked by Terry from Noble Ok
    05/08/2015
    Q
    How many gallons of Hi-Yield 2, 4-D Selective Weed Killer do I need to treat 80 acres?
    A
    You would use 1 gallon of Hi-Yield 2, 4-D Selective Weed Killer in 15 gallons of water per acre. 
    Was this answer helpful to you?   Yes No
    8 of 12 people found this answer helpful.
  • Asked by Brook from Paris Il
    05/14/2015
    Q
    I want to kill weeds in warm season native grass. When using a 2 gallon sprayer, how much Hi-Yield 2, 4-D Selective Weed Killer per gallon?
    A
    Hi-Yield 2, 4-D Selective Weed Killer can be applied to established listed turfs only.
    The mixing ratios will vary according to where you are treating and what you are treating for. According to the Hi-Yield 2, 4-D Selective Weed Killer product label: For Spot treatment in non-crop areas: Use 1 pint in 3 gallons of water or 4 oz. in 3/4 gallon in a hand sprayer. In pastures and range land: Use 3 to 4 oz. in 1 to 3 gallons of water per 1,000 sq. ft. On Ornamental Turf: Use 16 oz. in 1 to 8 gallons of water per 2,725 sq. ft. or 2 gallons in 15 to 50 gallons per acre. Please review the product label for complete usage instructions.
    Was this answer helpful to you?   Yes No
    8 of 12 people found this answer helpful.
  • Asked by Linda from Dawson, Il
    08/05/2014
    Q
    Use of Hi-Yield 2,4-D
    Desire: 1. To spray around shrubs. 2. Kill poison ivy n flower bed by painting leaf with brush. 3. To kill weeds under large trees.4. To kill wild grape vines. I've just heard of your product and I am excited to use it! I've adapted a cylindrical device at the end of my sprayers, to limit coverage of spray pattern n stop drift. Will spray penetrate the ground around shrubs and harm shrubs? How long does your weed killer last? Do you have a weed killer and pre-emergent combo spray? If not, do know of one? Thank you.
    A

    Hi-Yield 2, 4D Selective Weed Killer is labeled for use on lawns, around ponds, drainage ditchbanks, pastures and rangelands. It should not be used on shrubs. It should not penetrate the ground and kill the shrubs. It should last for the entire season but if not, another application can be made after 30 days.

    For a pre-emergence and post-emergent combination, we would recommend using Dimension 2EW. You will use .33 - .73 fl. oz. per 1,000 sq. ft. Please let us know if you have any additional questions.

    Was this answer helpful to you?   Yes No
    8 of 11 people found this answer helpful.
  • Asked by Ricky from El Dorado
    03/16/2016
    Q
    Is Hi-Yield 2, 4-D Selective Weed Killer safe to use around gardens?
    A

    Hi-Yield 2, 4-D Selective Weed Killer does not list on the product label that it is safe for use around edibles, only in non-crop areas.  The Avenger Weed Killer Concentrate is safe for use around edible vegetation and fruit trees as it does not persist in the soil and is approved for organic gardening.  Be sure to not spray any of the plants you do not want to kill as it is non-selective and will kill anything to which it is applied.

    Was this answer helpful to you?   Yes No
    8 of 11 people found this answer helpful.
  • Asked by Ed from Bray, Ok
    03/15/2017
    Q
    How much Hi-Yield 2, 4-D Selective Weed Killer would I use in a 25 gallon tank?
    A

    The mixing ratios for Hi Yield 2,4-D will vary according to where you are treating and what you are treating for. According to the product label: For spot treatment in non-crop areas, use 1 pint in 3 gallons of water or 4 oz. in 3/4 gallon in a hand sprayer.  In pastures and range land, use 3 to 4 oz. in 1 to 3 gallons of water per 1,000 sq. ft. On ornamental turf, use 16 oz. in 1 to 8 gallons of water per 2,725 sq. ft. or 2 gallons in 15 to 50 gallons per acre. Please review the product label for complete usage instructions.

    Was this answer helpful to you?   Yes No
    7 of 14 people found this answer helpful.
  • Asked by Victor from Loris, Sc
    03/05/2017
    Q
    When is best time to apply Hi-Yield 2, 4-D Selective Weed Killer?
    A

    Hi-Yield 2, 4-D Selective Weed Killer can be used anytime your weeds are actively growing.

