With most products like Prime Source Propiconazole 14.3 Select Fungicide, you will want to not mow your yard 2 days prior to application or 2 days after application to ensure it is fully absorbed into the yard and to see the full results.
It is recommended to water in herbicide and fungicide products like Prime Source Propiconazole 14.3 Select Fungicide if you are doing a preventative application or treating foliar diseases because the product needs to get down to the root system. You should allow the sprayed area to dry completely before irrigation or rainfall (usually at least 24 hours is best).
Prime Source Propiconazole 14.3 Fungicide would not be recommended to be used in a hose end sprayer as the instructions do not give a rate per gallon when treating lawns. They give an amount per 1000 sq ft depending on what you are treating for. You use that rate in however much water it takes for you to cover the area.
Prime Source Propiconazole 14.3 Select Fungicide is applied at 1-2 fl oz per 1,000 sq feet every 14-21 days for zoysia brown patch. You may also want to take a moment to review our Brown Patch Lawn Care Guide.
The only difference between Prime Source Propiconazole 14.3 Select Fungicide made by Prime Source and Propiconazole 14.3 made by Quali-Pro is the manufacturer. The labels are the same and both products have Propiconazole 14.3%. There are various reasons why certain products cannot be sold to certain states, but in this case, the product is not registered in your state by the manufacturer.
Prime Source Propiconazole 14.3 Select Fungicide is best applied when the lawn is dry
Prime Source Propiconazole 14.3 Select Fungicide would be mixed at the rate of 1-2 oz. per 1000 sq. ft., and Azoxy 2SC is 0.38-0.77 oz. per 1000 sq. ft. You can either spot treat or broadcast depending on how widespread the disease is. If just spot treating be sure to at least spray a few feet out around the effected area to be sure everything is covered.
Prime Source Propiconazole 14.3 Fungicide would not be recommended for use in a hose end sprayer as the instructions do not give a rate per gallon when treating lawns. They give an amount per 1000 sq ft depending on what you are treating for. You use that rate in however much water it takes for you to cover the area.
Prime Source Propiconazole 14.3 Select Fungicide is not labeled for pythium blight. You can use Subdue Maxx or Prime Source Regulate instead.
Here are a few tips for getting rid of Pythium Blight:
Yes, Prime Source Propiconazole 14.3 Select Fungicide is labeled for use on roses. Please see the product label for specific application instructions.
Mixed Prime Source Propiconazole 14.3 Select Fungicide solution needs to be used within 24 hours of mixing.
Prime Source Propiconazole 14.3 Select Fungicide will only target listed diseases and will not affect insects.
Yes, you can apply Prime Source Propiconazole 14.3 Select Fungicide to new sod.
First, you need to determine the diameter of the tree that you are treating. Dilute 10mL of Propiconazole 14.3 Select in up to 1 liter of water per inch of trunk diamter. If your tree is 15 inches in diameter then you would use 150mL of Propiconazole 14.3 Select with NO MORE THAN 15 liters of water. Please refer to the Product Label for complete use instructions.
Yes, Prime Source Propiconazole 14.3 Select Fungicide can be used safely on St. Augustine grass safely for the diseases listed on the product label.
Prime Source Propiconazole 14.3 Select Fungicide is a Group 3 fungicide.
For treating Brown Patch in turfgrass, Propiconazole 14.3 Select Fungicide is applied at the rate of 1-2 fl oz per 1000 sq ft. For prevention, begin applications in May or June before disease is present and it is recommended to tank mix Propiconazole with a registered contact fungicide such as Azoxy 2SC at the labeled rate for best results.
Under conditions of high temperatures and high humidity, use the higher rates of Propiconazole 14.3 Select Fungicide and shorter application intervals. Repeat applications every 14-21 days while disease is present is suggested. Please view the product label for more information.
For Brown Patch, Prime Source Propiconazole 14.3 Select Fungicide is applied at 1-2 fl oz per 1000 sq ft in for 2-3 applications at 14-21 day intervals. Mix in sufficeint water volume (1-2 gallons of water) to evenly cover 1000 sq ft.
Brown Patch is a foliar disease therefore it is recommended to tank mix Propiconazole with a registered contact fungicide such as Azoxy 2SC Fungicide for best results.
Please view our Brown Patch treatment Guide and refer to the product label for complete application instructions.
Prime Source Propiconazole 14.3 Select Fungicide can be mixed with other fungicides but that you should check compatibility before tank mixing as explained on the product label.
