Hi-Yield Atrazine Weed Killer is not labeled safe for Bahia grass.
Hi-Yield Atrazine Weed Killer should only be applied to established Centipede and St Augustine turf for targeting listed weeds as directed on the label only.
Hi-Yield Atrazine Weed Killer is mixed at 8.8 oz. per 2 gallons on water per 1,000 sq. ft so a quart will treat 3,720 sq. ft. You will need 3 quarts to treat 10,000 sq. ft (8 qts for 28,000 sq ft). Please keep in mind that this product can only be applied to St. Augustine or Centipede grasses.
Hi-Yield Atrazine Weed Killer does not list Creeping Beggarweed on it's label. We would recommend using Blindside Herbicide instead.
Hi-Yield Atrazine Weed Killer is best applied to a dry lawn but a slight amount of dew is okay as long as not dripping wet.
Hi-Yield Atrazine Weed Killer is not labeled to control spear grass. Unfortunately there is not much information on how to control this grass. You may either consider spot treating with a non-selective such as Roundup QuikPRO - 5 x 1.5 oz. packs or double checking with your extension office to see if they know of anything else that may work
Hi-Yield Atrazine Weed Killer should not be applied near, on or around ornamental plants and flower beds. It should only be applied as directed to actively growing weeds in established Centipede and St. Augustine lawns.
Hi-Yield Atrazine Weed Killeris only labeled for St. Augustine and Centipede lawns. Depending on what weeds you are targeting, Speedzone would work for broadleaf control on Bermuda turf.
There is no action required after an application of Hi-Yield Atrazine Weed Killer. You should allow 10-14 days for plants to show signs of dying. According to the product label: Rain or water within 2 or 3 days of application may decrease the effectiveness on emerged weeds. However, for the control of weeds from seeds, rainfall or watering is necessary within 7 to 10 days after treatme
The best time to treat with Hi-Yield Atrazine Weed Killer depends on if you are using a pre-emergent or post emergent application. For post emergent control it is best applied when weeds first start to emerge and are young. For pre-emergent it needs to be applied before target weeds geminate.. You may contact your local cooperative extension office to determine the correct timing of the application as this will vary greatly from region to region.
Products that contain 2,4-D provided the most effective control of rush.Hi-Yield 2, 4-D Selective Weed Killer would be a better alternative to treat for rush. Please review the product label for more application rates and instructions.
Yes, you can spot treat the chamberbitter with Hi-Yield Atrazine Weed Killer after applying the Prodiamine.
There are different usage rates for different applications. Here is the product label instructions for you to review to find the correct usage rate for your needs of the Hi-Yield Atrazine Weed Killer.
Do not replant treated areas (except with listed turfgrass) within 12 months after treatment of Hi-Yield Atrazine Weed Killer or injury may result. Do not overseed turf areas within 6 months after treatment. Sprigging of listed turfgrass is allowed in treated areas, some yellowing or stunting may occur
Hi-Yield Atrazine Weed Killer can be applied after 1 week.
Hi-Yield Atrazine Weed Killer is not labeled to control deadnettle. You can consider using something like Avenue South that is labeled for deadnettle and safe for St Augustine and Centipede.
Hi-Yield Atrazine Weed Killer is not labeled to treat doveweed, BlindSide is a very effective post-emergent herbicide that will kill existing doveweed in certain grasses.
Yes, Hi-Yield Atrazine Weed Killer is labeled to control moneywort, which is another name for creeping jenny. Please refer to the product label for more information.