Enable 2F Fungicide

DIRECTIONS FOR USE:

Application Directions:

Do not make ground or aerial applications within 75 feet of streams, rivers, ponds, lakes or reservoirs.

Ground Application:

Thorough coverage sprays generally result in optimum disease control. To achieve good coverage use proper spray pressure, gallonage per acre, nozzles, nozzle spacing and tractor speed. Consult spray nozzle and accessory catalogues for specific information on proper equipment calibration. For tree fruits and nuts, apply the same amount of Enable 2F per acre in either dilute or concentrate sprays.

Aerial Application:

Apply in a minimum of 5 gallons of water per acre on annual crops and 10 gallons of water per acre on perennial tree fruits and nuts. Do not apply Enable 2F under conditions when uniform coverage cannot be obtained or when excessive spray drift may occur. Do not apply directly to humans or animals. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Flagmen and loaders should wash thoroughly before eating, drinking, or smoking and at the end of each day's spray operation.

Orchard Use:

Apply Enable 2F to orchards using a dilute or concentrate spray.

Dilute Spray: Dilute or thorough coverage applications are based upon the amount of spray solution necessary to thoroughly wet the trees until spray run-off. To determine the number of gallons of dilute spray required per acre, contact your state agricultural experiment station, certified pest control advisor, or extension specialist for assistance.

Concentrate Spray: Concentrate spray applications assume all of the tree is uniformly covered with spray solution but not to the point of run-off. A lower spray volume is used to deliver the same application rate per acre as used for a dilute spray. Use a minimum of 50 gallons of spray solution per acre for concentrate sprays with Enable 2F.

USES:

BANANA:

• sigatoka - 6 fl. oz. per acre.

Use Directions: Apply when leaves first appear and repeat every 14 to 21 days or as required. Best control of diseases is achieved on a protectant application schedule and when an emulsifiable spray oil is added to the spray solution. Apply aerially in a minimum of 10 gallons of water per acre or by ground in a minimum of 20 gallons of water per acre.

Restrictions:

• Do not make more than 8 applications of Enable 2F (0.75 lb active) per acre per year.
• Preharvest Interval: Up to day of harvest.
• Do not graze livestock in treated areas.
• Do not cut cover crops for livestock food.
• Do not apply this product by chemigation to banana.

CITRUS FRUITS (Crop Group 10):

Citrus fruits (crop group 10) including calamondin, citrus citron, chironja, citrus hybrids, grapefruit, kumquat, lemon, lime, orange (sour, sweet, mandarin), pummelo, satsuma mandarin, tangerine, tangelo, tangor

Apply aerially in a minimum of 10 gallons of water per acre or by ground in a minimum of 20 gallons of water per acre. Obtain optimum disease control by applying Enable 2F with a nonionic surfactant or spray oil at the manufacturer’s specified rate and making thorough coverage applications.

• greasy spot - 8 fl. oz. per acre.
  • Use Directions: Make the first application at the normal timing for greasy spot in your area. Make a second application for control of greasy spot of foliage and rind blotch of fruit after the first summer flush. Application for control of greasy spot may also occur at other times.
• scab - 8 fl. oz. per acre.
  • Use Directions: Make the first application between feather flush and 25% expansion of spring leaf flush. Make a second application at petal fall. Follow 3 to 4 weeks later with another fungicide for control of late scab and early melanose.
• sooty mold - 8 fl. oz. per acre.
  • Use Directions: Applications made for control of greasy spot or scab will also control sooty mold.

Restrictions:

• Do not make more than 3 applications or apply more than a total of 24 fl. oz. of Enable 2F (0.38 lb. active) per acre per year.
• Preharvest Interval: Up to day of harvest.
• Minimum Re-treatment Interval: 21 days.
• Do not allow livestock to graze in treated areas.
• Do not apply Enable 2F with polymer-based spray adjuvants.
• Do not apply this product by chemigation to citrus.

PECAN:

• downy spot, gnomonia leafspot, leaf blotch, powdery mildew, scab, vein spot - 8 fl. oz. per acre.

Use Directions:

Begin applications at bud break and continue at 10- to 14-day intervals through pollination. Apply at 14- to 21-day intervals through the cover sprays. Apply aerially in a minimum of 10 gallons of water per acre or by ground in a minimum of 20 gallons of water per acre.

Restrictions:

• Do not make more than 6 applications or apply more than a total of 48 fl oz of Enable 2F (0.75 lb active) per acre per season.
• Preharvest Interval: Do not apply after shuck split or within 28 days of harvest.
• Do not graze livestock in treated areas or feed cover crops grown in treated areas to livestock.
• Do not apply after shuck split.
• Do not apply this product by chemigation to pecan.

PEPPERS:

• cercospora leaf spot, powdery mildew - 6 to 12 fl. oz. per acre.

Use Directions:

• Begin applications when disease is first observed. Reapply 10 to 14 days later or as necessary for the level of disease pressure present.
• Apply uniformly in a spray volume that assures thorough coverage of the crop. A minimum spray volume of 30 gallons per acre is necessary. Disease control may be reduced at low spray volumes or if spray coverage is inadequate.
• For optimal disease control, apply as a ground application. Aerial application is permitted; however, disease control may be reduced when product is applied by air.
• For optimum performance, add a nonionic surfactant to the solution.

Restrictions:

• Do not apply more than 12 fl oz of Enable 2F per acre per application or more than a total of 48 fl oz of Enable 2F (0.75 lb active) per acre per crop.
• Do not make more than 2 consecutive applications of Enable 2F. Alternate within 14 days with a product that is effective on the target pathogen and has a different mode of action than Enable 2F.
• Preharvest Interval: Do not apply within 7 days of harvest.
• Minimum Re-Treatment Interval: 10 days
• Chemigation: Do not apply this product through any type of irrigation system.

SUGARBEETS:

• cercospora leaf spot, powdery mildew - 8 fl. oz. per acre.

Use Directions:

• Apply Enable 2F at intervals of 14 to 21 days beginning when conditions are favorable for disease development.
• For resistance management, alternate applications of Enable 2F with a nontriazole fungicide labeled for use on sugarbeets.
• For optimum disease control, an adjuvant, such as crop oil concentrate that is labeled for crop use, may be added to the spray mixture at the manufacturer’s specified rate. Add an adjuvant to the spray solution last.
• For best spray coverage of foliage, apply aerially in a minimum of 5 to 7 gallons of water per acre or by ground in a minimum of 20 gallons of water per acre.

Restrictions:

• Do not make more than 2 applications or apply more than a total of than 16 fl oz of Enable 2F (0.25 lb active) per acre per year.
• Preharvest Interval: Do not apply within 14 days of harvest.
• Do not apply this product by chemigation to sugarbeets.

Environmental Hazards:

This product is toxic to fish. Do not apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high-water mark. Drift or runoff from treated areas may be hazardous to aquatic organisms in adjacent aquatic sites. Do not contaminate water when disposing of equipment washwaters or rinsate.