Origin Point Brands Barrier Gate - Questions & Answers

Displaying 1 to 20 (of 26 questions)
Sort:
  • Asked by Jennifer from Atlanta, Ga
    08/12/2016
    Q
    Is the Origin Point Brands Barrier Gate made of wood?
    How are they adjusted for a driveway opening?
    A

    The Origin Point Brands Barrier Gate is actually made of powder coated steel. It would adjusted by pulling out the top pole which extends from 5-12 feet in length. 

    Was this answer helpful to you?   Yes No
    26 of 27 people found this answer helpful.
  • Asked by Samantha from North Richland Hills
    03/09/2017
    Q
    What kind of post do you need for the Origin Point Brands Barrier Gate?
    A

    The Origin Point Brands Barrier Gate can be attached to a post sized 8 ft. 6 x 6 in. or 4 x 4 in.

    Was this answer helpful to you?   Yes No
    24 of 27 people found this answer helpful.
  • Asked by Ann
    07/05/2018
    Q
    Which direction does the Origin Point Brands Barrier Gate open and close?
    Can it adjust to only one direction?
    A

    The Origin Point Brands Barrier Gate opens from side to side, at 180 degree angles. It is mounted with hinges that allow it to swing both ways so unfotunately, it can't be adjusted to only open in one direction.

    Was this answer helpful to you?   Yes No
    18 of 18 people found this answer helpful.
  • Asked by Rich from Colorado Springs, Co
    10/15/2016
    Q
    Is the Origin Point Brands Barrier Gate effective for keeping livestock out of an area?
    A

    The Origin Point Brand Barrier Gate is primarily used for preventing unauthorized vehicle traffic in an area not livestock as they would be able to go under it.

    Was this answer helpful to you?   Yes No
    13 of 15 people found this answer helpful.
  • Asked by Bill from Oakhurst, California
    10/01/2014
    Q
    What is the diameter of the pipe that is used for the Origin Point Brands Barrier Gate?
    A

    The Origin Point Brands Barrier Gate does not come with a pipe. Here is a list of the parts:

    One Barrier Gate Assembly (5 ft. to 12 ft)
    Two Hinge Brackets
    One Lock Bracket
    Two 1/2 in. x 1-1/2 in. Hex Bolt
    Two 1/2 in. Hex Nuts
    Two 1/2 in. Lock Washers
    Two 1/2 in. Flat Washers
    Two 1/2 in. Nylon Washer
    Four 1/2 in. x 3-1/2 in. Lag Bolts
    Two 1/2 in. x 1-1/2 Lag Bolts
    One 10 mm Set Screw (fine thread)
    3/8 in. x 1 in. Shipping/Set Screw (coarse thread)

    Was this answer helpful to you?   Yes No
    12 of 50 people found this answer helpful.
  • Asked by Jer from Aiken, Sc
    04/21/2018
    Q
    Can this Origin Point Brands Barrier Gate be used with a gate opener?
    A

    The manufacturer of the Origin Point Brands Barrier Gate does not recommend using the gate with an electric opener.

    Was this answer helpful to you?   Yes No
    8 of 10 people found this answer helpful.
  • Asked by Ps from Fernandina Beach, Fl
    04/24/2018
    Q
    Can Origin Point Brands Barrier Gate come in another color besides green?
    A

    Origin Point Brands Barrier Gate is only available in green.

    Was this answer helpful to you?   Yes No
    5 of 5 people found this answer helpful.
  • Asked by Nick from San Jose, Ca
    09/15/2019
    Q
    Can the Origin Point Brands Barrier Gate be attached to a metal post?
    I noticed on the packaging that, hardware to attach gate to steel post could be purchased separately, but I can't seem to find a link to buy it. Could you clarify what kind of hinge I would need?
    A

     Pressure treated lumber is typically best used with the Origin Point Brands Barrier Gate and it comes with the hinge brackets.

    We would recommend you contact the manufacturer directly Origin Point Brands at 1.800.607.6409 for information on steel post mounting.

    Was this answer helpful to you?   Yes No
    4 of 4 people found this answer helpful.
  • Asked by Joe
    04/03/2018
    Q
    What is the distance between the two hinges on the Origin Point Brands Barrier Gate?
    A

    This distance between the hinges on the Origin Point Brands Barrier Gate is 22 3/4 inches. You can view the full dimensions and installation instructions here.

    Was this answer helpful to you?   Yes No
    3 of 4 people found this answer helpful.
  • Asked by Alicia from Miami, Fl
    07/07/2018
    Q
    Can the Origin Point Brands Barrier Gate be easily painted?
    Can the gate be easily painted white? I'm looking for a white gate to go with the rest of the neighborhood community fencing.
    A

    We dont see any reason why you would not be able to paint the Origin Point Brands Barrier Gate. We would recommend that you use an outdoor paint that is designed for application to metal or multiple surfaces outdoors for best adhesion and longevity on the gate. Due to the dark green color of the gate you may need to apply 2 coats of white paint to fully cover the color and have it match the fencing. 