    Was this answer helpful to you?   Yes No
    7 of 8 people found this answer helpful.
  • Asked by Ott from Katy, Tx
    02/22/2018
    Q
    Is Hi-Yield 2, 4-D Selective Weed Killer safe to use on Bermuda grass for spot treatment or broadcast?
    A

    Hi-Yield 2, 4-D Selective Weed Killer is safe to use on established Bermuda for broadleaf weeds.  It can be used as either a spot or broadcast treatment as directed on the product label.

    Was this answer helpful to you?   Yes No
    7 of 7 people found this answer helpful.
  • Asked by Marcos
    05/12/2014
    Q
    What type of grass is it safe to use Hi-Yield 2, 4-D Selective Weed Killer and what rate for 1gal of water?
    A

    Hi-Yield 2, 4-D Selective Weed Killer  can be applied to established lawns, ornamental turf, drainage ditchbanks, pastures, rangelands, non-crop areas, ponds, golf courses, cemeteries, parks, and other grassy areas. It is not safe to be used on sensitive grasses such as Zoysia, Centipede and St. Augustine.

    For Spot treatment in non-crop areas: Use 1 pint in 3 gallons of water or 4 oz. in 3/4 gallon in a hand sprayer. In pastures and rangeland: Use 3 to 4 oz. in 1 to 3 gallons of water per 1,000 sq. ft. On Ornamental Turf: Use 16 oz. in 1 to 8 gallons of water per 2,725 sq. ft. or 2 gallons in 15 to 50 gallons per acre. DO NOT apply at wind speed greater than 15 mph or temperatures above 90 degrees F. See product label for complete application instructions.
    Was this answer helpful to you?   Yes No
    7 of 10 people found this answer helpful.
  • Asked by Michele from Augusta,ga
    04/24/2014
    Q
    can I use this product around my trees,where the bulk of wild onions are?
    My entire backyard has tree roots under soil. I want to plant grass but need to kill onions 1st. Need I say this is a shaded yard.
    A
    Hi-Yield 2, 4-D Selective Weed Killer can be applied to kill wild onions. You wan to make sure to apply when there is no wind to lessen the possibility of drift on the trees.
    Was this answer helpful to you?   Yes No
    7 of 8 people found this answer helpful.
  • Asked by Jacie from Beaver, Ut
    04/25/2019
    Q
    When is it ok for Chickens to go where 2, 4-D was sprayed?
    A

    If you are applying Hi-Yield 2, 4-D Selective Weed Killer in an area where animals will graze, then you would need to wait a minimum of 30 days after application before allowing animals back into the treated area.  If you are applying in a non-grazing area, they would need to be kept out of the area while spraying and until the product dries completely. 

    Was this answer helpful to you?   Yes No
    7 of 11 people found this answer helpful.
  • Asked by Barrett from Kentwood Louisiana
    04/09/2014
    Q
    To kill clover and dollar weed do I mix 4 oz. per 1 gallon of water
    A
    Correct, you want to mix 4 oz. Hi-Yield 2, 4-D Selective Weed Killer per 1 gallon of water to treat for clover and dollarweed.
    Was this answer helpful to you?   Yes No
    7 of 9 people found this answer helpful.
  • Asked by David from Hampton, Ga
    04/08/2018
    Q
    Can fertilizer be mixed into 2,4-d solution for 1 step application?
    A

     

    You can apply a fertilizer at any time after applying Hi-Yield 2,4-D.  If the fertilizer needs to be watered in, you will need to wait 24 hours to allow the 2,4-D to fully dry before applying the fertilizer. 

     

    Was this answer helpful to you?   Yes No
    7 of 7 people found this answer helpful.
  • Asked by Ruth from Brunswick, Ga
    06/27/2017
    Q
    Can I spray weeds with 2,4-D right after it has rained before the grass is dry?
    A

    You can apply Hi-Yield 2, 4-D Selective Weed Killer to the grass directly after it has rained, however the product may not stick to the grass as well. If you add a surfactant you may get better results.  This product will still work, however it may not work as fast, or you may need to treat again.  For optimum results it is best to apply it once the grass has dried.

    Was this answer helpful to you?   Yes No
    7 of 7 people found this answer helpful.
  • Asked by Brandi from Blanchard Ok
    03/23/2012
    Q
    How much does the quart size of Hi-Yield 2, 4-D Weed Killer cover, I have 2 acres?
    A
    One quart Hi-Yield 2, 4-D Selective Weed Killer yields 6 gallons for spot treatment or treats 5,450 sq. ft. of turf area. 1 gallon treats up to 1/2 acre of ornamental turf area.
    Was this answer helpful to you?   Yes No
    7 of 8 people found this answer helpful.
Displaying 81 to 100 (of 331 questions)