We want to be clear that Bermuda can be suppressed, but it is VERY difficult to kill completely. It will take multiple treatments to finally kill it. HI-YIELD Turflon Ester Ultra herbicide could be used to do so. Per the product label, the application rate is 3/4 fl. oz. of product per gallon of water for Fescue lawns. You will likely have to do multiple applications to gain full control of the Bermuda grass. Applications can be done every 3-4 weeks.
Hi-Yield Triclopyr Ester is best applied to well established fescue. This is usually after it has been mowed at least twice. Be aware this product is not labeled to be used on residential lawns though.
Hi-Yield Triclopyr Ester is not safe for use on bermuda. It is actually used to control berrmuda in certain turf types.
It can take about two weeks to start to see results after applying Hi-Yield Triclopyr Ester. You may need to make a second application after four weeks depending on what weeds you are treating. Please refer to the product label for complete application instructions.
It can take about two weeks to start to see results after applying Hi-Yield Triclopyr Ester. You may need to make a second application after four weeks depending on what weeds you are treating. Please refer to the product label for complete application instructions.
Hi-Yield Triclopyr Ester is best applied when the plants and ground are dry. The moisture will lessen the effectiveness of the product.
You can add a surfactant to Hi-Yield Triclopyr Ester to help minimize drift and improve coverage on hard-to-control plants. Be sure that you are not spraying this product on turfgrass which are known to be sensitive, such as centipede or St. Augustine. Please refer to the product label for complete application instructions.
Hi-Yield Triclopyr Ester should be used only on well-established turfgrasses. This is usually after at least 4 weeks or the second mowing, whichever is longer. Per the product label: While established grasses are tolerant to this product, newly seeded grasses may be injured until well established (as indicated by vigorous growth, tillering and the development of a secondary root system). Do not reseed treated areas for a minimum of three weeks after treatment.
No, Hi-Yield Triclopyr Ester cannot be used on St Augustine grass.
According to the Hi-Yield Triclopyr Ester product label, it is a herbicide used to control unwanted annual and perennial broadleaf weeds on perennial bluegrass, perennial ryegrass, and tall fescue ornamental turf (including sod farms, commercial turf, and golf courses). The label also states Hi-Yield Triclopyr Ester may injure certain turfgrass species. Do not apply to Bahiagrass, Bentgrass, Bermudagrass, Centipedegrass, St. Augustine grass, or Zoysiagrass, unless turf injury can be tolerated.
You will use 1 tbsp. of Hi-Yield Turflon Ester per 1 gal. of water to treat 1,000 sq. ft.
Hi-Yield Triclopyr Ester would not leach into the soil and harm other plants, but it would be recommended to avoid contacting desirable plants with drift or overspray.
Hi-Yield Triclopyr Ester could dmamge nearby desirable trees or plants if it were to contact them or the root system. We would not recommend applying this product at or near the dripline of any desirable trees/plants.
Hi-Yield Triclopyr Ester and Metsulfuron 60 DF are applied to turfgrass only and are not labeled for removal of palmetto on plants.
It can take about two weeks to start to see results after applying Hi-Yield Triclopyr Ester. You may need to make a second application after four weeks depending on what weeds you are treating. Please refer to the product label for complete application instructions.
Hi-Yield Triclopyr Ester is not labeled for cut stump applications. But Remedy Ultra Herbicide is a similar product that is labeled for this use. Cut Stump: 20 to 30 gallons with oil to make 100 gallons and Spray the Root Collar area, Sides of the Stump, and the Outer Portion of the Cut Surface, until fully wet. You will use basic safety supplies when applying Nitrile gloves, boots, and safety glasses.
It is best to apply herbicides like Hi-Yield Triclopyr Ester with a hand pump or backpack sprayer, rather than with a hose-end sprayer to ensure the most accurate application. You will use 3/8 - 3/4 oz. (2.25-4.5 teaspoons) per gallon of water per 1,000 sq. ft. For specific application instructions, please refer to the product label.
There should be no issue tank mixing Hi-Yield Triclopyr Ester with a plant growth regulator as long as the instructions on each label are followed. Refer to the product labels of tank mix products and follow all appropriate use directions, precautions, and limitations.
Hi-Yield Triclopyr Ester is labeled for use on tall fescue only.
The application rate for Hi-Yield Triclopyr Ester will vary depending on where and what you will be treating. Please refer to the product label for specific application instructions.