    Was this answer helpful to you?   Yes No
    3 of 5 people found this answer helpful.
  • Asked by Steve from Pickett, Wi
    08/18/2014
    Q
    What is the "gauge" of the padlock "u' at the end of the arm?
    I'm interested in the thickness of the material that makes the "u". In other words, is it bolt-cutter-proof?
    A
    We would recommend you contact the manufacturer directly Origin Point Brands at 1.800.607.6409 for the dimensions you are needing.
    Was this answer helpful to you?   Yes No
    3 of 19 people found this answer helpful.
  • Asked by Don from Des Moines, Ia
    04/26/2017
    Q
    How does the Origin Point Brands Barrier Gate extend from 5ft to 12ft?
    It's hard to see how the extension works from looking at the picture
    A

    The Origin Point Brand Barrier Gate has internal extension arms that extend to the desired length. Please refer the the product label and installation diagram here

    Was this answer helpful to you?   Yes No
    2 of 5 people found this answer helpful.
  • Asked by Rob from Denver Colorado
    02/24/2020
    Q
    Can gate be mounted to a bollard?
    A

    Pressure-treated lumber is typically best used with the Origin Point Brands Barrier Gate and it comes with the hinge brackets.

    We would recommend you contact the manufacturer directly Origin Point Brands at 1.800.607.6409 for information on steel or concrete post mounting.

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Raine from Atlanta
    01/14/2020
    Q
    Opening and closing
    It's stated on one of the answers that this gate is not intended for frequent opening and closing? Why? So it would not be recommended for use in a residential driveway?
    A

    The Origin Point Brands Barrier Gate is used for preventing unauthorized vehicle traffic on private roads, running/bike paths, camp grounds, farm entrances, golf courses, hunting camps and cottages.

    Was this answer helpful to you?   Yes No
    1 of 6 people found this answer helpful.
  • Asked by Jon from Port Republic
    02/03/2020
    Q
    How thick is the metal on the Origin Point Brands Barrier Gate?
    What gauge is the metal?
    A

    The Origin Point Brands Barrier Gate is constructed of 14.5 gauge welded 1.83 ml steel.

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Mark from Weaverville, Ca
    01/03/2020
    Q
    Can you mount a solar panel device for this Origin Point Brands Barrier Gate to open?
    A

    We have spoken with the manufacturer, and they said that you could use an automatic opener on the Origin Point Brands Barrier Gate, however it would void the warranty.  They stated that these gates are not intended for motorized openers that open frequently. These gates are intended more to prevent traffic from entering an area.  We would recommend you contact the manufacturer directly Origin Point Brands at 1.800.607.6409 for further information.

    Was this answer helpful to you?   Yes No
    1 of 2 people found this answer helpful.
  • Asked by Tim
    01/03/2021
    Q
    Does the Origin Point Brands Barrier Gate lock in place at its base so it won't swing?
    Or do you need to pad lock it to a wood post on the opposite side of the roadway?
    A

    The Origin Point Brands Barrier Gate has a metal loop at the end of the arm with the intention of attaching it to a post. You could possibly configure something from a hardware store to block the hinge from moving on your main installation post to keep it from swinging. 

    Was this answer helpful to you?   Yes No
  • Asked by Jeffery from Nashport,ohio
    01/18/2021
    Q
    Is the Origin Point Brands Barrier Gate available in a 20ft version?
    I need to put up gates on an opening around 40ft. What is my options?
    A

    Unfortunately, we do not have the 20 FT version of the Barrier Gate. 

    Was this answer helpful to you?   Yes No
  • Asked by Howard from Santa Rosa Beach, Florida
    08/03/2021
    Q
    Can the Origin Point Brands Barrier Gate be used in regions where it will be exposed to salt air in the Gulf of Mexico? Is the powder coating on the inside and outside steel parts and the gate has stainless steel hardware otherwise? Should steel posts be used for mounting instead of 6 x 6 wood beams?
    A

    It would be recommended that you apply an anti-corrosive paint to the gates and with regular field maintenance to deter corrosion with a wire brush would lengthen the life of the product.  This gate is made with steel, aluminum alloy and some parts are plastic.  We would recommend using a wooden post for mounting. 

    Was this answer helpful to you?   Yes No
  • Asked by Tom from Farmington, New Mexico
    08/09/2021
    Q
    Can 2 Origin Point Brands Barrier Gates be mounted on either side with one gate upside down to attach a panel to them?
    I would install extra post support and a crossover bracket at the end, is this feasible? Looking to stop foot and vehicle traffic.
    A

    We recommend referring to the Origin Point Brands Barrier Gate Specs and Diagrams provided in the installation guide regarding any customizations or details to meet your specific needs.   

    You can also contact the manufacturer Origin Point Brands directly for further technical or product support questions. They can be reached by calling (800) 607-6409, or by visiting their website's contact page here.

    Was this answer helpful to you?   Yes No
Displaying 1 to 20 (of 26 questions)